Rodger Fooks

Joined: 1st January 2007

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Rodger Fooks
Quite right Matt - the reason I turn the lights off is that for final colour balance I always turn off the lights. Rest of the tweeking I use a 40W daylight bulb

Comment by Rodger Fooks posted on Spyder 2 Express help at 25/07/2007 - 14:12

Rodger Fooks
Make sure the monitor has been on for at least 1 hour and that the monitors on-screen display (and the mose pointer) are well outside of the calibration area.

Then try running the software again and make sure you adjust the contrast and brightness EXACTLY as it says. (Tricky with express but easy in Pro)

If your monitor has RGB sliders make sure you adjust the setting to get a variance of <.5 normally 0.15 should be possible. Note - If the RGB was originally a long way out then bringing them in to line will affect the Brightness and contrast. Once they are about right click the back button and re-adjust brightness / contrast then carry on as normal.

Alos make sure you have the curtains drawn and the lights off and that the 3 points of the spyder are all touching the screen. On mine I have to tilt the screen back a little so that it rests flat.

I used to use Express and would have to run the calibration 3 times before no changes were necessary. With pro on pass is all it needs.

PS - With MS Windows If you use Photoshop make sure Adobe Gamma is not in the Start - Programs - startup list ! If it is remove it ane re-start windows before running Spyder software.

Comment by Rodger Fooks posted on Spyder 2 Express help at 25/07/2007 - 13:58

Rodger Fooks
Are you sure you're not in Raw+ :

I use a Kingston 2Gb *** image quality, and 10Mb
The camera estimates
121 in Raw
93 RAW+
410 jpeg

Comment by Rodger Fooks posted on number of photos on a 2 gig card at 27/07/2007 - 09:40

Rodger Fooks
Comment Image

Comment by Rodger Fooks posted on Pentax UK looking for photos at 25/07/2007 - 09:12

Rodger Fooks
I've sent several e-mails all labelled not spam to Pentax with no response. Each time requesting the same info - Whta happened to the e-naws letters subscribers ar supposed to receive?

The only way I find out about whats happening, software, firmware updates etc is via this great forum

Comment by Rodger Fooks posted on pentax user subscription at 25/07/2007 - 12:38

Rodger Fooks
Quote:
Rodger, do you mean 10-20 Pentax or Sigma? Wasn't aware of a 10-20 Pentax.
Dan
its the Pentax DA 10-17ED IF Fish Eye - Sorry for the typo

Comment by Rodger Fooks posted on Lens' for landscape at 25/07/2007 - 12:43

Rodger Fooks
I use the 10-20 mm Pentax quite a lot - It's very good if you're taking pictures of buildings and there are lots of obstructions or people milling about. You can still get the shot you need by standing much closer than they are.

Watch out though there is a fair amount of CA at 10-12mm

This shot (not the best in the world) was taken at 13mm with a taxi and about 50 people behind me. I would never have got it without the 10-20mm.
Shot is as taken
Comment Image

Comment by Rodger Fooks posted on Lens' for landscape at 25/07/2007 - 09:22

Rodger Fooks
So what's this weeks challenge then Daniel?

Waiting with camera poised

Comment by Rodger Fooks posted on Weekly Competition #4 - "Flight" at 30/07/2007 - 10:43

Rodger Fooks
If you're looking at colour laser most companies make a network version for about £150-£200 more than the non network version.

As a network print server is about £60-£100 you're better off buying the normal version of the printer and adding a "compatable" print server to it. Or just share the printer from a machine that is on all the time like (as you suggest) a NAS

Brother will be bringing out the DCP-560CN in august for about £100 network ready and the DCP-770CW (wireless network) for about £150
Or HP Business Inkjet 1200dtwn Printer at about £300

Comment by Rodger Fooks posted on Network Printers at 23/07/2007 - 15:09

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo