All Forum Comments
Comment by fritzthedog posted on F lens and FAJ lens not recognised by MZ-7 - Help! at 11/03/2013 - 08:47
Carl
Comment by fritzthedog posted on SP1000 at 09/03/2013 - 14:04
Only problem is I am struggling to find a battery to fit. I have several cards of varying sizes but none of them fit.
Does anybody know what size battery this camera takes?
Carl
Comment by fritzthedog posted on SP1000 at 09/03/2013 - 12:38
Comment by fritzthedog posted on Strip and rebuild at 08/03/2013 - 20:34
I haven't used this camera for years but fancy bringing it out of mothballs for a play this year.
Mine is in great condition - except for a badly dented base plate and a lot of paint missing off the door edge - would be nice to try an bring the old girl back to decent condition - for a long time my favourite film body.
I bought a cheap "good condition but not working" one off the auction site recently hoping to take the door and plate off it but it turned out to be in worse condition than mine and has been returned!
Regards
Carl
Comment by fritzthedog posted on WTB Pentax Super A parts at 08/03/2013 - 12:47
Carl
Comment by fritzthedog posted on Jackie on the River Dee at 07/03/2013 - 20:04
Carl
Comment by fritzthedog posted on Compatibility at 07/03/2013 - 18:10
First impression - very nice - great balance - love the glass like water and star-burst street lights against the bold red of the boat
Second impression - hate that concrete monstrosity behind the boat and now can't see anything else
Carl
Comment by fritzthedog posted on Jackie on the River Dee at 07/03/2013 - 17:59
Carl. I think it might be a good idea to explain what a feeler gauge is for those that are not mechanically minded. Also which one you used.
0.0015" (0.0375mm) or larger? poss. a .004" (0.1mm) or 0.008" (0.2mm) would be stiff enough?. I think in either imperial OR metric but some these days think only in metric. I've removed Ricoh pins from 2 lenses that I own. JUST IN CASE!
CHEERS Vic.
Good point! Also agree it is a good idea to remove the pin "in case" - 2nd one I got stuck - I hadn't actually noticed it was an a/r or wouldn't have attached it in truth.
OK - feeler gauge - a slim piece of metal used for measuring gaps - generally in engineering - normally come in sets of varying thicknesses. In the 'good old days" most motorists who maintained their own vehicles would have owned a set for setting the gaps on spark plugs etc.
Which one did I use - I have to say that I can not remember - I have both imperial and metric sets. It needs to be thin enough to go in the gap and stiff enough to move the pin (some are so thin that they are very soft and too flexible)
For those without access to a set of gauges - the other method is to use a razor blade -easier if you can buy a packet of the old style wet blades - but also doable by removing the blade from a safety razor - just slide the blade in same as you would the feeler gauge - razor blades are both thin enough and rigid enough for the job.
So Vic - if you have a set of gauges - a micrometer and a razor blade - you should be able to work out which gauge = a razor blade in metric and imperial - sounds like a rainy day job to me
Carl
Comment by fritzthedog posted on Lens does not properly fit in Pentax K-01 at 07/03/2013 - 12:54
I can confirm that it does NOT leave the leader out if you rewind mid roll.
Regards
Carl
Comment by fritzthedog posted on MZ50 film removal at 07/03/2013 - 09:17


I have the entire MZ series and both of these lenses and have not noticed any issues with the 7
Carl