pentaxian450

Joined: 10th February 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

pentaxian450
Maybe you're version of Picasa is an old one. Upgrading Picasa to a newer version will likely solve the problem. I've had the same issue when I bought my K20D and then with my K-7. The version of Picasa I had wasn't compatible with the new cameras.

Comment by pentaxian450 posted on Any ideas??? at 12/06/2013 - 13:03

pentaxian450
judderman62 wrote:
-0.3 ev
Any underexposure, especially in high ISO will bring noise, especially in shadows, so make sure you don't underexpose.

Comment by pentaxian450 posted on K5 image quality concerns - thoughts please at 10/06/2013 - 03:31

pentaxian450
timbo wrote:
Now if only I had a proper camera, just imagine what I could do
Do you mean something like a 645D?

Comment by pentaxian450 posted on Well done timbo at 09/06/2013 - 13:14

pentaxian450
tyronet2000 wrote:
Lots Of Trouble Usually Serious
Well, it cant be as bad as a FIAT: fix It Again, Tony.
Or FORD: Fix Or Repair Daily.

Comment by pentaxian450 posted on Anyone Identify a Lotus? at 24/05/2013 - 17:28

pentaxian450
Eastridge wrote:
Thanks Yves, do you know the model number of the 23"? I appreciate may be different over there to here but can then research.
The model number of the 23 in. is HP 2311xi.

Comment by pentaxian450 posted on Dell Ultrasharp 23 (not 24) 12HM Monitor - differences? at 19/05/2013 - 18:38

pentaxian450
I can't comment about Dell products since I don't use them, but HP has introduced a 23 and a 25 in. IPS screens. I use both and I can say they're pretty decent, and cheaper than Dell.

Comment by pentaxian450 posted on Dell Ultrasharp 23 (not 24) 12HM Monitor - differences? at 19/05/2013 - 12:07

pentaxian450
If the frame has a glass panel to protect the picture, you should put a "subframe" in it to create a gap between the glass and the picture. If you don't, eventually, the picture will stick to the glass panel, and you wont be able to undo it anymore. Given enough time, it might destroy the picture.

Comment by pentaxian450 posted on Proper way to frame a photo? at 18/05/2013 - 12:45

pentaxian450
Camera manufacturers are trying to give a result that will be pleasing to the majority. What is pleasing to you is not necessarily what is pleasing to your neighbour. That's why there are so many different applications for post processing. On top of that, the processing power of a camera is not the same as a full size computer.

Comment by pentaxian450 posted on K-5II camera profile at 17/05/2013 - 17:25

pentaxian450
bjolester wrote:
Would it be possible to use the same kind of threaded hood for both these lenses?

Bjørn
Since the angle of view of both lenses is different, one of the lens would suffer with a hood common for both.

If you get a hood that's right for the 28mm, it would let too much extraneous light on the front element of the 50mm lens.

On the other hand, if you get a hood that covers just the field of view of the 50mm lens, you will have some vignetting caused by the hood on the 28mm lens.

Comment by pentaxian450 posted on SMC A50mm f1.2 vs FA 43mm f1.9 limited at 17/05/2013 - 14:42

pentaxian450
Ralphpiano wrote:
but I find with my Pentax a get a lot of blur on the drops even at 1/64 flash power.
Use a small aperture, dim the room as much as practically possible, and use the flash for the given aperture. That way, you should be able to get perfectly frozen water drops.

Comment by pentaxian450 posted on Can I increase the flash sync speed? at 16/05/2013 - 00:36

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo