All Forum Comments
Comment by stu49 posted on K10 Auto ISO !?? at 15/10/2009 - 19:01
No. It is the 500 that has a slave sensor, not the 400T. The 400T is not designed to be used away from the camera. It is a hammerhead gun, with a bracket for the camera to sit on, and a short cable to connect it.
But slave triggers are very cheap. I should go that route.
G
Thanks
All the P-TTL flashes can work in slave mode, provided they are used with other P-TTL flashes and a compatible camera.
Otherwise, only the AF-500FTZ has a built-in slave sensor which can be triggered by any flashgun (or by the camera's built-in flash). It is by far the best, most powerful, and most feature-laden of the non-P-TTL flashes, which is why I have three! It does not, however, have an A-mode.
The most I paid was £70.00, but you will find some people trying to sell them for much more.
The AF-400T is also a good flash, though big, and DOES have an A-mode.
A-mode means the flash has a built-in light meter, and shuts itself off when the right amount of light has been received. The most convenient A-mode flash is the AF-280T.
In fact, the best Pentax flashguns are the 280T, the 400T, the 500FTZ and the 540FGZ.
I use the little 240Z as a trigger.
G
I was going to use a 280T (or 240Z) as trigger on my K10, with a pair of 200S' set either side of the object I'm photographing.
I didn't want to buy photo/RF sensors as more expense and take an age to arrive from China ! (anyone in the uk do them ? cheap !!)
The 400T seems to be the only non p-ttl flash with slave (as u say), but still not cheap. How about non Pentax units, CHEAP on ebay ??
Comment by stu49 posted on Jessops 360AFD? at 14/10/2009 - 19:48
He means the other guns are P-TTL. The GX-10 won't like the Jessops.
The Jessops is TTL only and the GX10 doesn't support that, only P-TTL.
There's still some uncertainty over the Jessops 360afd, as to whether it is p-ttl or not ! some say yes, some say no !
just wanted to check before I buy and get disappointed. Think I may stick to Pentax flash
Comment by stu49 posted on Jessops 360AFD? at 14/10/2009 - 15:27
but they are all P-TTL so the GX10 won't like it
Comment by stu49 posted on Jessops 360AFD? at 14/10/2009 - 14:48
its good for me as I have a *istD that supports ttl. The guy in jessops was saying that it was fully comparable with the newer pentax dslr's as it was a digital flashgun. If I were you I'd pop along to a jessops store and take your camera with you so you could try it. That way you'll get a definant answer if it'll work or not. It controls the exposure on my camera even telling me on the flash lcd panel what aperture its using.
As thinking of buying one !
Comment by stu49 posted on Jessops 360AFD? at 14/10/2009 - 14:17
Just use a lens hood and then cap when the lens is not in use?
The guy said "Why pay good money for lenses and then stick another piece of glass in front?", and "as for protection, that's what the cap's for"
I thought it was good advice and just use a CPL now
I can understand the case with lots of sand blowing about though !
You don't want your lenses sand-blasted
Comment by stu49 posted on 77mm filters at 12/10/2009 - 13:59
Comment by stu49 posted on K10 options !? at 11/10/2009 - 23:53

