Rodger Fooks

Joined: 1st January 2007

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Rodger Fooks
Hi Damfino and welcome to the forum

Quote:
how do you get the image you wish to take to appear on the lcd screen, without always having to peep through the viewfinder all the time?
Unfortunatel you can't, once you've taken the shot you can prievew it no problem but not until then. IMHO When you get used to it looking through the viewfinder is by far the best way to assess whet you are taking a picture of. The nearest you get otherwise is by pulling the main on/off switch to the right to give a digital prievew. ( provided you've set digital (not optical "default" prievew in the custom menu)

Comment by Rodger Fooks posted on Just arrived this morning at 30/07/2007 - 15:19

Rodger Fooks
Thanks Don
I'll give Lave's a shot

Comment by Rodger Fooks posted on Shutter and lens noise ?? at 30/07/2007 - 14:55

Rodger Fooks
I always use a single fire of the flash to allign two camera inputs but the clicks are a real annoyance as I have to remove them with Audition.

With often 50 - 100 shutter clicks in a 20 min video its a real pain in the A&*e

Has anybody ever tried building a home made buffer for the mirror?

Comment by Rodger Fooks posted on Shutter and lens noise ?? at 30/07/2007 - 12:35

Rodger Fooks
I bought a ME Super many years ago and that had a very quiet mirror mechanism.

Makes me wonder why if they could make one that quiet so long ago why can't they do it now?

In saying that I do a lot of wildlife photography and only once have I found the shutter distracted the wildlife. But Pete's right in churches, musems (where photography is allowed) the noise of the mirror is distracting

My real problem with it is that my wife takes video at the same time, when I edit the movie at home all I can hear is click, click, click AHHH!

Comment by Rodger Fooks posted on Shutter and lens noise ?? at 30/07/2007 - 10:09

Rodger Fooks
Silkypix knocks spots of photolab - keep trying to down load it but remember all the functionality isn't there in the free version.

CS3 also has very good handling of raw files but not up to Silkypix standards

Comment by Rodger Fooks posted on Silkypix 3.0 download at 27/07/2007 - 16:14

Rodger Fooks
I get really good sharp results from the Sigma 135-400.
Whilst heavy it is very fast and lets in good amounts of light.

If you're using DSLR it becomes about 200-600mm equiv.

Haven't tried the others mentioned but whilst the Bigma looks good I question if it can be hand held for any lenght of time

Comment by Rodger Fooks posted on Sigma 170-500 vs pentax 80-320 vs sigma 135-400 at 27/07/2007 - 10:37

Rodger Fooks
If the SATA has the main OS on it then re-configuring the IDE drives won't help unless you are copying files between them.

Thought comes to mind:

Check that the windows paging file is only applied to the SATA drive and not to the IDE drives
Right click my computer
Properties
Advanced
Performance
Settings
Advanced
Virtual memory
Change
Click on each disk in turn and check that no paging file is selected on the IDE drives and that system managed size is set for the SATA drive.

You might also want to check that all drives are healthy
Start - control panel- administrative tools - computer management - disk management
The list will tell you were page files are set, which is the system drive etc...

Also try Ctrl+Alt+del (with no progs running) and see what the CPU and page files are doing. CPU should be <5% and page file <250Mb

Comment by Rodger Fooks posted on WinXP image folder problem at 08/08/2007 - 08:57

Rodger Fooks
Couple of other points which may help with performance

1. Have you installed SP2 plus on-line updates
2. Have you installed all the motherboard drivers (especially the Bus and USB ones)
3. If the second drive is EIDE its best to have it on a different channel (cable) to the main OS drive


Its also worth checking that all the drivers have installed properly go
start - control panel - computer management - device manager
and check that there are no red crosses or yellow exclamation marks against any devices.

Comment by Rodger Fooks posted on WinXP image folder problem at 27/07/2007 - 08:31

Rodger Fooks
Quote:

whats is the forte manager? the inbuilt settings control panel? how would I run that to achieve an improvement?.
Forte Manager is the same as having buttons on the screen to control brightness, contrast, RGB settings etc... just that it does it through loading software on the PC, once you've changed the settings in the normal way it uploads them to the monitor and allows you to save them as a profile within the monitor and not the PC.

Unless yours is an older type with buttons to control these settings on the screen itself this is possibly the part you are missing

I know when I got mine it was miles out on factory defaults

Comment by Rodger Fooks posted on Spyder 2 Express help at 26/07/2007 - 08:12

Rodger Fooks
Ah the LG2000C - Wonderful monitor but you must run the Forte Manager to control it!

The main issue is that when you make changes to the monitor it takes a while to change (at least 3 seconds)

I'm not sure what Spyder Express offers as I haven't used it for so long but on mine the measured readings are

White point 5800K
Gamma 2.2
Black Luminance .53
White Luminance 125

As express probably doesn't measure external surroundings try adjusting to the above settings in express and see what happens?

Comment by Rodger Fooks posted on Spyder 2 Express help at 25/07/2007 - 16:17

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo