pentaxian450

Joined: 10th February 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

pentaxian450
SteveLedger wrote:
My understanding is that it's less to do with modern lenses but more to do with film v digital sensor.
UV filters were developed for film because with old film cameras it was often necessary to use a UV filter as film is extremely sensitive to UV light. But digital sensors are much less sensitive to UV, in any case manufacturers actually add UV and IR filters to the sensor.
Actually, some sensors are more sensitive to U.V. light than films.
U.V. filters in front of the sensor are there for "normal" U.V. levels, not for high altitude or snowy scenery levels.

Comment by pentaxian450 posted on Protection Filters at 04/08/2015 - 13:56

pentaxian450
davem wrote:
As far as I understand modern lenses are not affected by UV as the optics can handle it.
This is not exactly true, but not entirely false.

In some case, like high altitude or snow scene, a good U.V. filter is a must to "kill" the excess blue that will appear in the picture.

It is a lot easier to put a good U.V. filter on the lenses in such instance then trying to get rid of the blue cast in shadows in post production.

Comment by pentaxian450 posted on Protection Filters at 03/08/2015 - 03:05

pentaxian450
McGregNi wrote:
These services use pro-grade interpolation software to effectively boost the resolution of your file ...a bit like commercial advertising when they create massive road-side posters,
They don't boost resolution for billboards. You never get close enough to see the dots, and most of them are printed on large flatbed silkscreen machines that don't really like "fine screens".

If you could get close enough, you'd how large the dots are.

Comment by pentaxian450 posted on How much resolution do I really need? at 23/07/2015 - 18:04

pentaxian450
You should also try to shoot with your lenses wide open. At f/16, it will always look sharp.

Comment by pentaxian450 posted on Effect of AF fine tuning left on at 07/03/2015 - 00:21

pentaxian450
50mpCMOS wrote:
That 16-50 is by far one of the worst examples of PK ever made; nothing comes close. I'd even settle for any of the entry level lenses before wanting or needing to use the 16-50
That's the opinion of someone who never worked with one.

Mine is the best Pentax standard zoom I've ever had. It's now going on it's seventh year without ever letting me down.

I've had my 50-135 repaired BECAUSE I dropped it on a concrete floor. Otherwise, it woks flawlessly.

Comment by pentaxian450 posted on To repair or not to repair? DA* 16-50. at 16/02/2015 - 00:08

pentaxian450
K10D wrote:
Canon and Pentax have the same 2.5mm stereo jack.
Pro Canon use a different jack, so be careful if you order a Canon make or "designed for".

Comment by pentaxian450 posted on Pentax Remote Control F at 16/01/2015 - 02:33

pentaxian450
To double the illumination of a subject, you need to quadruple the power of the light(s). This is due to the fact that when you double the distance between light and subject, the light will illuminate four times the area. It actually is the same progression as the f stop on a lens. You can easily verify this with a lux meter.

Doubling the ISO, the flash will reach only 1.41X further, not twice as far.

This is due to an "obscure" physic law: it is called the "inverse square law".

Comment by pentaxian450 posted on Studio Flash head units at 13/01/2015 - 02:22

pentaxian450
Blythman wrote:
doubling the ISO from 100 to 200, will effectively double their power.
Not quite. It will only "increase" the power by 1.41. To "double the power", you need to go to ISO 400.

Comment by pentaxian450 posted on Studio Flash head units at 11/01/2015 - 14:45

pentaxian450
The Sigma EF610DG Super will do everything the Metz flash can do at a fraction of the cost. BUT the Sigma flash doesn't have a very intuitive interface. Nevertheless, I have three Sigma flashes, and have no problems with them.

They will work perfectly in wireless mode, focal plane, rear sync...

Comment by pentaxian450 posted on Flash to accompany K5ii for wedding use at 31/12/2014 - 22:04

pentaxian450
If I remember correctly, on some Pentax DSLR, there is an option to override the setting inputted by the user if a proper exposure can't be obtained. Worth looking into.

Comment by pentaxian450 posted on Losing DoF at 22/12/2014 - 02:06

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo