Frogherder

Joined: 19th February 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Frogherder
ChrisA wrote:
It's like that on mine too. IMO the slidey card door and the ease of getting the cards in and out is a real design weakness of the K-5 compared with the 10/20.

Shame, since more or less everything else is so much better.
I'll second that. With fingers like popeye I struggle to the degree I now carry a set of plastic tweezers in my bag


Bernard

Comment by Frogherder posted on K5 SD Card ejection stiff? at 28/02/2012 - 00:42

Frogherder
They do say you can train a chimpanzee to operate a capstan lathe. What you can't do is get it to spend a lifetime doing it.

Whose the smarter?

In my first job I spent 5 years staring at polished samples of bronze under a microsope, which I then photographed with a 1/4 plate (glass) camera mounted on the top. After I'd processed the plates and produced B&W prints I delivered them to the metallurgist then went back and did another load.
I never did figure out what he saw in them.


regards
Bernard

Comment by Frogherder posted on Most boring job at 28/02/2012 - 00:25

Frogherder
Eventually our Hippeaseastrum has flowered, not quite the flaming red colour on the box but very welome.
Planted immediately after Christmas it didn't do anything for ages then it threw up 2 flower stalks, now between 32 and 37 inches above the pot. It didn't appear to want to stop growing.

[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP0288.jpg[/IMG]

Shot in an east facing sunny window with fill in flash to remove the dark window frame shadow.
Comments/Critique please

regards
Bernard

Comment by Frogherder posted on Ours isn't yellow either at 28/02/2012 - 00:17

Frogherder
Quote:
Graphics cards are only used by 3d applications and the very expensive Photoshop CS5. No other image editing requires any type of graphic card other than the bog standard ones with a monitor in interface. They card would be a waste of money unless you do CAD or PC gaming
I do/have done a lot of CAD work, admittedly 2D CAD and never felt the need for anything other than the card which came with the PC.

I would temper that by adding that none of my drawings have been more than 20 layers or anything like as complex as a "motor car", so I may have got away with it

regards
Bernard

Comment by Frogherder posted on I'm beginning to take this photography lark seriously. at 27/02/2012 - 18:19

Frogherder
Chalk up another for #1, but it's a very close call

By the way did you get your feet wet?
What exposure did you use?

Bernard

Comment by Frogherder posted on Two different versions from Aldeburgh at 26/02/2012 - 23:55

Frogherder
I've no idea why but when mixing extension tubes and x2 converters I found that :-

Camera - x2 - tube - lens gave a different distance from camera to subject than
Camera - tube - x2 - lens

I've not been able to rationalise the maths though


Incidentally in my previous comment I forgot to mention that rather than setting the focus on infinity you focus on a closer object you are effectively introducing an imaginary tube


regards
Bernard

Comment by Frogherder posted on Macro on the cheap (and suggestions for focus rail, please) at 26/02/2012 - 23:17

Frogherder

Comment by Frogherder posted on Another pointless thread at 26/02/2012 - 23:04

Frogherder
Basically the calculations (based on simple lens theory) are :-

1/U + 1/V = 1/F

M = U/V

where
F = focal length of lens
U = combined distance of extension + focal length (assuming lens is focused on infinity)
V = object distance

so for a 50mm lens focused on infinity the inmage distance = 50mm
the same lens + 50mm extension would focus on 100mm and have a magnification of 1

a 135mm lens + 50mm extension would focus on an object 499.5mm away and have a magnification of 0.27.

If you do the maths yourself to calculate the tube length for 1:1 you should find a length of 135mm

regards
Bernard

Comment by Frogherder posted on Macro on the cheap (and suggestions for focus rail, please) at 26/02/2012 - 22:57

Frogherder
Quote:
Back to pointlessness please
Politics is pointless

It usually doesn't solve anything, they all rely on talk, talk, talk, rather than do, do, do.

They expect someone else to clear up the mess and then take credit for it.


Bernard

Comment by Frogherder posted on Another pointless thread at 26/02/2012 - 18:39

Frogherder
How about Tom Lehrer

http://www.youtube.com/watch?v=yhuMLpdnOjY

Bernard

Comment by Frogherder posted on Another pointless thread at 24/02/2012 - 20:35

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo