I did read the DPReview tour of Leica and the M9 hands-on. I'm surprised that people are just ditching their DSLRs. After all the M8/M9 are rangefinder cameras with manual focus! I understand that it's probably a doddle to focus when you get the hang of it - but I can imagine some niggles as they cross over from fully autofocus with 5 million AF points (ok I exaggerated! )...

Matt

Given the price of the M9, I wonder where they get the money
Perhaps it's all the FSTE100 directors that made the news this morning...
Matt

Just to add a little more info to my previous post (in case it was confusing!)...

The Leica M8 has big issues with Infra-Red (IR) bleeding which seriously affected the image quality. M8 users had to put an IR-cut filter on the front of the lens to resolve the issue. Thankfully for those rich enough to afford Leica gear, the new M9 has a much better IR-cut filter in front of the sensor.

So, that led me to thinking about dSLR design. The sensors have IR-cut filters (in fact the K20D & K10D have quite a severe one compared to the original *ist-D which wasn't too bad for IR photography). But of course the optical path for the AF sensor (which sits beneath the mirror) and the exposure metering sensor (which sits on top of the pentaprism) is different.

Then I wondered about what's different between the K20D and the K7, and why the flash exposure seems to be more "what you expect" on the K7. Of course, the exposure meter is completely different - now a 77 segment meter.

So, my little test using a standard Infra Red remote control (actually a "6-in-1" remote with a heavy duty IR LED) shows that the metering is sensitive to IR. Consequently, if you have a situation where there's a fair bit of IR light - but no visible light - then the metering may say "Wow! That's bright, better stop down a bit", but then the sensor will not record the IR component at all. It's possible that you'd get what appears to be an underexposed shot.

And of course, for flash, the P-TTL system uses the same 16-segment exposure meter to determine the flash power. At the moment I can't prove my assertions because I don't have a light spectrometer handy. However, it may be that the flash guns output a fairly broad spectrum of light which may include some IR (and possibly UV) components. If that's the case, then it might be that the metering is seeing these IR components and making a wrong choice.

Finally, there were reported issues of focus errors in low light levels with tungsten lamps. I've seen it myself - snapshots of chicks under a warming lamp etc. And of course, there'll be a goodly amount of IR in that! It may well be that the AF mechanism is picking up on the contrast in the IR region and getting a 'dud' focus sometimes. (Anyone who's used manual SLRs of the old days will remember the focus adjustment markers for when you are shooting IR )

Anyone care to comment, or help me out with some comparative tests on the K7??



Matt

Tim,
It's standard marketing in the world of panels - and actually would have originated from the manufacturer of the LCD panel
That's one of the reasons I had to test with a real images
Matt

It's either 11x or 14x...
I did some tests a while back to determine the exact 1:1 point.
This thread explains my findings on page 3.

(If you're interested, I created a single pixel line in Photoshop then managed to get the JPG image back into the K20D so it could view it.)

HTH!
Matt

Just to add that since the flash is pulsed (to illuminate the sensor as the open strip of shutter proceeds) the total power of the flash is normally reduced by 50%.

There is hardly any difference between 1/180 and 1/250. In fact, in some cases the Pentax has an advantage e.g. the Nikon D700 has a sync speed of 1/250 but a low ISO200. The Pentax has a low ISO100 and 1/180 - so that's about 2/3 of a stop better for the Pentax

But HSS mode allows full fill-in flash outdoors. Works really well

Matt

Hi all,
Just an interesting thing that came to me in a bit of inspiration... having read about the Leica M9 and the issues that beset the M8.

Had to test it first, but the K20D meter is sensitive to IR

Try this:
* Darkish room
* Spot metering, Av mode
* Take a remote control and point at centre of meter area
* Press remote and the exposure changes!

Can anyone try this with the K7? I wonder if they've introduced an IR cut filter over the AF and/or metering. It may well explain some of the issues with flash metering and focus under tungsten light

Also, has anyone got an IR-cut filter they could try in front of the lens??

Matt

Shocking!

There's a shot of me on epz: http://www.ephotozine.com/u16488/about
Trouble is you'd probably not see my face if I'm on a photo shoot - it'll be behind the K20D+grip

Shame there aren't Pentax User badges as there are on epz...
(an embroidered one would be good to sew on the camera bag)
Matt

Cool