All Forum Comments
Comment by Frogherder posted on Ansell Adams 110th birthday at 20/02/2012 - 15:39
Now there's a job for someone.
Bernard
Perhaps they just do it part time to keep their hand in
Comment by Frogherder posted on Another pointless thread at 20/02/2012 - 15:35
1 green bit on the right; 2 green arrows, fluctuating to 1 yellow bit high.
Test conducted on a smooth level table & turning the camera through 180 deg.
There doesn't appear to be many natural horizontals/verticals around here, so I don't think anyone will notice. If they do, I don't really care
Bernard
Comment by Frogherder posted on K5 - Electronic Level Adjustment?? at 20/02/2012 - 15:28
Sorry no practical suggestions.
Bernard
Comment by Frogherder posted on K5 lens calibration shifting? at 20/02/2012 - 15:18
These "nuts" are probably easily available as a spare part, because I, for one, nearly discarded mine
regards
Bernard
Comment by Frogherder posted on non removable tripod head? at 20/02/2012 - 12:21
No one has mentioned yet that the lens needs to have a manual aperture adjustment. The M50/1.7 provides this and for that matter manual focus but you will lose all the automatic facilities that your camera provides. Metering, whilst (at least on my cameras) works moderately well, it's not quite as accurate as I'd like. Take a test shot first and adjust shutter/ISO accordingly
Regards
Bernard
Comment by Frogherder posted on Reverse lens for macro photography at 20/02/2012 - 12:06
Regarding the reverse lens options, at this moment I simply want to reverse the 55mm lens onto the mount and not onto another lens. So looks like I need a 49mm/52mm converter
To reverse the lens to fit directly to the camera you will need a K mount on one side and your filter size (eg 55mm) on the other.
49/52 would be used to reverse a lens in front of a camera mounted lens
Following photo shows both. To reverse the lens onto the camera you need the bottom one
[IMG]http://i1236.photobucket.com/albums/ff444/Frogherder/IMGP0218-1.jpg[/IMG]
regards
Bernard
Comment by Frogherder posted on Reverse lens for macro photography at 20/02/2012 - 11:53
And as you say the subject is vast.
regards
Bernard
Comment by Frogherder posted on Reverse lens for macro photography at 20/02/2012 - 10:10
The basis is that you need a ring which has two male threads which fit into the filter threads of the two lenses you opt to use, so you will need to look for, for example 52/49mm; 52/52mm; 52/55mm, depending on the lens combinations (there are also itens such as step up and step down rings, which have a male/female of different sizes, that when used in combination with a reversing ring (of the wrong initial match) would help)
Ebay is possibly your best source for all of the above (you can generally ignor references to Canon/Nikon in this instance as you're only interested in the filter thread sizes)
I personally find I get vignetting using this mode, unless I fit a longer lens near the camera and a shorter lens outboard, so have yet to be satisfied with the results.
It was felt (and probably still is) that an optimum length for a portrait lens on a 35mm film camera was about 90-100mm.
On digital, allowing for a reduced sensor size, this equates to circa 60-70mm focal length (see other threads for discussions/arguments on digital/film focal lengths).
Much depends on the style of portrait that you want to do. If we momentarily flit over to bird photography you'll find some will have taken a birds "portrait" with maybe a 500mm lens, others have used 50mm. Neither is wrong, per say, but different.
I've started taking pics (yet to be defined as portraits) of my grand children. Some are using 35mm or less, because I can't get far enough away from them. Outside I often use a short telephoto because I don't want to intrude.
regards
Bernard
Edit,
In the time it took me to type my post, one of the site experts has provided you with a better answer -B
Comment by Frogherder posted on Reverse lens for macro photography at 20/02/2012 - 09:27
Uncoated bronze was used as the base standard as there is a vast amount of data available for this material in salt water. Results were then pro-rata-ed (is this a word, if not I claim first printed use) to arrive at an expected life when fitted to a vehicle.
Unfortunately if we'd had to wait the "life time" period then Ford Escorts and Morris Marinas would just about be coming off the assembly line, But they'd last much longer
Bernard
Comment by Frogherder posted on Another pointless thread at 20/02/2012 - 08:57


Bernard