richandfleur

Joined: 3rd December 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

richandfleur
sterretje wrote:
davidwozhere wrote:
So where do you keep (lose) the eyepiece in between times?
I use one of those plastic canisters that you get when you buy film.
What's film?

Comment by richandfleur posted on K3 banding on long exposures at 27/03/2015 - 09:53

richandfleur
noborders wrote:
Well, many thanks for all your help, it worked, such a relief, so glad that there is the help out there.
Congrats, nice to hear a good outcome

Comment by richandfleur posted on K3 banding on long exposures at 26/03/2015 - 20:15

richandfleur
redbusa99 wrote:
where does going into portrait position create contortion Nigel , i just turn the camera 90 degrees anti clockwise , my grip on it does not alter ,my right hand just goes from vertical to horizontal , the left hand does not move just stays as the support hand
Ha I was thinking the same thing. If you rotate the camera clockwise (as viewed from the back, looking through the lens, normal shooting position) then yes your wrist has to bend backwards.

If you rotate anticlockwise though, there's barely anything in it position wise, as your wrist simply rises across to your forehead, in a very natural ergonomic position.

Comment by richandfleur posted on Initial thought on new K3 at 26/03/2015 - 19:34

richandfleur
SteveLedger wrote:
richandfleur wrote:

Pentax used to include an eye piece cover, but newer models don't have this anymore.
I think it's only ever been the flagship models that come with the view-finder cap, Richard.
The K-3 has it.
Not important enough aye?

It's a pain to use though, in that you have to remove the rubber eye cup from memory if you use the official one.

Comment by richandfleur posted on K3 banding on long exposures at 26/03/2015 - 00:59

richandfleur
QuestionableCarrot wrote:
Just shoot film
Huh?

Comment Image

Comment by richandfleur posted on Resolution question at 26/03/2015 - 00:46

richandfleur
McGregNi wrote:
As far as stability goes then then the benefit stems from the increased points of contact that the larger surface area provides ... More skin to camera contact equals more movement feedback, and higher tactile response ... It enhances the man-machine interface by deepening the physical relationship.

Because of this enhanced ' closeness' the handling becomes more natural, the camera more an extension of the hands rather than something to be held.

So when it comes to physical relationships, bigger is better !
Mate that's some hippy content right there.

Personally I would use a battery grip when I needed more battery power. I think my DSLR is large enough already without needing to add more weight to balance a heavy lens.

I do know the angle you are coming from, I just agree with John in that one of Pentax's strengths is it's size, and adding a honking grip on it heads it back towards the big boys versions.

Comment by richandfleur posted on Initial thought on new K3 at 26/03/2015 - 00:43

richandfleur
davidstorm wrote:
Pentax supply a cover for the eyepiece
Pentax used to include an eye piece cover, but newer models don't have this anymore.

Have you seen this discussion link ?

Comment by richandfleur posted on K3 banding on long exposures at 26/03/2015 - 00:02

richandfleur
Yeah Kodak sell the Pentax action camera in another case, or that should probably be the other way around actually.

The Pixel shift high res concept is interesting, but only if it can give some improvement in the image quality. Simply creating a larger picture alone doesn't guarantee this. ie if you're not going to print big or heavily crop then I don't see the point. That seemed to be the feedback from Pentax, who said they had done it, but it didn't really do anything to the picture except for make it bigger.

Comment by richandfleur posted on pixel-shifting at 25/03/2015 - 23:17

richandfleur
McGregNi wrote:
yes, good points thanks Richard . So poorer low - light performance and it would be harder to get very low depths of field on the smaller sensor ?
From my point of view, these are the only two practical points that I think matter.
It's not limited to m4/3s either, as the discussion is equally relevant across all sensor sizes for a given resolution.
(so APS-C vs FF, FF vs MF etc)

The only other aspect is the 'crop factor' or reach for a given lens,

Basically the light gathering ability (size of pixels) is about the only factor that is actually resolution based across sensor sizes that I can think of right now.

Resolution is basically how fine you're sampling the image. Like what grid are you overlaying onto the image to describe it? The finer the grid the more detail will be captured, but if you're downsampling to 2MP to display on a monitor, then you've got to be realistic about how much any of this matters
Hence my utter confusion at sacrificing the light gathering ability in favour of a higher resolution capture
Short of printing large or heavily cropping I know exactly which way I'd prefer to see things go...

Comment by richandfleur posted on Resolution question at 25/03/2015 - 23:09

richandfleur
Biggest change I could see is a signal to noise ratio. Make bigger pixels and you've got more area to capture light, so you should have a stronger signal level up above the noise.

Best example of this would be a cellphone camera, potentially 8MP or so, vs a APS-C or FF camera of the same resolution.
Sony's A7s comes to mind, and that's an absolute low light monster, having a resolution of 12MP on a FF sensor.
By contrast my iPhone falls apart in low light.

So, on a bright sunny day, there is not a lot in it, but stray into less well lit regions, where you need to keep the shutter speed up to freeze motion, and you don't have or a flash is not applicable, and the differences should become far more obvious.

Only other aspect is the depth of field from the lens. The bigger you go sensor area wise, the narrower the depth of field of the lens.

Comment by richandfleur posted on Resolution question at 25/03/2015 - 22:12

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo