golfdiesel

Joined: 12th January 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

golfdiesel
K20D:
When using the cable remote and no selftimer selected the SR system is on.
Cable remote and 2 sec delay => SR is off

When you select either of the modes for the wireless remote on the camera then the SR system is off.
For the wireless remote it is allso because it has no half-press setting for focussing and stabilising.

Comment by golfdiesel posted on Shake reduction off for tripod use - why? at 30/11/2009 - 16:38

golfdiesel
I have been wondering about the same Stefan, so I will join in with this question

Comment by golfdiesel posted on Help with stacking at 29/11/2009 - 13:53

golfdiesel
Jessop claims that the 360AFD range are for digital camera's and have dedicated TTL, so it could be that it has P-TTL support.

You could take a close look at the contacts on the flash and camera. I had some oxidation on the camera hotshoe so my new Metz didn't make contact very well at first. After cleaning the contacts it works perfectly.

Comment by golfdiesel posted on Jessops 360AFD problem at 29/11/2009 - 12:13

golfdiesel
chrism_scotland wrote:
I'm almost tempted to forget the GX20 based on that.....
GX20 is based on the K20D not on the K-7.

Comment by golfdiesel posted on For all the Doubters ...Its Official !! at 27/11/2009 - 23:22

golfdiesel
Quote:
Although Pentax lags some way behind Canon and Nikon in worldwide sales, its digital SLR cameras have seldom been less than excellent, and at their best can match or exceed anything the mass-market competition can offer.

Comment by golfdiesel posted on For all the Doubters ...Its Official !! at 27/11/2009 - 23:21

golfdiesel
The Metz user interface could be a lot better, but it makes up for it in performance.

I would suggest to take a look at the Metz 58 AF-1 as well. In addition to a higher output it allso includes an 'A' mode which enables you to turn away from P-TTL to loose the pre-flash but still have a very accurate light measurement.
As I have written in another thread this (the A mode) gives better results on my K20D then P-TTL mode. In terms of performance it completely blows away my 360FGZ.

Comment by golfdiesel posted on Metz 48 AF-1 digita v. Sigma EF 530 DG Super and a Pentax Hot Shoe at 27/11/2009 - 23:19

golfdiesel
stu49 wrote:
mattcambs wrote:
I shoot RAW + JPEG (lowest size and quality) so that I can view the images on the camera.
Surely u can do this with just raw files !? No need for jpg at all !!
or am I missing something ??
Exactly there allready is a low quality JPEG in the RAW file.
What I can imaging is that if you use a imagetank with a large reviewing display then the JPEG can come in handy. Not all imagetanks can display RAW files.

Comment by golfdiesel posted on 'RAW + JPG' !? at 27/11/2009 - 20:56

golfdiesel
Has anyone noticed that if you are the last one posting in a thread you can edit/delete your post but if there have been posts after your post then you can't seem to edit the posts anymore. At least that is my experience.

I wanted to edit a post to replace a picture with a link to prevent copyright issues but for some reason I can only edit a post if I am the last one posting...

Comment by golfdiesel posted on Strange forum behaviour at 25/11/2009 - 06:33

golfdiesel
The Sigma 50-500 is quite a difficult beast to handle and it is easy to get blurred/unsharp pictures with it especially wide open at 300-500 mm it is very hard to handle because a fraction of a millimeter of movement at the camera end is a huge movement at the magnification level at those focal lengths.
But make absolutely sure that your 50-500 is in good order, there are some 'dodgy' examples out there. I had to return my first 50-500 to the shop to get a new one because it was completely out of order. I got a perfect focus confirmation from the camera but the images were all severly back focused by a huge margin.

Another thing, what is your definition of sharp? Do you look at a printed image or do you look at it on the PC/MAC at pixel level?
Do you shoot RAW or JPEG and which settings do you use?

More can be told after the examples are posted.

Comment by golfdiesel posted on unsharp images at 25/11/2009 - 06:27

golfdiesel
It seems that it is allso getting the ISO data from the camera, just tried a couple of shots between 100 and 6400 with the same aperture setting and the flash used a different output every time.
At ISO 100 it used the full output and at 6400 it operated at a tiny amount of light.

Comment by golfdiesel posted on What is the actual use of TTL and P-TTL? at 23/11/2009 - 22:39

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo