pentaxian450

Joined: 10th February 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

pentaxian450
simonkit wrote:
Unless you spend a lot of cash on buying high-end monitors/printers and have them all profiled then ultimately its all a bit of a compromise.
You don't need to spend a lot of cash. Most printers today do a terrific job. The important part is to make sure everything "talks the same language", i.e. use the same color space everywhere, and calibrate both printer and display. The Color Munki Photo is a good product that allows you to calibrate printers and display at a decent cost.

Comment by pentaxian450 posted on Printers??? and Printing Photos at 30/09/2010 - 09:57

pentaxian450
Before investing in new lenses, just keep in mind that the A900 is in a different league.

As for contrast and sharpness, the lens could make a difference, but I would give a serious look at your post processing skills first. I am not trying to imply that you can't do a decent PP job, but when sharpness and contrast come around, quite often, PP is deficient. When you use the kit lens at around f:8 or f:11, your results should be very close to an upper scale lens.

Comment by pentaxian450 posted on best kit lens replacement at 27/09/2010 - 01:37

pentaxian450
puma wrote:
I use two printers 1. Epson PX650 2. Epson R340 both are very good BUT the ink is well lets say not the best price out their
For my HP D7160, I use generic inks. They are cheaper, and the cartridge hold more, and they are more pigmented, which means I have to "tone down" the ink supply, thus getting even better "mileage".

Unfortunately, that supplier doesn't make cartidges for my two other printers.

As for Canon and Epson printer, you can look at Niagara Ink system. It's a loty cheaper than the stuff you buy from Epson.

Comment by pentaxian450 posted on printers what would you use ? at 26/09/2010 - 01:27

pentaxian450
I use a HP D7160 for 8 1/2 X 11 or smaller, a HP B9180 for A3+, and a HP Z3200 for large format. I guess I'm happy with HP.

The actual reason I use HP is because my print shop (as in litho, not photo printing) uses HP products for proofing, so I get good prices due to the large quantity of products we use.

Whatever printer you use, if you stick to well known brand, you won't go wrong. The results you get from all of them will be very similar. Buy what gives you the best return on your investment, taking into account the cost of ink. Don't just check the price of the cartridge, look at how many prints you can get with a cartridge. Also, make sure you're comfortable using the product you buy, and look for after sale support.

And, after all that, enjoy your prints.

Comment by pentaxian450 posted on printers what would you use ? at 26/09/2010 - 01:22

pentaxian450
You just hope you don't need to go to the bathroom when you're up there. It's a looooong way to go...

Comment by pentaxian450 posted on And you thought your journey to work was tough at 26/09/2010 - 01:09

pentaxian450
One thing for sure.
Whoever conned them had inside intel so they would know some details about the transactions going on with the council and it's suppliers.

Comment by pentaxian450 posted on Brilliant Local Council at 25/09/2010 - 11:58

pentaxian450
A preset lens has two aperture rings. One sets the aperture to the value you want, and the other one is a follower which actually controls the diaphragm. You focus wide open, then use the follower to shut the aperture to the preset position just prior to taking the actual picture.

Comment by pentaxian450 posted on Pentax Takumar 83mm f1.9 at 23/09/2010 - 18:05

pentaxian450
johnriley wrote:
for whatever reeason only Sigma, a small player, have taken it up.
Sigma likes the sensor so much, they bought the manufacturer.

Comment by pentaxian450 posted on Sigma releases SD1 (46Mp) at 22/09/2010 - 09:57

pentaxian450
It is different. As for special, it all depends how you look at it. Right now, all Sigma cameras use a lower res. version of that sensor, and the results are not like sensors with a Bayer grid. I wouldn't say it's better or worse, just different.

Comment by pentaxian450 posted on Sigma releases SD1 (46Mp) at 22/09/2010 - 02:21

pentaxian450
viewfinder wrote:
S PLEASE shoot the same subject with k20 and then D3...use a tripod and keep to 1/125 sec....RAW files. Make BIG prints (some of us only make large prints) ...now blow up a corner of each and post them here
Unfortunately for you, with the situation you describe, the K20D will show more details, IF LENSES ARE OF COMPARABLE QUALITY, unless you are using 6400 ISO. In poor light, the D3 will clearly show it's superiority, but in good lighting, and "affordable ISO" where you can use 1/125 sec., the K20D's higher sensor resolution will likely give you more details than the "mere" 12 megapixels of the D3. Move back to square one...

Comment by pentaxian450 posted on K5, Kr, full frame (?) it's all to little too late at 20/09/2010 - 01:49

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo