DoctorJeff

Joined: 12th January 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

DoctorJeff
Gush on, fellow MZ50 owner! I do not intend to part with mine.
But I now have more lenses to try on it - and that could be fun.
Geoff

Comment by DoctorJeff posted on I'm really enjoying my MZ-50 & DA 35mm 2.4AL at 17/08/2011 - 09:44

DoctorJeff
The big question could be where has the screw come from?
A lot of mounts come off quite easily - provided you don't pull the aperture ring off as well (tiny springs, tiny balls ... oh "bother" :blush but to find where the screw has come from you may have to go deeper, and that coud be a tricky job - and one for an expert.

If you can see the screw, a tiny bit of "BluTack" on the end of a bit of stiff copper wire can maybe fish it out, or maybe a magnetised screwdriver will get it. Then put the screw somewhere safe against the day when more drastic treatment is needed.

Figure: if the value of the lens is more than the cost of repair - leave it to a professional. If the valueof the lens is less than the cost of repair, AND you are prepared to scrap it if things go wrong, then have a go yourself. But if you can get the screw out without screwing something else up, then just carry on using it.
Geoff

Comment by DoctorJeff posted on Pentax F 70-210 with a screw loose at 17/08/2011 - 09:41

DoctorJeff
timcx500e wrote:
Would you believe ive mislaid the battery charger for the k20 .
regards, tim.
Yes, it can be really frustrating when you cannot find something (voice of experience). Cannot help with a charger, but can offer this suggestion:

Don't try and think where you put it - try and picture where you last saw it. Quite often this can get you looking in the right place.
Geoff

Comment by DoctorJeff posted on Wanted: K10/20d Battery Charger at 14/08/2011 - 10:02

DoctorJeff
Anvh wrote:
DoctorJeff wrote:
Put (say) a small paper sample against a large white area on the screen, and each will have an effect on the perceived luminance of the other. Then, how will this help with an image that has no white at all?
Geoff
It's not so hard to create a white image you know
Just make it full screen and adjust.
it's about that the white of the monitor match the white of the paper not that the white of the image is the same with the paper.

And indeed you can't have it match 100% but this the only way to get close though.
I think that you have rather missed my point, Stefan.
Yes, creating a full-screen white image is easy - takes just a few seconds (and you can do this in Powerpoint, even). To compare this to a sheet of paper - whether is is a small sample or a large sheet - is not so easy. The human visual system will evaluate each white area in terms of the perception of the other area. The paper white can only be adjusted by altering the ambient light, but the screen can be altered with a mouse click or two. And, whichever you change, the phenomena of colour constancy will also affect your judgement. You can read some of this in the (excellent) Northlight article that you cited.
Geoff

Comment by DoctorJeff posted on Monitor image vs. new printer at 10/08/2011 - 23:24

DoctorJeff
Anvh wrote:
Has to do with the brightness level and with a monitor you're looking into a light source while a paper merely reflect it.
You can hold the paper next to the screen and then adjust the brigthness till the white on the monitor matches the paper.
That might help - except that paper will only reflect the ambient light. The monitor will both reflect the ambient light and function as an emitter. Ambient light can have a big bearing on the human perception of the monitor display. Change the size of the illuminated area, or the emitting area and you will change the perception of its brightness (or luminance); change the luminance and you will change the perception of its size. Each has an influence on the perceived distance of the area.

Put (say) a small paper sample against a large white area on the screen, and each will have an effect on the perceived luminance of the other. Then, how will this help with an image that has no white at all?
Geoff

Comment by DoctorJeff posted on Monitor image vs. new printer at 10/08/2011 - 13:45

DoctorJeff
I found this when I changed from an 17" Flatron to a 22" Flatron monitor, with no other changes in kit. Then I changed PCs, did the monitor calibration thing, and the first printout is still way too dark. The next thing is to go back to the 17" (now on my wife's PC), and see what happens.

Geoff

Comment by DoctorJeff posted on Monitor image vs. new printer at 09/08/2011 - 23:33

DoctorJeff
Mannesty wrote:
DoctorJeff wrote:
My PhD Thesis was written using WordPerfect and saved onto a 1.2/5.25 floppy.
I bet you're glad you didn't have to carve it onto a stone tablet.
One of the Senior Lecturers at that time had written his Thesis on a rubber-keyed Spectrum. I think that must be nearly as bad.

Comment by DoctorJeff posted on Archive Storage - RAW vs JPEG at 08/08/2011 - 18:54

DoctorJeff
At one time I backed up onto floppy disk.
Then I backed up anto Zip disk.
Then I backed up onto CD.
Now it should be DVD or an external Hard Drive.

Just remember that to storage media is totally reliable so you need to renew the backup (and do it onto more modern media).

My PhD Thesis was written using WordPerfect and saved onto a 1.2/5.25 floppy. Then onto a 1.4/3.5 floppy, then onto CD. I still have computers that will read the older media, but inevitably they will die and I might have to convert from WP. Saving in RAW (whatever flavour) does offer a chance that at some time in the future you can still read the files.

Geoff

Comment by DoctorJeff posted on Archive Storage - RAW vs JPEG at 08/08/2011 - 14:47

DoctorJeff
I think that most of the named bodies were made by either Cosina or Chinon, with the addition of Tokina for several brands of lens.
Geoff

Comment by DoctorJeff posted on Cameras with K mount at 08/08/2011 - 14:36

DoctorJeff
Open a recent file.
Scroll down to "Manufacturer notes"
Look for "Shutter count" - this should be just below the fourth underline.
Geoff

Comment by DoctorJeff posted on 2 x Samsung GX20 SBG-D1V grip for sale at 04/08/2011 - 17:57

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo