All Forum Comments
Comment by Daronl posted on K1 and the Sigma Lens interference ("scratch") at 15/05/2016 - 23:22
But it is still a very interesting and difficult subject to capture and get good dof and sharpness on, so it is still a very skillful well executed shot
Comment by Daronl posted on Zebra Spider at 15/05/2016 - 23:02
This is a great little lens for any Pentax. It's small, sharp, fast, light and tough.
It offers essentially perfect optical performance and is the world's smallest and lightest 100mm macro lens.
Comment by Daronl posted on Practical Pornography have tested a Pentax Lens!!1 at 14/05/2016 - 09:19
https://www.ephotozine.com/article/pentax-d-fa-100mm-f-2-8-macro-wr-lens-review-...#Verdict
Time for an comprensive boycott, It is singularly the most "impotent" and uninformative rag out there; with few exceptions none of them are of much use and nine of them are worth £5 for sure.
Practical Photography is only a very biased and glorified sales publication Offering nothing to for the hobbyist, enthusisat or pro photographer.
Also noticed that Pentax didn't pick up a single award in the Photography News Award and there were many catagories ( the boss, a well known Mr Ch.... is unnofficial and self proclaimed "Head of Canon marketing ")..
Should "Practical Photography" be renamed : "Impractical photograpy"
On second thoughts maybe Peter's choice "Practical Pornography" does it full justice.
Comment by Daronl posted on Practical Pornography have tested a Pentax Lens!!1 at 14/05/2016 - 07:53
Comment by Daronl posted on Together We Are Beautiful at 11/05/2016 - 13:21
Thanks for your comments; always really appreciated and I will send some picture of the new gear soon
Best Regards
Lets see some pictures of your new gear soon please .... jealous already !
Comment by Daronl posted on First shots with K1 and 15-30 ( unplanned in challenging light) whist waiting for the wife at 03/05/2016 - 20:40
Got a day on the birds next week with my 150-450 so I can't wait to do that with the K1 .
As regards the 15-30, despite having read about the front element I was quite surprised how " domed" it is but the distortion correction on the K1 really does what it claims.
So I hope to try it out in better conditions on the week end because it does look to be very sharp.
Regards
Comment by Daronl posted on First shots with K1 and 15-30 ( unplanned in challenging light) whist waiting for the wife at 03/05/2016 - 15:10
The light was a little challenging to say the least but I thought that might give me the opportunity to test it on Hi ISO, hand holding at slow shutter speeds ( some with very tight depth of field ); certainly not ideal conditions or subjects but take a look below.
1. Dolly the car

2. Door Knockers ( again)

3.Later - massive crop of cat

4. The boss (no flash single 6 watt led illumination)

5. Nice Detail

6. Black and white knocker ( maybe better?)

Comment by Daronl posted on First shots with K1 and 15-30 ( unplanned in challenging light) whist waiting for the wife at 03/05/2016 - 12:17
Jh
http://www.mymemory.co.uk/SDXC/Lexar/Lexar-64GB-Lexar-Professional-1000x-SD-%28SDXC%29-Card-UHS-II-U3---150MB_sb
Comment by Daronl posted on Memory cards at 28/04/2016 - 07:33
Well done
Comment by Daronl posted on Just One Red at 27/04/2016 - 18:08


On my gear the clearance ( gap) can only be seen if a very bright light is placed behind the potential "touchpoint"
However I do believe that if one does not take care mounting and removing the lens it could close the gap and create contact.
Surely very carefully taking the sharp corner off the lens mount ring at the 12' clock position with a fine emery board (like our ladies use for their nails) eliminates the problem.
It needs literally, just a very minute removal of the sharpness on the corner, which needs to be hardly visible followed by a good " puffing" after; should take less than a few seconds to create a minute airgap between the edge ( corner) of the lens mounting ring and the K 1 body.
Obviously the rear of the lens needs protection to prevent any fine debris getting in the mount or on the rear glass.
Check with backlight after to ensure you have created a very small airgap that allows the backlight through and if so the problem is solved.
Better than sending it back to Sigma for a week (or two, or three) to have that ring changed (or modified ) for a " micro chamfered one". which is likely the repair they will offer
As I said above, I had no need on my Sigmas as there is no contact ; both of the lenses were on the list not to be used before a mod is carried out.
Any views