All Forum Comments
Comment by golfdiesel posted on What is the actual use of TTL and P-TTL? at 23/11/2009 - 22:35
One could say that every manipulation would stop it from being photography.
Comment by golfdiesel posted on Not all may appreciate HDR at 23/11/2009 - 21:49
I took a couple of pictures of my car which is white (allthough incredibly dirty at the moment).
The difference is staggering between A and P-TTL.
With my 360FGZ I mostly used the flash in manual and the camera in manual as well but now I can leave it in P or Av without problems and just put the flash in A mode.
I will test it shortly at a place which has a lot of people in it (allways difficult to get good exposures there).
I am loving this Metz flash more and more.
And I agree with George about the pre-flash being very irritating in a lot of occasions. I had it to many times that a person/animal reacted to the pre-flash and the shot was ruined. That's why I switched to manual (thanks to the guide that Matt wrote).
Comment by golfdiesel posted on What is the actual use of TTL and P-TTL? at 23/11/2009 - 21:47
What exactly is the use of TTL and P-TTL metering?
The Metz (described by someone here as a retread tyre compared to a new tyre ) has an 'A' setting in which it uses an photocell to determine the amount of light, just like a lot of flashes in the old days did.
I have been doing some comparisons between P-TTL and A mode on my K20D.
The results are that in just about every scene the exposure result is virtually the same (and a LOT better then my AF-360FGZ ever managed, even at close distances) and if you have some highly reflective item in your scene like a TV for example, then the exposure in 'A' mode is a lot better. In P-TTL the scene is underexposed by allmost 2 stops whilst in 'A' mode it is just about half a stop under exposed due to the reflection.
It seems to me that all the new fangled modes are more and more a cost issue than of actual use. A flashgun which only supports TTL and P-TTL will be cheaper to produce then a flashgun which allso includes the circuitry for the 'A' mode.
Comment by golfdiesel posted on What is the actual use of TTL and P-TTL? at 23/11/2009 - 19:22
Original image: http://aorist.livejournal.com/207601.html
Comment by golfdiesel posted on Not all may appreciate HDR at 23/11/2009 - 18:50
I have just ordered This monitor so hope its not a bad one, certainly tons better than my current model
But what I have noticed is that most CRT's are quite good out of the box and that TFT's absolutely need profiling/calibrating before colour reproduction is good. Mostly brightness and contrast are turned up way to high. Allso my experience with different IPS panels is that it is best to leave the whitepoint of the screen on it's native setting and then profile the screen. This gives a more stable situation over time. When you adjust the screen to let's say 6500k manually there can be more drift over time. I had my screen first at 6500k and I had to use my Eye-one every two weeks and now that it is at it's native whitepoint it is stable for more then 4 weeks.
Comment by golfdiesel posted on views of a professional at 23/11/2009 - 10:20
The last time I looked it took a long time to find a CRT monitor...
I think that my NEC 20WGX2 Pro is at 99% of the level that my IIyama Visionmaster Pro 450 performed at. For me this is good enough to get rid of a 30kg beast.
My eyes are allso very gratefull that I switched to a TFT, even at 100Hz my eyes started hurting after about 2 hours working.
Comment by golfdiesel posted on views of a professional at 22/11/2009 - 16:20
Some of the things he said made sense, but others were a little so-so...
-A point on which he was absolutely right was cleaning up the mess on your PC... After you select the keepers from a shoot just delete the rest.
I tend to keep everything on my PC...
- A point on which I can partly agree. He concluded that shooting RAW was useless because if you know exactly what you are doing then JPEG is good enough.
Ok, yes, he has a point because of you have the lighting and exposure
aboslutely spot on then JPEG is indeed good enough. But what about the situations that there isn't enough time to make sure the exposure is right and/or there is so little light that noise reduction is important afterwards?
I have my camera in RAW for 99% of the time but I can understand that if photography is your income than the extra time needed in processing will probably take up a lot of time.
- He allso made the remark that TFT monitors are aboslutely useless for photograpy work... Hmm he is using an old 19" Dell CRT and yes, I must say my old IIyama 19" is more accurate then my current TFT screen, but if I were to make money out of my photography I would certainly get a top spec TFT like a Apple Cinema Display or one of the screens specially designed for graphical work.
He spoke about the narrow viewing angle and that it affects colour reproduction. That is true but if you have a good quality screen with an IPS panel than the viewing angles are large enough for normal work.
Comment by golfdiesel posted on views of a professional at 22/11/2009 - 13:27
Thanks for the effort you have put into it.
I don't use AF-C very much, but when I use it on my K20D I do get the feeling that it is very slugish, that said I haven't used a Nikon or Canon to see/feel the difference.
Low light performance is something I run into some times, but mostly I put the flash unit on the camera and if I don't use the flash itself I use the spot beam of the flash unit.
Comment by golfdiesel posted on K7, K20 and AF at 22/11/2009 - 13:17
I would still go for the Pentax 540! Call me old school, I don't mind but why would you put a retread tyre on a sportscar? Go for the Pentax or go home..
They have been making flash units since 1952 and they still produce them in Germany.
They are the 3rd largest producer of flash units.
Comment by golfdiesel posted on In a Dilema: Which Flash should I go for? at 19/11/2009 - 16:51


It is getting the correct data from the flash.
If you turn the flash on in 'A' mode then you have to select the aperture and ISO rating. The moment you put it on the camera and you half press the shutter button the settings for the aperture go away and it is using the aperture data from the camera.
I tried it with different aperture settings on the camera and each time it was working correctly.