golfdiesel

Joined: 12th January 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

golfdiesel
patrickt wrote:

So, on my second DSLR I used the films. I bought them for PDAs and cut them down to size. I never did manage to put one on without bubbles. I wear my camera as a stroll and after a few weeks the film would start peeling off. So, I bought a glass cover made by Giotto. It stayed on my camera.
Putting them on without bubbles is easier when you use the method that Zagg uses for the InvisibleShields. Spraying the sticky side with a very diluted soap solution does the trick. It allows for some movement of the film when you apply it and you can easily push out the bubbles with a credit card and when it dries you will allmost certainly end up with a protector without bubbles.

The glass screens from giotto look very good as well, but I couldn't find a distributor for it in the Netherlands and importing was very expensive. The stores in the US that offered it asked for about 50 dollars in shipping and handling...

Comment by golfdiesel posted on LCD Screen Protectors at 26/10/2009 - 17:17

golfdiesel
I tend to avoid using a flash in a nightclub or at a concert.
It distracts people/artists and you can get very harsh effects with it.

I really don't mind using ISO 800 or 1600. This gives quite good results with my K20D.

Comment by golfdiesel posted on Nightclub photos - any Tips? at 25/10/2009 - 18:11

golfdiesel
Anvh wrote:

I went for Pentax just to be sure and their flashes are made by sunpack BTW
But when I see how poorly they designed the battery door on the 360 has put me off a little on the Pentax flashes...
The 540 has a different construction though when I recall correctly.

Are you sure that the Pentax units are from Sunpak? How on earth does Sunpak manage to create such hideous designed flash units themselve?
Funny though that Sunpak hasn't got a dedicated Pentax flash in their lineup (Canon, Nikon and Sony only).

Comment by golfdiesel posted on In a Dilema: Which Flash should I go for? at 25/10/2009 - 15:13

golfdiesel
The Invisibleshields are very easy to clean though.
I simply use a dry microfiber cloth and it works perfectly.

Comment by golfdiesel posted on LCD Screen Protectors at 25/10/2009 - 15:08

golfdiesel
It is an old thread but instead of starting a new one I will add my experience to this thread.

I have allways been reluctant to use screen protectors since I have never managed to get one on a screen correctly so that it doesn't look ugly.

The top layer on the LCD's of our DSLR's are usually very tough ( I never had a scratch on one of them). But recently I bought a new toy, a Garmin Gpsmap 60csx which has a top layer which is slightly less tough then the ones that Pentax uses and the risk of dropping it is a bit bigger as well.

I did some searching and I ended up with the InvisibleShield covers. You apply them wet (a spray is included) so that you have some chance of moving and repositioning. I decided to buy one for the Garmin and I ordered a set for my K20D as well. For the K20D it comes with protectors for the rear and top LCD. For a change these protectors do work and once they have set (about 24 hours) they are still visible but it is not degrading the quality of the image.

I did "change" the user manual a little bit, it says to lightly spray the sticky side but it works a lot better when you simply soak the hell out of it (thank god for a weather proof DSLR ).

Comment by golfdiesel posted on LCD Screen Protectors at 25/10/2009 - 13:32

golfdiesel
I am allso facing this dilemma now...

My trusty AF360FGZ has a broken battery door latch. (stupid construction).

The Metz 58 AF-i is Euro 289
The Sigma 530 DG super is Euro 219
The Pentax 540 is Euro 339
The Metz 48 AF-i is Euro 170

The Metz 48 only has wireless slave mode so I am not sure if it has full wireless TTL mode like the others. So I'll probably leave that one out.

The most appealing in terms of price will then be the Sigma.
The most appealing in terms of features will be the Metz.
and the most appealing in terms of certainty that everything works will be the Pentax.

Metz allways had a softspot with me because of their legacy in supberb flash units.
A advantage to me as well is the fact that the Metz has a USB port which allows for firmware updates.

It is a difficult choice especially because it is quite a bit of money...

Comment by golfdiesel posted on In a Dilema: Which Flash should I go for? at 24/10/2009 - 22:55

golfdiesel
PeteL wrote:
Nice Lens Shame about the weight! (And Price)link

Regards - Pete
It is nicknamed "Sigzilla"

It received this name after the 50-500 was named "Bigma" and the 300-800 got the name "Sigmonster"

Comment by golfdiesel posted on I need a bigger Tripod! at 24/10/2009 - 22:40

golfdiesel
I sent a image taken with my K20D and Sigma 50-500 to the photome maker a while ago and he fixed it in the beta version so it is recognised correctly.

Comment by golfdiesel posted on Sigma 150-500mm EXIF data at 21/10/2009 - 21:57

golfdiesel
Thordell wrote:

Never bothered with the ist DS either and the number of those would keep me busy for a day should I choose to do it. Actually tell me, does the latest always include all the updates.
Firmware update doesn't take more then 5 minutes...
Just download the latest one, put it on a SD card and follow the instructions...

Comment by golfdiesel posted on New K-7 firmware? again??? at 10/10/2009 - 13:24

golfdiesel
In the 70's and early 80's the Formula 1 tracks were covered in Pentax banners.
But in the 90's the marketing department seemed to have completely died out.

Comment by golfdiesel posted on DPreview K-7 review at 04/10/2009 - 11:27

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo