All Forum Comments
Comment by George Lazarette posted on Focusing screens for K10D at 16/09/2007 - 09:50
All Nikon cameras since the 1950's have had what Nikon call the 'F' Mount. It is the standard to which Nikon produced every single Lens it ever made....so all Nikon lens fit all Nikon Cameras with the exception of the likes of the D40. ................
See this from Wikipedia:
"Incompatibilities do exist, however, and adventurous F-mount users should consult product documentation in order to avoid problems. In particular, many electronic camera bodies cannot meter without a "CPU" enabled lens, the aperture of G designated lenses cannot be controlled without an electronic camera body, and non-AI lenses manufactured prior to 1977 can cause mechanical damage to later model bodies unless they are modified to the AI specification."
Compare with Pentax:
All Pentax DSLRs will work with all Pentax bayonet lenses. Metering is a separate step with the oldest lenses, and has to be done wide-open when these lenses are used on a K10D.
G
Comment by George Lazarette posted on Focusing screens for K10D at 15/09/2007 - 12:53
What im told is nikkon havnt changed their mount and they are still using the f mount apart from nikkon D40 where you might run into trouble using the old lenses. This is what i know but ill do some more research and get back to you.
Thats good news about the k mount for pentax as i was starting to lean the other way again and was thinking nikkon/cannon but it would be a shame as i have a heap of nice old pentax gear. i was down the shop yesterday looking at some k10d but i couldnt get over how huge they were but still felt nice but the size alone might make me drop down to a k100d.
Nonetheless, Nikon lens compatibility is much superior to Canon.
If you are addicted to using old lenses, there is no reason not to buy a K10D if it suits you in other ways. You'll just have to work around the metering problem. One way is to meter wide open, and then calculate the necessary adjustments in your head.
It's very easy. If the meter tells you to use 1/1000 sec at f4, and you want to use f8, then you reduce the aperture by two stops to get f8, and increase the shutter interval by two stops to compensate - which brings you to 1/250 sec.
That's all there is to it.
G
Comment by George Lazarette posted on Focusing screens for K10D at 15/09/2007 - 12:39
the old nikkon lenses fit the new nikkon they havnt change there mount
"The original F-mount appeared in 1959, and lenses that were produced from then until about 1979 are usually referred to as Pre-AI. These lenses are dangerous on current Nikon bodies. With the exception of a modified F5 and the D40/D40x, mounting one of these lenses on your new Nikon will result in damage, so don't even try it. "
http://www.bythom.com/lensacronyms.htm
G
Comment by George Lazarette posted on Focusing screens for K10D at 15/09/2007 - 11:05
I new I shouldn't have trade my Hexar RF for a Pentax and sold all my Nikon gear....
I knew it, I wanted to try but all I have encountered is disappointement.
Decent lenses are way too expensive and rare.
ANd now the focusing screens issue...
Frankly I don't see how they can survive!
Here's my advice:
Part 1
Sell the K10D, and all your lenses.
Buy a shedload of Canon lenses from 1975.
Buy a modern Canon camera.
Try and fit the lenses.
Check the prices of modern Canon lenses with shake reduction.
Post to a Canon newsgroup saying how disappointed you are.
Part 2
Sell the Canon, and all your lenses.
Buy a shedload of Nikon lenses from 1975.
Buy a modern Nikon camera.
Try and fit the lenses.
Check the prices of modern Nikon lenses with shake reduction.
Post to a Nikon newsgroup saying how disappointed you are.
Part 3
Sell the Nikon, and all your lenses.
Buy a shedload of Pentax lenses from 1975.
Buy a Pentax K100D camera.
Try and fit the lenses.
Post to this newsgroup saying how happy you are.
Part 4
Sell the K100D, but keep all your lenses.
Buy a Pentax K10D, plus a Katz screen for fifty bucks
Wonder why you didn't do this in the first place.
Moral: Do your research and be realistic.
G
Comment by George Lazarette posted on Focusing screens for K10D at 15/09/2007 - 10:48
Owls can be very wise.
We were at an owl sanctuary near Penrith and brother-in-law Mark saw a snowy owl that was quite delightful. "It's a pity it's against that white wall," he said.
The owl looked up, trundled away from the white wall, stood in front of some foliage and posed. Amazing.
But I hadn't realised quite how much these birds can learn. This owl needs an agent.
G
Comment by George Lazarette posted on K10D and FA50mm 1.4 at 11/09/2007 - 20:52
Sorry George did'nt mean too cut your grass
Cheers
G
Comment by George Lazarette posted on K100D or K100D Super at 09/09/2007 - 15:45
Did I miss something!!
You were asking about what looks at first glance to be a purely web-based operation, and a box-shifter to boot.
With things that might go wrong, and be difficult to fix, I prefer to buy from a shop where I can go in and speak directly to the manager.
G
Comment by George Lazarette posted on K100D or K100D Super at 09/09/2007 - 15:18
Thank you gentlemen for your advice, it looks like I will buying the the K100D Super.
Anyone had any dealings with photoextra? looks a good deal! http://www.ekmpowershop6.com/ekmps/shops/photoextra/index.asp
G
Comment by George Lazarette posted on K100D or K100D Super at 09/09/2007 - 13:53
The DA* smc 50-135mm is quite expensive (about £600) so I can't see me buying one of those for a long time. So is the dust removal worth the extra £60?
G
Comment by George Lazarette posted on K100D or K100D Super at 09/09/2007 - 11:41


And for the record, all AIS lenses do fit on DSLR nikon bodies.
G