All Forum Comments
Comment by Frogherder posted on Film processing for an idiot at 16/02/2012 - 11:31
regards
Bernard
Comment by Frogherder posted on One approach to being asked for payment... at 16/02/2012 - 11:26
Algi - The plastics man I went to see yesterday asked how many I wanted and happily was prepared to "play", to make me what I wanted. The machine uses heated steel dies which cost thousands to make so unless you need a few hundred thousand - I wouldn't bother.
The K10D and K5 batteries are different (at least mine are). The K10Ds is a bit like 2xAAs side by side with one flat surface and a groove on the top. The K5 is flat both sides.
Regards
Bernard
Comment by Frogherder posted on Plastic Batter Cover at 16/02/2012 - 11:17
Its a simple metal frame that sits in the filter mount that holds a slide away from the lens. The lens is spaced from thr body with (in this case 20mm) extension tube. It used to sit between the lens and extension tube (M42 clearance) but I cut the hole bigger this morning to 52mm where it is held in with a 52mm filter ring (sans glass).
Camera is mounted on a tripod and looks out into the sky for light (cloudy bright today). Slide is glossy side to the lens
[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP0160.jpg[/IMG]
Heres the 1st shot from a slide that must be early 80's (my filing is not too good)
[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP8519.jpg[/IMG]
It needs some work (also to the jpg, but it's not the best -I know) and IF I every plan on using the frame in anger I would rebuild it accordlingly to enable a closer view (get rid of the border)
regards
Bernard
Comment by Frogherder posted on Old Slides at 16/02/2012 - 11:06
I spent a short while making what I thought would be a suitable jig.
The came the task of melting some plastic and milk bottles cut up into small bits in a tin can seemed a good idea
Unfortunately even at 280deg C (the max our oven could produce) all I got was a sticky burnt toffee and a smell in the kitchen. Whilst milk bottle plastic apparently melts at about 150 dec C it still doesn't flow.
I did expected something like hot golden syrup that would pour easily.
Not to be deterred I contacted a local plastic moulding company for advise and arranged to go in and see them yesterday. They very kindly spent quite a while trying to help out. For the record, moulding machines work at 240 deg C, but inject at about 30,000psi (if I've remembered the details correctly) so hand filling a mound with hot plastic was always going to be difficult- However the following pics show the outcome.
Its yellow (thats the colour of the material they used) its stiffer than the clear K10D one because I made the female part a bit generous and its therefore thicker. Its a bit of a tight fit beause I hadn't taken into account shrinkage, but better tight than sloppy.
So all in all I'm a happy bunny
[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP8513.jpg[/IMG]
[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP8514.jpg[/IMG]
Bernard
Before anyone asks - no, I'm not taking orders
Comment by Frogherder posted on Plastic Batter Cover at 16/02/2012 - 10:04
....................as I understand LED light is very blue..............
It was with this understanding I was trying to suggest a reason for the blue cast on the slides
regards
Bernard
Comment by Frogherder posted on Old Slides at 14/02/2012 - 23:17
Did you note one syl word
Bernard
So does that acount for why I can't get on some of the special Dutch sites (only kidding)
Comment by Frogherder posted on Another pointless thread at 14/02/2012 - 15:56
I thought that as it was available on the website it was playable. It starts to for me then I have to wait several minutes to get the next minute or so, and so on. I can't be bothered to do that.
Bernard
Comment by Frogherder posted on Another pointless thread at 14/02/2012 - 15:34
http://www.itv.com/itvplayer/video/?Filter=307018
It gets you there, but my bandwidth is tooooooooo slooooooow to watch
There appears to be 3 episodes available, so I might have picked the wrong one
regards
Bernard
Comment by Frogherder posted on Another pointless thread at 14/02/2012 - 15:10
Makes a change from a ring flashed Nikon
Bernard
Comment by Frogherder posted on Another pointless thread at 14/02/2012 - 14:34


There is nothing onerous, difficult or mysterious about any aspect of it.
regards
Bernard
PS if you get into it big time you can (or could) buy big rools of film (I think 200ft was the norm) and rewind your old cassettes
B
Just checked - Ilford B&W and Kodak Colour materials still available in 30.5 meter rolls, thats roughly 800 exposures worth