RichardDay

Joined: 19th May 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

RichardDay
Thanks guys.

I shall try both and see how they compare and let you know.

Comment by RichardDay posted on Has anyone used DSCL (Fujifilm) on-line printing at 07/10/2009 - 18:23

RichardDay
Bump - No one tried them?

Oh well, I will give them a go with a couple of test shots and see how they fare.

Comment by RichardDay posted on Has anyone used DSCL (Fujifilm) on-line printing at 07/10/2009 - 17:20

RichardDay
For a "budget" high quality lens think about the DA 16-45, it's a great lens and although I recently upgraded to the DA 17-70, it's only "slightly" better.

For wide FOV landscape shots I prefer to use a longer lens and use a stitching program to make a panoramic as the front to back perspective is more realistic, with a very wide angle lens the distance from near to far is more exaggerated.

Here is an example, the first was taken with the Sigma 10-20 and cropped top and bottom to match the stitched shot taken with the DA 16-45 at 24mm and with three frames. You will notice that the hills in the background seem much further away and the far shore line appears to recede more in the 10mm shot. Both shots were taken on a tripod from the same position within a minute or so from each other.

10mm shot

Comment Image


Stitched shot

Comment Image

Comment by RichardDay posted on Next lens advice.. at 07/10/2009 - 17:16

RichardDay
Just checked my Sigma results in PhotoME

Sigma 18-50 DC reports as Sigma 18-50DC, 12-24 EX, 17-70 f2.8-4.0 or Tamron 35-90 f4.0
Sigma 55-200 DC reports as Sigma 55-200 DC, Pentax SMC-F 35-105 or a Sigma 28-300
Sigma 100-300 EX reports as Sigma 70-200 EX or 100-300 EX
Sigma 10-20 DG reports as Sigma 10-20 DG or 12-24 EX

Similar results in IDimager.

SilkyPix Pro reports the following:

Sigma 10-20 DG as a Sigma 18-50 DC
Sigma 18-50 DC reports correctly
Sigma 55-200 DC as a Pentax F 35-105
Sigma 100-300 EX as a 70-200 EX

Sigma are not alone, my Tokina 80-400 ATX II reported as a Sigma 70-200 EX and my Tokina 80-200 f2.8 ATXPro as a Pentax 35-105 or a Sigma 70-200 EX and my Tokina 20-35 f3.5-4.5 as a Pentax F 35-70

The few Tamron lenses I've had seem to be okay, as do sample shots from some Canon and Nikon lenses.

It seems probable that the main makers lenses report correctly, but there are some considerable discrepancies with some Sigmas and also some of the earlier Tokinas. There is also some variation between PhotoME, IDI and SilkyPix, but at least they do, in general, agree on one or two of the multiple choices.

Looks like a lottery to me unless you stick with the camera makers lenses.

EDIT - All the software versions are up to date.

Comment by RichardDay posted on Silkypix exif data question. at 07/10/2009 - 14:14

RichardDay
Oggy wrote:
RichardDay wrote:
Sigma use the same code for several of their lenses, I think it's because they just copy stuff rather than licence it, some of their lenses report as Pentax lenses.

I'm biased (:wink as I'm not a Sigma fan since owning several of their lenses and being dissatisfied with all of them.
Do we know this for a fact Richard?

It is frequently said that the problem with last year's version of Photome not recognising the Sigma 150-500 or incorrectly reporting it as a 70-210 or whatever was a Sigma problem.

On updating Photome, the lens is reported correctly, even on old photographs, so the problem was with Photome's lens name lookup table and not the lens.
It's what's been said by many others so I tended to believe it, but you may well be correct.

I will need to check this out on my old Sigma shots. I will have to fire up my archive drive, so will take me a short while to report back.

Comment by RichardDay posted on Silkypix exif data question. at 07/10/2009 - 12:56

RichardDay
Many people thought the K20D was a minor step up from the K10D.

But boy, are they wrong!

As far as IQ is concerned it was a much bigger step than the K20D to a K-7. In addition to the big IQ leap, (more resolution, better DR, improved high ISO noise and better colour) the ability to get spot on AF adjustment for each lens, was alone worth the step.

For me, on an out of 10 score, the K20D and K-7 both get a 9/10 (for different reasons), but the K10D in comparison is a struggling 7/10.

Comment by RichardDay posted on just upgraded to a K20D at 07/10/2009 - 12:51

RichardDay
Daronl wrote:
Getting my 50-153 DA* repaired in the US

Re Contacting Pentax USA - John Carlson as per recomendation from Mr Day

Customer Service (if calling within the U.S.)
Phone: 1-800-877-0155
Monday – Friday
7:30 a.m. – 4:30 p.m., Mountain Standard Time

Using their internal Phone service means only voicmail no human communication so far despite numerous calls and voice mails.

But i'll keep on trying

Regards

DaronL
Try the old fashioned way - Write a letter and post by snail-mail!

Comment by RichardDay posted on SDM issues? A straw poll. at 07/10/2009 - 12:39

RichardDay
bladerunneruk wrote:
Anyone manage to get silkypix to recognise Sv mode ?
I get ExpProgram = unknown
Neither TAv or Sv are recognised, both are reported as unknown. I will report this with sample files to Silkypix UK for feedback to ISL.

Whether they do anything about it is anyones guess!

IDimager and PhotoME are the same. IDI says Unidentified and PhotoME says undefined.

Comment by RichardDay posted on Silkypix exif data question. at 07/10/2009 - 12:14

RichardDay
thoughton wrote:
My, what a lot of quick launch icons you have

Is SilkyPix always accurate about naming the lens? Aperture will get it wrong with some lenses, e.g. my Sigma 10-20 is recorded as a Sigma 18-50.
Sigma use the same code for several of their lenses, I think it's because they just copy stuff rather than licence it, some of their lenses report as Pentax lenses.

I'm biased (:wink as I'm not a Sigma fan since owning several of their lenses and being dissatisfied with all of them.

Comment by RichardDay posted on Silkypix exif data question. at 07/10/2009 - 12:03

RichardDay
I'm interested to see if anyone has used this photo-printing supplier as they seem very attractively priced and on decent quality paper, especially for larger prints, i.e. A3 and 18"x12" for only £1.10 each!!

link

Any input very welcome.

Comment by RichardDay posted on Has anyone used DSCL (Fujifilm) on-line printing at 06/10/2009 - 18:26

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo