McGregNi

Joined: 31st March 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

McGregNi
jemx99 wrote:
Very nice shots Nigel, I like the lighting and also how you have kept the background nice and dark. And again the K7 and SMC F35-70mm combo does the business!
Thanks Jeremy, and yes the good old combination is still going strong

autumnlight wrote:
Superb shots, love the lighting and the dark background and your little model is stunning.
Thanks Maria, much appreciated

bwlchmawr wrote:
A delightful set, Nigel. What lovely lighting and a relaxed sitter too. Now I challenge you to see if the set-up can capture a squirming, uncooperative, fast-moving baby...
Actually for most of the time she WAS a squirming, uncooperative baby !. Lucky those flashes are lightning fast


Mark, always glad to talk about flash techie stuff ! The main problem we have for radio triggered HSS is that the cameras do not emit a flash trigger signal at all once beyond the max sync speed, UNLESS there is a Dedicated HSS capable flash on the hotshoe AND that flash is set for HS Sync mode. And that signal is a special type that is only recognised by the HSS flash on the hotshoe.

So, that means that we are limited to optical triggering, which is the system used of course by the dedicated system.

The Cactus RF60 flash and V6 Transceiver units have a number of key advantages as an HSS solution for us Pentax people, I believe, assuming that we are happy to stick with optical triggering, and it was this technique that I demonstrated on the PF thread linked earlier.

The key advantages come from the RF60's ability to emit a true HSS continuous burst of light, plus its ability to be set to trigger on the Pre-Flash from the Dedicated flash on the camera (with the correct OS mode plus delay value set by the user). Also, the V6's 'TTL Pass-Through' mode allows us to use the V6 on the camera to retain radio remote control of power and flash zoom (so no need to access the flash control panel once its all set up). This is important because as you are experimenting and changing the HSS exposure times you will need to keep adjusting the flash output power in response ....(shorter time values needing more power) .... the V6 makes this very easy from the camera.

But also, here's the real bonus .... the V6 'Pass-Through' mode tricks the camera and dedicated system flash into thinking they are directly connected, and so the HSS flash on top of the V6 performs normally with all modes available (HS Wireless P-TTL Master or Control). Thats the key to getting the reliable HSS performance which is consistent in approach to the dedicated optical technical. At least I feel its the most reliable approach .... certainly there are plenty of endless questions and reports about problems with some of the other 'workaround' types of getting a trigger signal.

Comment by McGregNi posted on A Recent Portrait Shoot at 09/01/2016 - 17:10

McGregNi
richandfleur wrote:
like
Thanks! Ah, now is that what would happen if we added a 'Like' button to this site ?

Thanks also Stephen, Karlo & Mark

Mark, regarding the HSS situation with cactus .... firstly obviously, this particular portrait set does not use HSS (there is not ambient lighting in these shots here). If you want to see my demo of multi-flash wireless HSS with the Cactus RF60 then click through to PF here ..... link

The main thing to appreciate with HSS and a manual flash like the RF60 is that it is not possible to directly trigger that flash by radio signal from the transmitter on the camera. This is because above 180thsec the Pentax DSLRs do not send a standard triggering signal that the transmitter can respond to. The only way to generate the firing signal is via a dedicated system flash on the hotshoe that is set for HSS Sync mode. This dedicated flash will send out pre-flashes for both metering and mode / power instructions to any dedicated system slave flashes.

These pre-flashes can only be interpreted by dedicated system flashes set as slaves. The RF60 cannot interpret these signals but it does have both an 'HSS Sympathy' mode (which generates the continuous pulses of 'HSS type' output), plus it has 2 'Optical Slave' modes (which turn it into a 'dumb slave'), which means it will fire when its optical sensor 'sees' another flash firing. So to get it to fire an HSS output it is necessary to activate both HSS Sympathy mode AND one of the two optical slave modes.

OS1 mode fires on the first detected flash, which when working with a Pentax flash in HS mode will be the first pre-flash from the on-camera triggering flash. This necessitates a delay to be set on the RF60 of around 90-115milliseconds (depends on camera model and flash model) in order for the output flash to fire at the correct time after the pre-flashes have finished. The dedicated system flashes manage all this automatically (see, we ARE getting plenty for our money), but the RF60 needs it all to be set up by the user.

The OS 2 mode fires on the second detected flash (normally expected to be the actual exposure flash) but if you are operating your Pentax on-camera trigger flash in 'Wireless Control' mode then there is an additional pre-flash to send mode and power output information to the dedicated slaves, and the RF60 will detect that instead ... so a delay of around 12-18ms is needed in this optical mode.

So ... the Cactus flash is not triggering any other flashes ... that only happens to flashes set to 'dumb optical slave' mode. The dedicated system flashes are not operating in dumb slave mode, but rather P-TTL wireless, and in fact the entire Pentax flash system would be unaware of the RF60s presense .... they function as two completely separate side-by-side systems. The RF60 detects the pre-flash of the on-camera flash, then waits for the set delay until firing, as it is operating as a 'dumb optical slave'.

My use of the V6 is entirely optional. I used it on camera in the HSS shoot as a convenience, because its radio control functions for power and flash head zoom still work with the RF60- even though the RF60 is not getting its trigger signal from the V6.

With a V6 on the camera, you can attach your Pentax dedicated flash on top of the V6 and activate 'TTL-PassThrough' mode on V6 .... the flash now 'thinks' is is directly on the camera and is unaware of the V6's presence.

Comment by McGregNi posted on A Recent Portrait Shoot at 08/01/2016 - 17:40

McGregNi
I took a lot of time to read up and try and digest the jumble of information and questions surrounding the issues. I specifically wanted more power and multi-flash capabilities for HSS but didn't want to have to buy another (3rd) dedicated system flash. Plus I needed some radio remote control for those inaccessible positions where optical communication is unreliable.

I liked the idea of remote power and zoom control from the camera, plus the V6 provides expansion options with its 4 groups for the same channel (so I could, for example, get another V6 to use with one Pentax flash if I needed remote manual control, or another RF60 for a two-flash manual radio system. So there's expansion potential there.

I think they are very good value for the features, and are well made. Not the same build quality as the Pentax flashes as they are built more to a budget, but certainly not cheap and nasty. However I also feel that the Pentax P-TTL dedicated flashes are very good value for what they offer. The two systems can be made to work well side by side, I feel they complement each other.

Of interest is the fact that when combining manual flash exposure from the RF60 with P-TTL from the Pentax units, the two do not interfere with each other at all ... this is because the RF60 does not fire until the main flash trigger signal occurs, and the P-TTL pre-flashes have already finished. So the Manual flash light effect is not seen by the Pentax metering system .... it is something to be manually controlled and added in separately.

Comment by McGregNi posted on A Recent Portrait Shoot at 07/01/2016 - 22:22

McGregNi
I love the Cactus equipment, and it integrates well with the Pentax flashes as you can use the V6 on the camera with a Pentax flash on top of that in what's called 'TTL Passthrough Mode'.

If you haven't seen it already check out my thread here .... link ....

I know you were interested in HSS work Richard, and I've put it all together in that demo with the P-TTL system as well. But you do still need a P-TTL Dedicated HSS capable flash though. I'm very happy with the approach though as its reliable, better than some of the other 'workarounds' which seem to keep giving people so many headaches.

The advantage of the RF60 is that, just like the Pentax flashes, it emits a true HSS continuous burst of light when set to its 'HSS Sympathy' mode ... many manual alternatives do not do that. This makes the exposures very accurate and reliable. The power and flash head zoom can still be controlled remotely by radio from the V6 even though the actual triggering is optical via the sensor on the RF60.

In this set here I took advantage of the radio aspect by using the RF60 behind the sofa, so 'out-of-sight'. The Pentax flashes performed beautifully alongside it though in fully automatic P-TTL wireless mode.

Comment by McGregNi posted on A Recent Portrait Shoot at 07/01/2016 - 21:41

McGregNi
Aitch53 wrote:
Yet...
Can't you see Richard holding his breath?

Comment by McGregNi posted on sd card question. at 07/01/2016 - 20:44

McGregNi
I managed to persuade (well bribe!) the eldest daughter to stay still enough for me to mess around and get a few shots .... for a short while before she found better things to do .

Taken with the K7 and SMC F35-70mm. The lighting is with a Pentax AF-540FGZ in a softbox to the right (P-TTL wireless), a side/rim light from behind left with the Cactus RF60, and an on-camera fill-in with the Pentax AF-540FGZII (bounced into a corner over my left shoulder - P-TTL wireless). The Cactus was controlled remotely from a V6 transmitter on the camera hotshoe with the on-camera flash on top of that ('TTL Pass-through' mode)..... and yes, I had just as much fun setting that all up as I did taking the photos!

Thanks for taking a look ......


Comment Image




Comment Image




Comment Image

Comment by McGregNi posted on A Recent Portrait Shoot at 07/01/2016 - 20:35

McGregNi
Very nice perspectives on these huts, and it's refreshing not to see the usual bright primary colours! Lovely tones and the light on the sand is gorgeous. I do think the rather obvious halo 'bloom' around the sky outlines is a problem though, presumably the result of the HDR process ....i wonder if some burn tool work might help?

Comment by McGregNi posted on Sutton on Sea Beach Huts at 07/01/2016 - 19:14

McGregNi
I'll second that , good luck..... Sounds like the batteries will be fine, but I wonder if you might want to have the 16-50mm exercised a bit during this time ? Haven't we been hearing that SDM motors should not be left inactive for long?

Comment by McGregNi posted on Discharging and storing batteries. at 07/01/2016 - 19:10

McGregNi
Glad you got through it ok, and it would be great to see some of the results. 'Washed out' sounds like possible overexposure, so I'd be checking your apertures and ISOs to be sure you weren't exceeding those limits in relation to the distances.

As I said before, in general I recommend keeping tight control over aperture and ISO settings for flash photography. The shutter 'speeds' are used to vary the amount of ambient light recorded, and again generally would be better fixed unless that ambient light is changing.

The actual flash brightness in P-TTL mode is controlled by Flash Compensation.

You may not be like me, but I've anyways enjoyed reading books on photography technical matters, so books on flash are right up my alley! So I always suggest reading through good books on the subject, plus also you've got my Guide available (link below my posts) which puts the Pentax -specific angle onto it.

Comment by McGregNi posted on Using AF-540 FGZ flash for an event tomorrow- a few questions at 05/01/2016 - 18:52

McGregNi
I can confirm now that my version of PDCU (4.40) does display and edit the out-of-camera jpegs from my K7. I ran through a few steps which all worked fine.

One point I noted was that automatic options for Lens Corrections were greyed out, but the manual adjustments were available. The lens was the DA18-55 AL WR which certainly does have automatic lens corrections available for the RAW files. I can only assume that once the JPEGs have been processed in the camera that the specific metadata that relates to the lens corrections is not saved by the jpeg format ... ?

However, if the lens corrections were activated already at the capture stage on the camera then there should not be any need for additional automatic corrections .... you can tweak things manually if needed.

So it does work for jpegs. I chose 'Save As' from the File menu once I'd finished the adjustments, and was able to choose a new name and file location .... there is the option of saving as another jpeg (with 4 'compression' levels), or an 8 or 16bit TIFF file. The default image size (pixel dimensions) is the full size as saved originally by the camera (in my case they were full size 14.5mb). But there is the option in the 'Save As' dialogue of choosing custom sizes for your new jpeg versions.

So its really quite a comprehensive set of options for saving new edited versions of your jpegs. The original jpeg from the camera will not be overwritten or changed at all if you choose the 'save as' option from the file menu. I would keep the two versions in separate folders on the computer ... one for the originals as backup, and one for your everyday use of the edited versions. Then be sure to backup the computer or keep copies of your photo folders also on an external drive (or 3 !).

You are likely to find that for many shots, so long as you have set the custom image controls well on the camera, that you won't be needing any further editing for many shots. But some may benefit from further adjustment.

PDCU is an option for you .... it can be a slow programme to run, so some patience may be needed when its starting and you're browsing your folders to select images to work on. If you know your camera controls well then the interface of PDCU is very similar. The interface and editing features of PhotoShop Elements is certainly more suited to working on jpeg files, with far more control and choices ... but its a personal preference as to whether you want to start out learning about working with PhotoShop tools or not.

Comment by McGregNi posted on Pentax processing software. at 04/01/2016 - 23:47

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo