richandfleur

Joined: 3rd December 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

richandfleur
Given time lapses will usually be compiled as 1080p video (approx 2MP) I stopped using a DSLR for them. Instead I use a GoPro for most timelapse work nowadays.

No the range of lenses and a smaller sensor etc obviously, but the thousands of clicks on my physical shutter just didn't sit right with me either.

Comment by richandfleur posted on Interval movie frames count as shutter actuations (K-1) at 26/02/2017 - 04:39

richandfleur

Comment by richandfleur posted on Bad News at Nikon? at 26/02/2017 - 04:36

richandfleur
Might be SR II related. Maybe they can get it working satisfactorily with that version.

I'd love to see it back dated to earlier models if possible, but Pentax aren't strong with doing that like others are.

Sounds good for the future though, and will believe it when I see it.

Comment by richandfleur posted on Pentax for Video at 24/02/2017 - 18:40

richandfleur
Exciting

Have a good weekend

Comment by richandfleur posted on Just got my KP at 23/02/2017 - 20:55

richandfleur
Turning it off is an option, in fact it's the only option if you want to avoid warping of your footage. You can then reapply some stabilisation in post production, which at least you get a lot of fine tuning control over, rather than no control via Movie SR. Obviously the more proactive you are at preventing shaking in the first place, the better, so tripods, stabilising mounts etc are all important also.

Reality check time though:
There are very few stabilised lens options for Pentax, as it's rightly assumed that stabilisation will be done in camera.
Nearly all Pentax cameras have real sensor shift stabilisation, dating all the way back to my first Pentax DSLR, the K-100d, released in 2006
This was used for Video stabilisation on the K-x (?) K-7 and K-5 models in 2009
These guys led the field. Now you have to go elsewhere to find sensor stabilisation during video, with Panasonic, Olympus and Sony all successfully making this work.
Since 2012, no Pentax camera has used the real mechanical sensor stabilisation SR system for video. This includes their big ticket items like the K-1 and KP cameras.

Comment by richandfleur posted on Pentax for Video at 23/02/2017 - 19:46

richandfleur
Great set. Think I prefer the all in focus shots, rather than the narrow depth of field ones.

Reminds me of Edvard Munch's Scream paintings.

Comment by richandfleur posted on Big Log at 22/02/2017 - 20:45

richandfleur
JAK wrote:
That's fine, similar to what I got on my K-5. I must say I hadn't realised the extent its got wrecked in the recent models.
Arriving a bit late to this conversation, but Steve's got it covered.
Every Pentax camera since the K-5ii models has had a software attempt at video stabilisation called 'Movie SR' instead of real mechahical sensor stabilisaiton.
The result of this is as you have discovered, utter rubbish. Glad to see users giving that video mode button a go, but sorry to see you've also realised that what they've giving us isn't very good.

Reviews don't know to look for it, so the 'expert' review link doesn't know what it's talking about. The reason the "sensor-based stabilisation behaved slightly oddly for videos, too" was because it's not used at all and the Movie SR offering is rubbish.

What's embarrassing too is that the Movie SR package has been rolled out to every new camera pretty much as is. The K-1 and presumably the KP still have the same video package from 2012, with only minor tweaks since then. (The K-70 is a semi major deviation in terms of video, having some on sensor phase detect AF points, which they use to improve/provide continuous autofocus, but it still uses the same core package in terms of Movie SR and low bit rates/quality etc). So, that's 5 years of just shoving the same flawed content out in every 'new' model.

Every model basically has the same video capabilities, and they're not very good. I've honestly had Movie SR nearly ruin a little project I was working on, where it turned a babies head into a warping conehead, and completely randomly/in a non linear fashion, so I couldn't correct it out in post either. The end decision was the same as what you've come to, and I simply turn it off permanently now, for fear of wrecking some shot that is important to me.

The problem with visual stabilisation only is, the camera responds to objects naturally moving within the frame, so you tend to get wobble even when the camera itself isn't moving too much. It tries to do the best it can based on visual only movement clues. I've seen videos where ceiling fans have completely confused it, where as sensor stabilisation would identify that the camera wasn't moving much and not be thrown by the fan.

Here's another example of that.
The translation of the video content is along the lines of: "Camera shake correction for movies When "Movie SR" is enabled, even when the camera is fixed, the screen shakes according to the movement of the subject"

It then translates further to say"Since the camera shake correction inside the body is attached, I thought that I can do quite a bit of movies, but I can not use Continuous AF (press the AF button when I want to do AF), I do not have a sense of resolution or moire, Sex is low.
Originally it is up to 1080 @ 30p so I do not think anyone will buy it for the movie
."

I'm picking that means he's literally getting no love from his Pentax for video...

Here's an example of better video from 7 years ago now.

Bottom line is they are well overdue for an update in the video world. They're already bottom of the pile now, and will need to adjust simply to meet bottom tier industry standards. The hope is that they address some of the fundamentals, such as returning mechanical stabilisation, upping the bit rates etc and not just slap 4K resolution on the messy package that's there at the moment.

You can work with what's provided presently, but they should be so much further ahead in this area, having been the first to provide useable sensor stabilised footage 7 years ago. With all camera reviews now including a section on video capabilities, they will need to address this at some stage.

Comment by richandfleur posted on Pentax for Video at 22/02/2017 - 19:31

richandfleur
Being a thread about Nikon, I can't comment on their firmware update policy.
Fuji however released a free update about a year back that was so big they released a new version of the manual too.

Pentax tend to provide compatibility updates for new lenses, and fix any bugs present in features at release date.
After that you need to buy a new camera to get new features, even if they were technically possible on earlier hardware.

Given the grief with the K-30 aperture motor issue also, it didn't feel like they cared much after the sale was made.

Comment by richandfleur posted on Bad News at Nikon? at 18/02/2017 - 09:35

richandfleur
Fuji are pretty great with their free firmware feature upgrades too.

Comment by richandfleur posted on Bad News at Nikon? at 18/02/2017 - 07:25

richandfleur
Tried on an ipad, didn't work.
Have just tried with ie11 on a PC, got further but this is the crapest interface I've seen in a while. Welcome to 2005...

How does one save a location?

Tried on Chrome and got a lot further, but this may need more instructions...

Comment by richandfleur posted on Pentax User Members Map at 18/02/2017 - 02:01

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo