pentaxian450

Joined: 10th February 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

pentaxian450
The "31" is more or less the same price as the "77". If you can afford the "77", then you can afford the "31".

I have all three FA Ltd lenses, and in studio work, they're outstanding. In very high contrast situation, they do tend to show quite a bit of purple fringing.

Their compact size and lightweight makes it easy to handle the camera lens combo for a long session, especially when the grip is not on the camera, but to use them manually, you have to switch AF off on the camera. They don't have quick shift to change focus after AF has locked on.

They really shine on the K-3.

Comment by pentaxian450 posted on 77mm 1.8 limited lens at 21/12/2014 - 01:52

pentaxian450
Did you unwrap ALL the gifts?

Comment by pentaxian450 posted on One from todays model shoot with the stunning Chelsie. Nothing more to say..... at 17/12/2014 - 02:11

pentaxian450
If it can make you feel better, service is no better here in Canada.

It took Pentax three months to repair my DA*50-135. Unfortunately, Pentax Canada is a subsidiary of Pentax America (Ricoh), and they have to order parts from the USA, and the USA orders them from Japan. It took six weeks just to get the parts.

As you likely understand, Pentax USA doesn't give a fart about Canada. If they receive the parts, and an American customer needs them, well it's tough luck. They'll fix the American gear, and you wait for the other set of parts to get shipped from Japan.

At least, that's what I was told by the technician who fixed my lens. I was lucky enough (really, really lucky) to catch him on a Saturday morning while he was working on my lens, and that's what he told me about the delays.

Comment by pentaxian450 posted on High & Dry Customer Service at 17/12/2014 - 02:08

pentaxian450
pafu_pafu wrote:
richardmills wrote:
Has the 50-135 ever worked on the z1 as a screw drive?
Yes it did!
If it used to work on the screwdrive of the Z-1, then the problem is likely a (lack of) communication problem between bodies and lens.

Have you checked the contacts?

Comment by pentaxian450 posted on DA* 16-50 & 50-135 SDM problem. at 22/11/2014 - 19:08

pentaxian450
richardmills wrote:
Yeah Alan said it could be about 3 weeks to get a motor from pentax.
Can't be worst than Canada. It takes three weeks to receive the parts from Pentax U.S.A. If Pentax U.S.A. doesn't have it in stock, it takes another three to five weeks. All in all, my 50-135 has been at Pentax Canada for 7 weeks, and still not done.

I'm pi$$ed off and a half.

Comment by pentaxian450 posted on Service Cost at 15/11/2014 - 18:25

pentaxian450
Eddie, I wish you a speedy recovery.

If it can help you, my wife has cerebral palsy, and has only partial use of her left side, and almost no use of her right side. That doesn't keep her from enjoying photography (with quite a few wonky "horizons":wink. If she can manage, I'm pretty sure you'll be able too.

Good luck, and follow your dream.

Comment by pentaxian450 posted on A Plea to All Members - Please help at 01/11/2014 - 02:29

pentaxian450
Smeggypants wrote:
you need to grind this off on a segment of the lens mount in order for stop down metering to work
...or put a piece of foil over the contacts.

Comment by pentaxian450 posted on (manual focus) Tokina Lens Problem! at 23/10/2014 - 10:18

pentaxian450
Horst wrote:
I think less dof would not show up the nice greenery in the back ground.
That's not shallow DOF. Beside, some backgrounds gain to be blurred, some don't.

In some cases, very shallow DOF is a necessity.

Comment by pentaxian450 posted on Full frame at 25/09/2014 - 10:16

pentaxian450
hoopsontoast wrote:
at least you would not need as fast lenses if the high ISO performance is better.
The fast lenses are still a must for shallow depth of field.

Comment by pentaxian450 posted on Full frame at 24/09/2014 - 12:15

pentaxian450
I don't know much about the Yongnuo flashes, but the first flash might be a pre-flash just before the shutter opens. If you have only one properly exposed "image" on the frame, then that's it.

If the two flashes do happen when the shutter is open, then you would see two more or less properly exposed images on the same frame.

Comment by pentaxian450 posted on trailing curtain sync on YONGNUO YN560-III at 20/09/2014 - 18:11

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo