golfdiesel

Joined: 12th January 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

golfdiesel
Thanks for posting.
I have just flashed my 58 AF-1, was a very easy affair.

Comment by golfdiesel posted on Metz update 30-12-2009 at 05/01/2010 - 18:18

golfdiesel
comparing exposure on a shot is allmost impossible. Sometimes it looks the same to the eye but your camera can tell a completely different story.
When I use my Minolta exposure meter to give me the settings for my camera they are allmost spot on every time. The K20D does underexpose slightly but I have never found that to be a problem, yes it takes a little more time editing.

Comment by golfdiesel posted on Are DSLR's calibrated for exposure against a standard? at 04/01/2010 - 20:43

golfdiesel
The auto mode on Metz flashes seems to work very, very good.
It gives me much better results then P-TTL in the vast majority of the shots which I find quite strange actually.
A cheap and simple photocell does a much better job then a elaborate exposure system in an expensive DSLR...

Comment by golfdiesel posted on Ridiculous Flash Gun Prices... at 03/01/2010 - 15:12

golfdiesel
The prices for the Pentax units allso pushed me to Metz and it was the best decision I could make.
I opted for the Metz 58 AF-1 which is a great flash units. It is even built in Germany.
The only downside is the menu system which is a little difficult when you first start using it.

Pentax should stick with bodies and lenses, let the specialist companies handle the flash units...

Comment by golfdiesel posted on Ridiculous Flash Gun Prices... at 03/01/2010 - 12:33

golfdiesel
I use a SMC A 50 1.7 for product photography. Works like a treat and is very sharp.

small apertures and long exposure times are key when using natural light.
When using flash, try to use more then one flashgun and have a omnibounce or something attached to it so that the light isn't to harsh.

Comment by golfdiesel posted on Best lens for product photography? at 03/01/2010 - 00:28

golfdiesel
My first camera was a Agfa compact which used 126 film cartridges.
After that I got a Fuji 35mm compact. Which was replaced by a SLR a few years later.

Comment by golfdiesel posted on Your first camera at 31/12/2009 - 22:10

golfdiesel
A CRT is mostly better in terms of contrast ratios and colour accuracy.
A TFT usually has a higher light output. I currently have the brightness of my TFT set at 19% to achieve 120lm when calibrating the screen with my i1 display 2.

When buying a TFT you should look at the type of panel used. The best panels in terms of colour accuracy are IPS and PVA panels. TN panels are not as good and have a shallower viewing angle.
Most TN panels use dithering to achieve 8 bit colour depth per pixel because most of them are 6 bit panels. This dithering makes it harder to get a decent calibration done with a i1 or Spyder.

I assume that the brightness on the apple displays was just set higher. But I must say that the Apple displays are very good. Last week I was looking at a 30" CinemaDisplay and it was very good.

I have a NEC Multisync 20WGX2 Pro which is a 21" 16:10 widescreen display. This is the smalles that I currently would use. But size isn't everything, look at the resolution as well. My display is 1680x1050 which is a good resolution for a 21" display. I have allso seen 23" displays with the same resolution which are terrible to look at. For 23" and higher I would opt for a 1920x1200 panel.

Comment by golfdiesel posted on Monitors for photo work at 26/12/2009 - 11:35

golfdiesel
I have the version without the LED and it allso has a replaceable brush.

Comment by golfdiesel posted on Arctic Butterfly (Again) at 25/12/2009 - 12:17

golfdiesel
I will try it as well with my K20D and a Extreme III sdhc card.

Comment by golfdiesel posted on K20D Continous shooting and surprise... at 22/12/2009 - 11:37

golfdiesel
There is a difference between importing for purposes of reselling the items and buying something abroad as a private person.
When you buy stuff from outside the EU then you have to pay a duty.

The example from Levi's is a case in which the manufacturer has a problem with grey imports.
On the other hand VW was given a huge fine a couple of years ago when they were blocking grey imports within the EU.

Comment by golfdiesel posted on Grey Imports and what exactly is it? at 20/12/2009 - 16:04

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo