jeallen01

Joined: 12th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

jeallen01
Bought my first Praktika (FX2 and note the earlier spelling) around 1962 and that had the M42 fitting, as did the IVB that I got later on - and then there was the very 2nd hand Ediixa Prismat that I got in 1969, and still have in the cupboard. After I fixed that (lever-wind gear problem - no spares available by then in around 1978, but I got around the problem, and it was totally reliable, albeit totally disreputably looking, ever after, and it has the most "delightfully sweet" engineered wind-mechanism.

BTW to Algi, on my budgets through the years, the many Practicas I had were always very reliable, if, I grant you, rather "agricultural" (but nowhere near as bad as the Zenits/Zeniths!) by comparison with the Pentaxes of those times - which I could never afford.

Comment by jeallen01 posted on Using Old Pentax Lenses on Newer Pentax Cameras at 15/06/2017 - 15:03

jeallen01
"K-2" was a typo as it should have been "K-3"! And you have confirmed my understanding that the BG-5 won't fit the K-1.

Comment by jeallen01 posted on Pentax K1 Battery Grip at 13/06/2017 - 20:02

jeallen01
bforbes wrote:
...but when the K1 arrived it came with a grip which I exchanged for a K3 grip. I ....
Interesting - does that mean that a BG5 grip for a K-2 will fit the K-1?
(if it does then that would almost answer Sebas original question as there are many BG5 clones already on the market!)

OR: Did you mean you swapped the K-1 grip for another grip to fit onto a K-3 body?

BTW: if it does fit, then are there any downsides (things not working as they should, incorrect button actions , etc.)?

Comment by jeallen01 posted on Pentax K1 Battery Grip at 13/06/2017 - 18:02

jeallen01
This is all about "whatever works for you/me":
- "my solution" works for me because the balance is reasonable, I can rotate the focus rings whilst supporting the lenses, and I can swop quickly between camera/lens combos
- Barrie's solution doesn't work for me because the balance feels "wrong" to me
- Algi's solution doesn't work for me because I need to be able to quickly swop between 2x camera/lens combos, and I would just get "tangled up" by tripod legs (and I have also tried pistol grips and "gun mounts" under the battery grips - but they don't really work either)

Comment by jeallen01 posted on Pentax K1 Battery Grip at 13/06/2017 - 10:01

jeallen01
I added relatively long Arca-compatible tripod bars under the handgrips of both the 100-300 F4 + 1.4x TC (on the K-3) and 150-500 (on the K-5 - so far) lenses, and they allow me to position the palm of my left hand under the bars to support the combos so that I can still rotate the zoom and focusing rings on both lenses (albeit that the extremely long rotational movement of the latter lens is a problem in any circumstances) - this is for handheld shooting at airshows and the like, and the only real problem is that my back can't take the overall weights of the combos for too long and so I have to sit down quite often.

OTOH, just adding extra mass at the body end of a combo does nothing to help you rotate those rings

Comment by jeallen01 posted on Pentax K1 Battery Grip at 12/06/2017 - 22:44

jeallen01
bforbes wrote:
I've had another think, and I think I was correct the first time. The CoG is the point through which the weight of a body acts. So as jeallen01 said if the weight is at the front of a lens the CoG will be towards the front. By adding weight to the back of the lens/camera you move the CoG towards the back and improve the balance.
Moving the "pivot point" (the point at which the body/lens combo is supported) forwards without adding extra overall weight (or at least not as much as adding a heavy grip & battery) achieves the same overall result.

Comment by jeallen01 posted on Pentax K1 Battery Grip at 12/06/2017 - 22:17

jeallen01
Barrie

I agree with your last comment about the battery.

Comment by jeallen01 posted on Pentax K1 Battery Grip at 12/06/2017 - 21:04

jeallen01
[quote:] In order to obtain a better balance with long/heavy lenses I would suggest you need to shift the center of gravity towards the camera, which the weight of a grip and extra battery does. Leaving a battery out would not be as effective[/quote]I think you have it the wrong way round - shifting the CoG towards the body will only make things worse!

You need to shift it the other way because the large and heavy lens elements are at the hood end, until the mass is evenly distributed either side of it. That's why a lens collar with a handle on the bottom should work (and does with the collar and handle on both the 100-F4 & 150-500 Sigmas.

PS: If the handle on the grip does not adequately move it far enough forwards then fit a long Arca clamp compatible bar on the bottom of that and put some neoprene tubing around it (that's what I did, and it worked).

Comment by jeallen01 posted on Pentax K1 Battery Grip at 12/06/2017 - 20:33

jeallen01
Could that likely be the embedded EXIF camera info rather than the actual DNG file format - and that the s/w has not been updated to recognise the latter two bodies?

Comment by jeallen01 posted on FYI - Corel Aftershot 3 Free Download at 12/06/2017 - 15:42

jeallen01
Sebas

Some people have found that grips for other brands can be made to "more or less" fit Pentax models - IIRC, some Nikon grips were found to "more or less" fit the K-30 (which was never designed to take a grip - but it can be done - info on the US forum). So don't be afraid to look further afield than just the Pentax BG grips.

OTOH, you will probably find that the buttons on those won't work on a Pentax

Comment by jeallen01 posted on Pentax K1 Battery Grip at 12/06/2017 - 08:20

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo