All Forum Comments
Comment by McGregNi posted on My K5ii chews up SD cards at 18/11/2016 - 10:43
I'd have tried a different make of card also to see if the problem occurs with that as well. But since its clearly an issue with the card slot or the manner in which you are handling the process, then if you can't resolve it then definitely switch to a cable technique and keep one card in all the time .... Make regular file transfers to a computer and back those up, and keep using the one card.
At the first sign of any file saving, image display or corruption issues, then carefully replace the card with a new one.
Comment by McGregNi posted on My K5ii chews up SD cards at 18/11/2016 - 08:26
Eg, to add to wide angles and telephotos, standard lenses, zooms and primes etc, there are macro lenses, tilt-shifts, close focusing options, extension tubes and bellows ..... It's arguable that if we do not take advantage of at least a few of these specialised options for our camera, that we are not really using our DSLR as it was intended, and not utilising it's potential.
Comment by McGregNi posted on Changing lenses at 17/11/2016 - 15:46
The only meaningful type of test I could think up would be where an image was captured and the best look created by setting adjustments on the first camera .... Then subsequently they try to get the same look on the other cameras, and rate how difficult each was to achieve or where it was not possible to achieve something given the limitations of the setting sliders available.
But ultimately, even that test comes down to ' how I like my photos to look' .....
Comment by McGregNi posted on The Great JPEG Shootout (The Camera Store) at 17/11/2016 - 12:16
As I see it, surely, the entire purpose, the reason to exist, it's whole point in life, of a DSLR is to change lenses, and to change them whenever the photo you want demands it.
Comment by McGregNi posted on Changing lenses at 16/11/2016 - 08:23
This theme has been done a number of times before, and the bottom line is, it's going to have to be dealt with according to the laws and practices in place to protect the consumer. Everyone hear will wish you luck with that process and support you getting a fix that is deserving under the circumstances. And it's helpful for others here to know how that goes and to learn from those experiences if it might happen to them.
Your warnings about the newer models are only too well and clearly heard, don't worry about that. People will judge the risks vs cost equation for themselves.
I know I've been very fortunate ... One Pentax camera, the K7, around 60,000 shots so far, nearly 5 years use, and not one single issue or failure .... Same with all my lenses and flashes! So its difficult to see the overall picture in the same way as you, although I can understand those feelings, for sure. But best to plan how best to move forward with that particular camera now. If you are doing some pro work, then wow! Why would you be using a K50 now? The higher range Pentax models offer a great deal of strength and durability for high demands and more rigorous use.
Comment by McGregNi posted on K-50 photos underexposed at 14/11/2016 - 11:46
Comment by McGregNi posted on Wireless Triggers for K3II/K-1 at 11/11/2016 - 20:39
Manual HSS is a good step up in complexity over automatic HSS, more difficult to manage in a dynamic environment, because every exposure time adjustment ('shutter speed' ) requires a compensating adjustment to another parameter ...(ISO, aperture, distance). This is not the case for automatic HSS exposure (ie the Pentax proprietary system), as the flash output is automatically adjusted in that case.
So, in outdoor, dynamic fluid situations, and especially where the ambient light exposure needs adjustments, then manual HSS adds to the workload. But, the advantage of remote radio control, plus the big benefit that brings with communication reliability over high distances, may outweigh that other disadvantage.
I'd be careful to double check with Cactus, on their community forum, that your Metz flash is tested and confirmed as HSS compatible with the V6II before committing.
Comment by McGregNi posted on Wireless Triggers for K3II/K-1 at 11/11/2016 - 16:04
The other situation, badgers, and I presume with darkness all around, is more of a puzzle. Exposure wise it is a likely candidate for overexposure automatically, as large areas of blackness and a relatively small subject in the frame will trick any TTL exposure system into overexposure. So not seeing the flashes effect suggests more a communication/triggering issue, unless the distance involved is too great for the ISO and aperture. Have you tried to zoom the flash head in order to more tightly target the subject?
Comment by McGregNi posted on Metz 52 as control and slave not exposing properly at 11/11/2016 - 15:50
You need 3 transceiver' units in order to control 2 flashes, one in Transmitter (TX) mode on the camera hotshoe, and one on each flash in Receiver (RX) mode. So not the cheapest solution, but a reliable and practical one, especially if your flashes are placed in difficult positions or you need to make frequent adjustments to power, and want to experiment with differing effects.
Or go a big step further and get the latest V6II models, and you can add remote manual High Speed Sync plus remote flash head zooming to your arsenal!
Comment by McGregNi posted on Wireless Triggers for K3II/K-1 at 11/11/2016 - 15:08


It's long been known that the SD card slot in these models causes a difficulty in that the gap between the body of the card and the open slot door is very small. Any normal adult male fingers are not really ideal for the task of gripping on to the card to pull it out. Inevitably there will be some sideways pressure between the wall of the slot and the card casing, and if that is too much then there will be sideways force and bending applied to the card.
It's a case of finding an effective but more delicate manner to carry this out. I sort of brace my index finger against the door but then only use the very tips of finger and thumb to ease the card out, bring sure to avoid any sideways force.
But if it can't be done delicately enough, then find another way. I wonder if tweezers could grip the card securely without damage? With those you should be able to extract it straight upwards