McGregNi

Joined: 31st March 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

McGregNi
Well there are teleconverters with AF 'passthrough' ability, but maybe you're right, no tubes for that .....?

Comment by McGregNi posted on Manual Extension Tubes at 22/11/2016 - 15:08

McGregNi
It was seeing your post that prompted my question, because you referred to tubes with 'electrical contacts so you can use auto focus, set the aperture and stop down the lens'. Clearly the autofocus aspect is not going to be relevant for the OP, who is using M42 and 'manual K mount lenses with an aperture ring'.

So I was thinking that these autofocus types would be rather expensive and not needed. I wondered if there were types with just the contacts but not AF capable that would allow stop down metering, but be at a lower cost.

Comment by McGregNi posted on Manual Extension Tubes at 22/11/2016 - 13:11

McGregNi
It depends on the lens you want to use, I'd think ....

For tubes with no contacts, then I believe you need an old lens with 'Manual Aperture' setting (as distinct from Manual focus, which is a different thing). None of our more recent Pentax Manual focus Lenses (that's K, M & A types) are Manual Aperture, they are all Automatic Aperture lenses as I understand it. That means they default to the wide open position to aid brighter focussing, and even setting the aperture on the ring will not move the diaphragm down until the point of capture.

So with no contacts to make the lens stop then, as with manual tubes, then I believe we need full Manual Aperture lenses (ie such as M42 ..?) that stop down as you turn the ring and remain fixed in the set position.

Obviously Autofocus capable tubes are not needed for any of these old lens types, but I wonder if there are tubes with contacts that will enable the normal 'stop down' metering type approach with automatic lenses?

Comment by McGregNi posted on Manual Extension Tubes at 22/11/2016 - 12:55

McGregNi
A good test and ISO 1600 stands up well. The technique would be very useful in a pinch for some subjects, but here I feel the environment demands a critical sharpness, which is missing. So nothing beats a tripod!

Comment by McGregNi posted on K3II Stress Test at 21/11/2016 - 18:20

McGregNi
Philip, a great day at Stowe, clearly! 4 and 5 are the picks for me .....4 has an excellent layout of elements and conveys good depth, and 5 has that strong perspective and framing.

1 and 2 would benefit from a wider viewpoint or focal length to add some extra foreground, I think.

It's the built highlights here that add so much, that are so integral to the place. I guess the landscape alone is more of a challenge.

Comment by McGregNi posted on Stowe Structures at 21/11/2016 - 17:57

McGregNi
commando mode was clearly the right one! Well worth the effort and mess I'd say! I'm not sure I'd be happy with that thing getting so close to my face, although I suppose you did have a magnesium alloy camera between the two of you

Good focusing, DOF effect and as Gary said, the viewipoint really makes them.

Comment by McGregNi posted on Blue tongue lizard at 19/11/2016 - 11:22

McGregNi
As I said, there's no argument between us, and I wont make one. But you would be best to temper your expectations, both about what WR means, and what you can expect to be told. You were the one repeatedly asking for others interpretations' of what the written material meant. But you cant expect the answers to be only the ones you want hear.

Comment by McGregNi posted on Pentax k-1 Backscreen Issue at 18/11/2016 - 15:57

McGregNi
There is no reason to assume the camera can only handle a little spray from a rain shower .....but then again there's no reason to assume it can handle underwater submersion, which may involve some sustained pressure. The reality is probably somewhere between these two.

I would never automatically think that any complex electronic device can survive immersion, quite the opposite, unless it was a dedicated purpose built item for underwater.

You're not talking to Pentax here, so there's no argument between us. Here we are other users with a range of opinions, and that's ok to explore. But if you want some sort of therapeutic gain to be had from experiencing a kind of collective, community sense of outrage and verifying of your own attitudes to it, then you may be disappointed.

Comment by McGregNi posted on Pentax k-1 Backscreen Issue at 18/11/2016 - 14:46

McGregNi
The key is with the colon : This means that the words before the colon are a section heading, ie what comes next is about the dust and water protection aspects of this camera. What comes after the colon is the actual information and detail that applies.

A more grammatically perfect version would have ' Dust and water protection' before the colon, but we're used to seeing obviously translated English from Japanese text in manuals and marketing material.

Comment by McGregNi posted on Pentax k-1 Backscreen Issue at 18/11/2016 - 12:39

McGregNi
Absolutely, gosh, if I ever got a K1 I think I would be so careful and worried about it that I wouldn't ever take it out of the camera bag, perhaps just occasionally to place it on a very soft bed to have a look at it and perhaps give a gentle wipe with a non abrasive cloth on the body surface.

Tongue back out of cheek now .... I can't understand your confusion over that quote you gave above .... It clearly states that the camera is dust, rain and splash proof, and not waterproof (ie 'not waterprotected').

I accept that some marketing might convey a mixed message to some people not familiar, but a little research should clarify the construction and limitations of the camera body. For the price the K1 offers an extraordinary level of strength, solidity and protection from the elements.

Comment by McGregNi posted on Pentax k-1 Backscreen Issue at 18/11/2016 - 10:53

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo