All Forum Comments
Comment by Mannesty posted on Sunrise Sunset times; try again at 20/02/2009 - 12:17
Comment by Mannesty posted on Pentax Browser and Photo Laboratory update 3.61 at 20/02/2009 - 12:16
If anything is damaged, it'll be that filter, not the sensor.
It is possible to replace them but it's not a job I would undertake.
This might be a good case for a conversion to IR where the filter is replaced with an R72 filter. The camera is rendered useless for colour work but IR photography becomes a dream as you have bright viewfinder and can use 'normal' shutter speeds.
I watched a Canon 30D with a damaged sensor/filter sell on ebay recently for over £200.
Comment by Mannesty posted on New Sensor? at 20/02/2009 - 06:58
To use a shutter speed higher than 1/180th, you'll need to use high speed synch. You too can use a shutter speed of 1/4000th if you want to.
If you mean your shutter doesn't fire when you use a manual lens, you need to change the custom menu setting to permit use of aperture ring.
Hope that helps.
Comment by Mannesty posted on 540 help at 19/02/2009 - 08:00
Success is simple. Have a shop in an easily accessible location, employ knowledgeable unbiased staff, stock kit that people want to buy, and sell it at a competitive price.
Oh, I forgot to mention, you'll need a shed load of money to start with unless you can find a bank to borrow from
Comment by Mannesty posted on Jessops and Pentax - again at 18/02/2009 - 16:03
Hello and Welcome Jin,
You will lean English here please post photos in the gallery for us to see.
Comment by Mannesty posted on Hello~pentax user from Corea at 18/02/2009 - 15:57
Either of these versions will fit any Pentax K mount camera, including DSLR's.
Comment by Mannesty posted on Asahi Pentax 1:2 50mm at 18/02/2009 - 10:33
. . . Has anyone noticed the lens hunting for focus . . .
AF in macro is a hindrance, not a benefit.
Comment by Mannesty posted on pentax 100 2.8 smc dfa VS sigma 105 2.8 at 17/02/2009 - 23:06
Select Category = Cameras & Sub-Category = Medium format.
Comment by Mannesty posted on Pentax 67, meter prism help! at 16/02/2009 - 16:51


The nearest I have is a SMCP-M 400mm 1:5.6 lens.
Settings: ISO 100, f16, 1/125th
My findings:-
P-TTL mode on flash - flash fires and discharges 100%. Note that when the shutter button is pressed halfway, the flash switches to TTL mode, which is not supported on the K20D, hence the flash fully discharges.
A mode on flash - flash fires and exposure is as expected, slightly underexposed.
M mode on flash - flash fires and exposure is as expected, slightly underexposed.
My subject is a white eagle statue on a pine backed shelf.
Result: Everything works as expected.
Try firing the flash with no lens on the camera and tell us what happens.