pentaxian450

Joined: 10th February 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

pentaxian450
Lubbyman wrote:
RobL wrote:
just bring in the autofocus improvements from the K3.III and increase the megapixel count to around 45. Surely those could be done without altering the body much
The body wouldn't need to be altered but the software would and the electronics hardware probably would. Is the current processsor and associated gubbins up to the job of dealing with the increased data from more pixels? Does the current sensor shift mechanism have the precision needed for a higher pixel density? etc. etc. etc. That's where most time and cost goes when developing a complicated bit of electronics, the box it's in is relatively cheap to develop.

Steve
The buffer of the K-3 III would also need to be improved. As it is right now, it's nothing to write home about...

Comment by pentaxian450 posted on Rule of Six at 02/01/2022 - 23:08

pentaxian450
Shoot the flash through a large sheet of white paper situated about half way between the flash and the moth while the flash is about a meter and a half to two meters from the subject at about a 45 degrees angle. Instant difffser.

Comment by pentaxian450 posted on How Would You Light This? at 14/11/2021 - 11:06

pentaxian450
RichardC wrote:
Nice write-up and test shots. I‘ve seen a few of those advertised here in Germany and wondered what they‘re about. The colours in No. 2 really pop for me.

I‘d be really interested in seeing some pictures of the mount and how you adapted it if you have the time and inclination to share!



Same for me. It seems to be a very interesting piece od glass.

Comment by pentaxian450 posted on 1930s Meyer Trioplan on a Pentax K1 at 14/11/2021 - 11:02

pentaxian450
Not a cheap one, but an outstanding one. Manfrotto 468MGQ6. You won't find one with a better locking mechanism, I use mine with a Gigapan Epic Pro with the K-3 and 60-250 zoom, and it's rock solid. The whole set up must weight about ten pounds, and it holds it securely. Amazing.
https://www.manfrotto.com/global/hydrostatic-ball-head-with-top-lock-quick-relea...

Comment by pentaxian450 posted on Tripod ball heads? at 09/10/2021 - 23:52

pentaxian450
Lenses today have more elements to better control chromatic aberration, edge sharpness, finer details and, especially for zoom lenses, distortion. Adding those elements make the lens longer. On those longer lenses for a given focal length, the entrance pupil is situated further back in relation to the total lens length, so to compensate for the extra length in front of the entrance pupil, the lens needs larger front elements to cover the angle of view, so they also need larger filters. That said (or written), about the only filter you really need in digital photography is the polarizer. Just about everything else can be done in post. With the latest cameras, if you expose to save the highlights, you can generally recover almost everything in the shadows, so you don't really need graduated filters anymore (thank god, those were a hassle to use). All other filters can be digitally created.

Comment by pentaxian450 posted on Lens diameter at 08/09/2021 - 02:01

pentaxian450
Before going to a shop, did you try resetting the camera to the factory settings to see if the problem is still present? If you reset it and the problem persist, then it will be time to go to a repair shop, but experience has thaught me that quite a few problems are "operator errors" (yes, I've done some errors in my life). Whatever the problem might be, good luck.

Comment by pentaxian450 posted on Good service shop for Pentax near Todmorden, West Yorkshire at 05/09/2021 - 10:30

pentaxian450
I wouldn't worry too much about focusing speed. Generally, the airplanes are not so close as mandating the use of AF. Just set the camera to manual focus, prefocus near infinity, and set the aperture to f8 or f11. On the K-5, you can easily push the ISO to around 800 or 1200 to get a high shutter speed to freeze the action. You can also set the exposure compensation to underexpose slightly to compensate for the sky if it's a cloudless day. Then, just aim and shoot. The planes will always be in focus, exposure will be pretty good, and you will get good details due to the rather high shutter speed.

Good luck, and most important, don't worry too much and enjoy the day.

Yves

Comment by pentaxian450 posted on Airshow photography with K5 at 15/08/2021 - 13:50

pentaxian450
The home made plug can't be used with the Gigapan. The Gigapan end of the cable is mini USB while the camera end is male 2.5 mm. stereo plug. My knowledge of electronic is insufficient to make a custom cable. But I think you nailed the problem. I'll order a new cable from Gigapan to see if it solves the problem.

Comment by pentaxian450 posted on Gigapan Epic Pro at 11/08/2021 - 14:16

pentaxian450
On the other hand, my K-3 mk iii does work with my Manfrotto MVG 460 gimbal using a "home made" solution: I use a male to male 3.5 mm. x 1 meter stereo audio cable with a female 3.5 mm. to male 2.5 mm. reducer. Pulling the audio cable slightly out of the reducer allows me to use the camera button on the gimbal to control the K-3 mk iii shutter. Now, life looks a little brighter. It never worked with the original K-3.

Comment by pentaxian450 posted on Gigapan Epic Pro at 10/08/2021 - 20:01

pentaxian450
The only wired release I own is the Gigapan. I thought somebody else having a Gigapan could tell me if they had the same issue.

Comment by pentaxian450 posted on Gigapan Epic Pro at 10/08/2021 - 11:38

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo