All Forum Comments
Comment by DoctorJeff posted on The Death of the Camera Shop at 05/11/2010 - 22:56
techno-terminator wrote:
Actually I'm really annoyed with myself - these looked far better in the camera than they do now.
Oh I know that feeling all too well. That monitor on the back of the camera LIES!
I had this fantastic shot of the inner harbour at Cherbourg (at night). It was my first trip out after getting the K200.
The fantastic shot lasted until I got home and put it on the big screen. Then it became a binned shot.
Now I always check each shot on the monitor using the Zoom feature as a quick check on "Have I Done It Wrong?"
Geoff
Comment by DoctorJeff posted on from tonight at 04/11/2010 - 09:42
Of course, none of them (two PCs and two Macs) are brand new, and the operating systems are not brand new, but the boot times are faster with the Macs. Cannot see any difference when photo-editing, but the comparison is not fair (450 mhz Mac versus 2.4 Ghz PC), and I use a PC for convenience.
Go back 20 years or so, and every psychologist involved in vision research ran a Mac, because they were far superior to the PCs of the day for displaying graphic images. In fact it was almost impossible to even find experimental software for the PC.
YGMMV
Geoff
Comment by DoctorJeff posted on PC OR MAC ? at 01/11/2010 - 08:50
18% gray was the old standard setting for light meters - and I speak of the 1950s and '60s, and your photographer then would meter off an 18% gray card at the subject position. That is, he/she measured the reflectance from the test card at the subject position.
RG&B all set to 118 would have produced the equivalent of 18% gray on a CRT monitor - provided that monitor had been powered up for at least 1 hour. The RGB values refer directly to the colour gun settings for the RGB monitor. Hence, any measurement is of the luminance of the screen. There are - of course - no colour guns in a flat panel display (and I believe that they stabilise, in colour terms, far quicker, but I have not done any tests).
What the human eye "sees" when looking at a monitor - any monitor - depends on the ambient light in the environment in which they view that monitor. In other words, the luminance of the image is moderated by the reflectance of the screen.
Way back (yes, the '50s/'60s again) your amateur tended to find a combination of film and meter settings that worked for them - and stuck with them. Now, of course, we are spoiled for choice in the fine tuning we can do (and maybe we do too much).
Geoff
Comment by DoctorJeff posted on Newer sensors worse results? (open letter) at 31/10/2010 - 20:53
The eb*y seller does not say what the filter size is. Some large filters are common sizes and cheap - some are rare sizes and a filter will cost you more than the lens. Ask him quickly and check.
The ad is a touch odd. It says T2 mount and T mount (and original T mounts are very hard to find - not threaded, BTW) and gives the lens type as a zoom. I see that the seller is offering an Olympus OM T2 mount and rear cap, so its a good guess that this came off the Albinar lens.
I would check the filter size though.
Geoff
Comment by DoctorJeff posted on 500mm and a converter? What are the pitfalls if any? at 30/10/2010 - 10:47
SmutjeUK wrote:
Thank you for your kind answer but aren't we in the wrong thread for that as this thread is about the 500mm lens and the x2 converter.
T2 mount is not M42 lens fitting (M42x1), it is M42 T2-fitting (M42x.75).
Easiest combination is a T2-to-K mount adapter; then you can use a 2X K-mount converter between that and the camera body. But, be warned:
Manual focussing will be a total pain given that you will get the effect of a very small aperture. Even at infinity, you could well find that the 500mm lens turns beyond the oo setting and does not give you true infinity, unless you can see to focus it.
You do not say where you are - but if it's anywhere near me, this is easier to show than to explain.
Geoff
Comment by DoctorJeff posted on 500mm and a converter? What are the pitfalls if any? at 29/10/2010 - 23:29
So was this very recent thread:
https://www.pentaxuser.com/forum/topic/high-iso-with-k7-23384
Looks like we should all spend a lot more time learning to use our new toys fully, so that we can turn them into new tools.
Geoff
Comment by DoctorJeff posted on Newer sensors worse results? (open letter) at 28/10/2010 - 10:30
You cannot compare Aero's quick shots with those from the other forum. The "stack of books" shot is not lacking in "vibrancy" - whatever that is - and does clearly show that the lens is GOOD.
Probably, the way to a fair test is a more organised series of shots doing a set of like-for-like images with a kit lens set to the same focal length. I assume 30mm from the body text, not the heading.
If one looks at the images on the other forum there is a B&W shot that shows an unfortunate green cast in a lot of places. I don't know whether that is the lens, the body, the processing inside the body, or PP in a graphics program (doing a Colour-to-Mono conversion). I could blame the lens used - but without any supporting evidence that would be meaningless.
Comment by DoctorJeff posted on Early test of 35 f2.4 at 27/10/2010 - 10:36
The AA cells are 2100 maH, and are less than £3 for 4.
Usual disclaimer.
Geoff
Comment by DoctorJeff posted on Leaky battery at 25/10/2010 - 14:37
How about a rubber hood. If you get vignetting, then you could just cut round back of the rim to shorten the hood.
Geoff
Comment by DoctorJeff posted on Replacing A Lost Hood at 23/10/2010 - 14:47


Fielders. Sevenoaks – Closed down
I think that the rot started back in the 1950s. A wonderful shop in Week St, Maidstone, was taken over by a firm called Dixons. The used equipment side was cut back to almost nothing, and we know what happened to Dixons more recently.
Shops have to make enough gross profit to pay the overheads, and only then can the owners take something for themselves. A local owner does not need a manager, and the manager is part of the overhead.
Those shops that survive, are thos that provide some service that the local customers value. There are (well, 12 months ago) shops in Bath and Swindon, Witney, Newbury, and Wells, but the ones in Devizes, and Chippenham have gone, and one in Warminster concentrates on wedding photography. There is still a Pentax dealer in Trowbridge, but used equipment is a rarity there. The same thing happened to TV dealers.
Geoff