jeallen01

Joined: 12th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

jeallen01
PS: did anyone mention that you need to do the tests with the camera on a sturdy tripod with a head that can be firmly locked in place - otherwise you will never keep the single AF point on the target!

And, Yes, John R is right - it takes quite a long time, especially if you are testing several lenses/bodies = keep a morning or afternoon free and don't hurry!

Comment by jeallen01 posted on Focusing issues on Pentax cameras at 26/07/2017 - 10:07

jeallen01
richandfleur wrote:

What's the vibe on distance to the subject? Do the results work better if it's up close than further away etc?

And What's the consensus around zoom lenses? If you have a 55-300, where does one look across the focal range to undertake this test?
IMHO:
- the test distance should reflect, as far as possible, those at which you generally use the lenses - and, of course, the min test distance will likely vary according to the actual min focus distances of the various lenses.
- re the zoom lenses, not so sure about that, but probably you should do tests at the min, mid-point, and max zoom settings, and see what you find, and then decide where to optimise the adjustment for each lens according to how you are likely to use it.

If you have several bodies, then it may help to repeat the tests with each one to see if a pattern develops, as that could help to identify if any issues are lens or body specific.

BTW: there is a lot of info in various threads on the US forum - which is how I worked out how best to do it myself.

Comment by jeallen01 posted on Focusing issues on Pentax cameras at 26/07/2017 - 08:30

jeallen01
FWIW, you don't need to buy any special kit to do the adjustment - just get a 1m aluminium rule from your local DIY place, put a piece of masking tape on it to indicate the 50cm point, and set it at around 45 degs to the vertical at a suitable distance (will depend on the lens in question - I used a 10-15m distance for my long lenses) from the camera/lens.

Focus manually on the 50cm mark using Live View, and then use the AF mode when you press the shutter button (or, better, use an IR remote) - if the AF adjustment is correct, the resulting image will show the same focus point to be sharp. Otherwise the camera will have focused the lens in front of , or behind, the 50cm mark and then you know how to dial in the adjustment.

OTOH, if you get several lenses which all want the same nearly +/- 10 adjustments then suspect that the camera body itself needs recalibration.

Simples, when you get used to it (and I must do that with the 17-70 Sigma I just got from another forum member!).

Comment by jeallen01 posted on Focusing issues on Pentax cameras at 25/07/2017 - 22:53

jeallen01
The tests I did a couple of years ago with the K-3/K-5/K-30 showed that several Sigma lenses had back/front focus issues with some of them - and that, in the end, that the K-3 was itself not correctly calibrated and had to be serviced by Johnsons (but that's another rather less-than-satisfactory story!).

Comment by jeallen01 posted on Focusing issues on Pentax cameras at 25/07/2017 - 22:03

jeallen01
FWIW I have found that this lens is best left in MF mode with the body on AF - and then the lens can be used in what Pentax call "quickshift" mode, whereas if you put it in AF mode then you can't override the chosen focus distance.

Comment by jeallen01 posted on For Sale : Sigma 100-300mm f4 DG EX at 24/07/2017 - 19:46

jeallen01
One of my "go to" lenses - sort of worried that Mike will finally be "moving on" from "us"!

Comment by jeallen01 posted on For Sale : Sigma 100-300mm f4 DG EX at 21/07/2017 - 22:22

jeallen01
In my experience, unfortunately, their performance in simply servicing my K-3 to fix an autofocus issue a couple of years ago was not "impressive" - had to email them several times to get some "action", and then, when they finally returned the body (fixed, it has to be said), they failed to return the USB flash drive that I sent in with the body to illustrate the issues - had to email them about that before I got it back (value was very low, but "it's the thought that counts").

Comment by jeallen01 posted on Johnsons Photopia Ltd at 18/07/2017 - 22:42

jeallen01
Luckily mine's still OK (for now!) after 3+ years - maybe I'm "gentler" when I remove the battery!

Comment by jeallen01 posted on K30 battery retaining clip at 17/07/2017 - 22:06

jeallen01
Algernon wrote:
OK although Dixons had a monopoly on Chinon
--
Yes, but only in the UK - as outlined on Wikipedia.

And I kept my CS-4 & motor drive when I sold my MZ-5N as that still gave me a PK-mount film body to use - not that I have - (and the 2nd hand value was/is zilch)

Comment by jeallen01 posted on Upcoming Amazon Prime Pentax deals at 17/07/2017 - 13:02

jeallen01
Algi

"One all then", or maybe Two-One to me if you include Prinzflex!

Comment by jeallen01 posted on Upcoming Amazon Prime Pentax deals at 17/07/2017 - 12:46

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo