All Forum Comments
Comment by ChrisPlatt posted on Pentax LX at 04/03/2012 - 20:30
Chris
Comment by ChrisPlatt posted on K2, KX, KM, K1000 ? at 26/02/2012 - 03:23
The other MZ series bodies most definitely are not.
Chris
Comment by ChrisPlatt posted on MZ S at 19/12/2011 - 02:26
Chris, for anything with a dual-curtain shutter it's pretty easy to adjust, and can be tested using a CRT monitor/TV
As for checking the meter, the easiest way as far as I can tell would be to use a DSLR to meter a plain surface and use that as a benchmark.
Exposure meter adjustment is performed using a calibrated light source.
Your homebrew CLA would confirm functionality at some level
but does not constitute a proper alignment to factory specs.
Chris
Comment by ChrisPlatt posted on CLA LX vs MX at 03/12/2011 - 18:46
and adjustment as required. No amateur I know has the equipment or skills required.
Chris
Comment by ChrisPlatt posted on CLA LX vs MX at 28/11/2011 - 12:18
back to market some of their films in 110 cartridges.
Chris
Comment by ChrisPlatt posted on I know I shouldn't have bought it at 16/11/2011 - 01:49
Chris
Comment by ChrisPlatt posted on K1000 on ebay at 15/11/2011 - 02:32
A linear polarizer will cause erroneous readings on a Pentax LX in manual mode.
Chris
Comment by ChrisPlatt posted on polariser at 03/10/2011 - 20:27
If not they will jam. This is critical. Use a hair dryer if necessary.
I love my Paterson tanks but they do sometimes leak.
If leaking around the top seal unscrew the cover 1/4 turn and retighten.
If the cap leaks remove it and reinstall, "burping" if necessary.
A hard rap on a firm countertop should dislodge any air bubbles.
Chris
Comment by ChrisPlatt posted on Developing tanks, old but boxed. Info? at 15/09/2011 - 02:18
I worked in the camera repair department at Olympus USA.
Many cameras that came in for repair had smudged mirrors.
We would wrap several layers of lens tissue around
the end of a long tweezers, and dip this in Freon.
Any good liquid lens cleaner should work as well.
Make sure it's well moistened, but not dripping wet.
Rub gently for a few seconds until the smudge is gone.
If you hold the camera mirror down and work carefully
you won't come near the focus screen or mirror bumper.
Chris
Comment by ChrisPlatt posted on Cleaning the mirror. at 15/09/2011 - 01:49


Chris