All Forum Comments
Comment by gfurm posted on K-3 II firmware bug? anyone else got it? at 26/07/2015 - 17:40
Thank you for contacting Ricoh Imaging.
In answer to your question about inability to use Green button for adjusting exposure in M mode when the aperture ring not set to A, we would like to advise you to check the following article which explaines how to use manual lenses on Pentax DSLRs:
http://www.pentaxforums.com/forums/54-pentax-lens-articles/110657-how-use-meter-...
We hope this article is helpful in your case.
If you are in need of further assistance, please respond to this email or call our technical support center.
Sincerely,
Ricoh Imaging Technical Support
I didn't have much hope that product specialist answer would be meaningful and they didn't dissapoint.
That's the reply I sent them:
Thank you for referring me to 5 year old article on unofficial Pentax forum with exact copy of what I send you in my previous email.
I does work like that using viewfinder but not live view. I worked correctly in viewfinder and live view on Pentax K-7 and K-5II I had before K-3II.
I’m astounded that Ricoh Imaging Technical Support has no access to Pentax K-3 II and a M lens to replicate the issue and has to look thorough internet to find an answer.
While we’re at pentaxforums.com let me share a link from there describing the same problem: http://www.pentaxforums.com/forums/172-pentax-k-3/299486-k-3-ii-manual-lens-live...
Sincerely
Greg
Comment by gfurm posted on K-3 II firmware bug? anyone else got it? at 26/07/2015 - 14:50
I've seen that option in RAW develop settings in camera but not as a shooting setting.
Comment by gfurm posted on K3 for scanning B&W film at 24/07/2015 - 15:01
For me the bottom line is: I don't have to look at 16MP or 24MP image at 100%, cropping is fine and doesn't degrade IQ if printed at normal sizes and ISO 3200 file from K-5II blown up to massive size still looks great.
I have few photos of my kids that are slightly out of focus when viewed at 100% but look OK on 5x7 print, so for this size pixel peeping doesn't really make sense.
Making large print opened my eyes to what my camera is capable of. I'm sure the photo I had printed at 30x40 was taken with 645z would have much more details but I'd probably not see the difference at comfortable distance.
Greg
Comment by gfurm posted on How much resolution do I really need? at 24/07/2015 - 14:32
Now back to topic question: It was printed from K-5II file cropped to 3x4 proportions. That means print was at about 109dpi, well short of the ultimate 300dpi print. Shot at ISO 3200, printed at 109dpi and I can still see fine details, eyes sharp, single strands of hair visible, good contrast and plenty of detail.
Being this big you're not really supposed to look at it from 10 inches but the quality and detail still blew me away. Sure, if you go at it with magnifying glass you'll probably find pixels but it's gonna hang on my wall when I manage to find affordable clip frame for it and it will look smashing.
That made me realise that I don't have to pixel peep for ultimate sharpness and that cropping half of 16MP file won't hurt print quality.
Greg
Comment by gfurm posted on How much resolution do I really need? at 23/07/2015 - 15:16
It's not a massive issue for me as I rarely use LV anyway. I just noticed that today playing with my Tamron 70-200 trying manual focus in LV with peaking. It's much less annoying with DA 15 or DA 35 due to smaller diaphram than Tamron so it doesn't make so much noise.
Comment by gfurm posted on K-3 Livewiev question at 20/07/2015 - 19:56
Thanks
Greg
Comment by gfurm posted on K-3 Livewiev question at 20/07/2015 - 18:44
Bottom photo got more scene on the left side than top photo. If viewfinder is 100% they should be the same. So is it 100% or not then?
Comment by gfurm posted on 100% view finder at 19/07/2015 - 13:10
Comment by gfurm posted on K-3 II firmware bug? anyone else got it? at 17/07/2015 - 16:09
Thank you for contacting Ricoh Imaging.
We have forwarded your case to our product specialists for investigation. They will test the camera in the same situation as you described.
After the testing is done we will get back to you with an advice.
If you are in need of further assistance, please respond to this email or call our technical support center.
Sincerely,
Ricoh Imaging Technical Support
They got product specialists. I wonder what will be their reply?
Comment by gfurm posted on K-3 II firmware bug? anyone else got it? at 17/07/2015 - 14:51

