All Forum Comments
Comment by richandfleur posted on Long exposure warning at 25/03/2015 - 21:41
That last picture looks more like it is through a window, maybe getting reflection from the lens side of the filter if it is a square filter setup.
If it was light from the viewfinder would it not be more prominent in different areas of the image?
Comment by richandfleur posted on Long exposure warning at 25/03/2015 - 21:38
Except that Australian stock prices are nothing like US prices
Bring on Black Friday / Cyber Monday in November
Comment by richandfleur posted on Pentax K3 now priced below most of the Pentax K-S2's at 25/03/2015 - 21:37
has anyone done a comparison between using the lens OS and the body's OS? I think I prefer to use the stabilisation i the body, that way I won't have to remember to switch it on/off if I use another lens.
(I've seen a lot of these discussions turn quite academic and specs based, rather than doing what Pentax does best and go out and shoot some photos)
Just remember they can't both be on at the same time, as they've interact and cause instability.
Comment by richandfleur posted on Initial thought on new K3 at 25/03/2015 - 20:32
IF Pentax/Ricoh restored mechanical sensor stabilisation during video, and everyone was suitably convinced that the code that allows for the mirror flapping state had been suitably bug tested to locate and prevent the actual fault, (rather than identify the issue was occurring and automatically reset the whole camera for you), then the K-3 would be a no brainer at this point in time...
Comment by richandfleur posted on Pentax K3 now priced below most of the Pentax K-S2's at 25/03/2015 - 20:25
I agree with Richard, however ...
start with a wider aperture value to start with, meaning more is in focus, and narrow down for the more stylised shot later one once you've got the hang of it.
The physically wide aperture has a small f number and results in a narrow depth of field but lets more light in.
For the OP, this might help should it still not be clear.

As for back button focus - this is no time to start trying that and in this scenario it's just not necessary.
Comment by richandfleur posted on Capturing moving objects clearly with a blurred background at 25/03/2015 - 20:20
Comment by richandfleur posted on pixel-shifting at 24/03/2015 - 23:38
New to photography so if you could dumb it down for me that would help also
Steve
1) is a wide aperture, lowest f value your lens can do (or close to it), which gives a narrow band of in focus area.
2) some physical separation between the subject and the background, which highlights the affect from above even more.
In practise for moving objects, you'll want a fast shutter speed to freeze their motion, or you'll want a medium shutter speed and to pan with them, which will keep them in focus but blur the background. As a photographer these selections / intentions are over to you, so imagine the shot you want, and then place yourself in a location to allow for it, and make the settings selections to achieve that outcome.
The narrower your depth of field, the more important the focus and timing is going to be, so it's probably better to start with a wider aperture value to start with, meaning more is in focus, and narrow down for the more stylised shot later one once you've got the hang of it.
You've mentioned bikes coming straight on to you, which is different from panning along side you, so I'd:
1) use a zoom lens, as mentioned by those above, zoomed enough to frame the shot as you want
1.5) set your camera to TAv
2) use a fast shutter speed, say 1/800th of a second, that sort of thing, to freeze the motion
3) select a low aperture number, say f4 - f5.6 if you are using a zoom lens
4) Switch to Manual focus mode and pre-focus on the road at the area you are interested in capturing the rider in (Others may disagree but I have close to zero faith in Pentax autofocus being accurate or fast enough to handle this sort of work)
5) set your camera to burst mode Hi
6) set your iso to float between 100 and 3200, or 1600 as the upper limit if it's a nice sunny day.
7) set your metering mode for centre weighted
7.5) shake reduction can be on for these shots, although the faster shutter speeds mean it will be doing less to actually influence the photo in reality.
Take some sample shots, and adjust as necessary if the cyclist is too blurry, or the image is too dark etc. The slower the shutter speed the more light you will let in, but the more chance of motion blur.
9) When the riders approach your pre focussed area on the road, squirt away Spray and prey as they say.
That sort of thing.
Be open to the advice of others, the above is just my thoughts on how I would approach this.
Panning side on is very similar to the above, except you'll want to lower the shutter speed, so you introduce the chance for a blurry background. For this you don't need such a large physical distance to the background as you're moving the camera to track the rider during the shot. A monopod helps with this type of shot, and generally the shake reduction should be off, as you don't want to counteract the panning movement.
Comment by richandfleur posted on Capturing moving objects clearly with a blurred background at 24/03/2015 - 19:19
Doesn't make a lot of sense, but all I know is that I've had the same results as above when I forgot to plug up the optical viewfinder.
Comment by richandfleur posted on Long exposure warning at 24/03/2015 - 00:01
Live view mode is exactly the same as what's happening when the long exposure is taking the shot, so I fail to see the point of the comparison Nigel?
#whatamimissing?
The comments in your article Steve refer to it messing with exposure metering, but in my case all long exposures are done in full manual mode with me timing the exposure on a phone app countdown. I line up the shot as I want it, take note of the aperture and shutter speed (really time) value and input these into the app, so nothing is metered by the camera itself.
Comment by richandfleur posted on Long exposure warning at 23/03/2015 - 23:07


Metering mode is affected ... Multi-pattern won't work with the old lens, it will go to centre-weighted. I'm not sure that of itself would have a great impact ?? You'd have to use stop-down metering though and manual mode for accurate results with the Tac I think ...
Just asking as I have had little success with live view also. I focus, lock the focus in manual mode, apply the filter and shoot in manual mode or in bulb mode if my required time exceeds the 30second limit of manual modes.
And why is there a 30 second limit to manual mode anyway?
So many questions...