All Forum Comments
Comment by DoctorJeff posted on WOT?? at 04/08/2011 - 17:52
- It is easier for the human eye to read dark print on a light background, than the reverse.
- Some typefaces are easier to read than others - we ran a survey a few years back and Tahoma came out on top.
- Keep away from red/green and blue/yellow combinations if you can - avoids most color-blindness problems.
- Think of the left handed user. Menus across the top of the screen or down the centre, will suit all. But you can make the virtual buttons wide enough to cover the centre if you really want a left-justified setup.
- Test the website for speed of loading - most viewers will wait no longer that 8 seconds for a page to load, unless they know it has something they want.
- Test the website on at least four browsers (Explorer, Firefox, Opera and Safari). It should look the way that you want it to on all of them.
Geoff
Comment by DoctorJeff posted on Getting my own business website, any tips. at 27/07/2011 - 23:25
More than 30 years back, a friend went to an arms auction, and bid on an excellent example of a blunderbuss by a very good maker. It should have fetched around £450. He bid the price up (maybe with the aid of a friend) and got the blunderbuss for £900. He already had a mediocre example of the same thing by the same maker. His words to me when he was showing me the new acquisition were:
"Now I've established that one of these is worth £900, I can sell the scruffy one in a few months and get most of my money back - and have a really good one for a scruffy price"
So, a genuine bidder may not always want to buy as cheap as possible.
I just figure that ebay are in business to make money for ebay, and anything that they do is with that in mind.
Geoff
Comment by DoctorJeff posted on eBay madness at 27/07/2011 - 10:32
If you find it hard to decide on the maximum amount you'd be prepared to pay, think of it this way - what's the lowest amount you definitely would NOT be prepared to pay? Got it? Okay, bid a penny less than that. Not a pound, not ten pence, just ONE penny. Remember than unless another bidder is prepared to match you pretty closely (or outbid you) the likelihood is you will not end up paying as much as your maximum bid.
I was once (many years back) at a farm auction and there was this Czech single barrel 12 bore shotgun with a split in the stock. I was doing woodwork for guns at the time, so that did not worry me. I set a maximum in my mind of £10 pounds. I never even got to bid. The price went past £10 so fast it was eyewatering, and stopped at over £30. The punch line is that the new price of that gun at the time was £12.50.
Geoff
Comment by DoctorJeff posted on eBay madness at 24/07/2011 - 21:25
Perhaps users and manufacturers were just getting used to DX when the camera was introduced?
I looked up the manual for the A3 on Mike Butkus' site and this looks exactly right. It refers to Non-DX and DX films. Since it was "auto-only", (not quite since it had a 1/60th for flash, and a Bulb setting) it should really be considered as a crossover between an SLR and a compact of that era.
Looks like fun anyway.
Geoff
Comment by DoctorJeff posted on film ASA at 20/07/2011 - 11:45
If you vary the setting, and/or treat the film as something else, it is a good idea to tell the processor that you have done this and "please don't apply any compensation - I'm testing a new body/lens/etc".
For DX info:
http://en.wikipedia.org/wiki/DX_encoding#DX_cartridge_barcode
Geoff
Comment by DoctorJeff posted on film ASA at 20/07/2011 - 10:20
He's talking about KM lenses not M42. A KM is stopped down by default so by removing the pin it's always at say f/5.6 (or it can be changed on the camera) which would allow Av mode to work.
I knew someone who had a faulty K10D that didn't work properly because the mechanism that open/closes the lens didn't work. The camera worked fine with KM lenses in Av mode.
Buy some old obsolete 'K' series lenses and cut all the pins off!!
We do seem to have a terminology problem. To me, a pin is circular in section and moves (or is moved) along its length. If it's flat and moves on a different axis, then it's a lever. :
So: I open the bag, take out the K20D, dig in the bottom and find my SMC-M K-mount 1:1.4 50mm and I can only see a lever operating the diaphragm.The lens is stopped down, mounting it causes the lever to move on a path around the lens mount, and open the diaphragm.
If what I call a lever is what you call a pin - then there is no way I would ever normally consider cutting it.
1. The lens is now non-standard.
2. Cutting without dismantling carries a risk of particles getting into the lens.
2. Dismantling to cut might affect some other part of the internal mechanism.
The only time I might consider doing that sort of work on a lens is if something else had been damaged (say the filter ring) and it was already effectively worthless.
If there is a K-mount lens with a pin in my terminology, can you give me a URL where I can see what it looks like, please.
Geoff
Comment by DoctorJeff posted on k to manual mode for dslr at 19/07/2011 - 12:51
The pin pushes on the linkage that allows the iris to shut down to the selected aperture. Cutting the pin means that the iris will never stop down, surely?
I have just modified a 135mm f2.8 Hoya to allow its use with an M42 to K-mount adapter. This was a simple job. Remove the back ring carrying the pin and it's linkage, press the pin in, and slip a spacer round it on the inside of the ring, reassemble. The spacer was a length of insulation from a piece of solid-core electrical cable that I just happened to have. Cut to the correct length and then slit lengthways to allow it to slip round the pin.
Note that the optical elements were not touched, there was no damage to the mechanical parts, and the process is reversible in less than five minutes.
AFAIK, the only lens mount where one should even consider actually attacking the metal is one of the Ricoh variants of the K-mount, where you do not want it to jamb on the body.
BTW cardiff_gareth offered an M42-K adapter only a few days ago with an inner flange that kept the pin depressed. It would be better to look for another one of these than to ruin a lot (or even any) of good M42 glass.
Geoff
Comment by DoctorJeff posted on k to manual mode for dslr at 19/07/2011 - 10:02
Geoff
Comment by DoctorJeff posted on FS - Pentax D-BG2 Battery grip for K10d and k20d - Reduced price at 18/07/2011 - 09:43
geoff
Comment by DoctorJeff posted on Instrument help at 13/07/2011 - 10:09


Maybe they just don't have anyone who can value this sort of kit properly.
In one of our local charity shops, a few years back, there was a 135/f3.5 tele lens by one of the not-very-distinguished makers at £39.95. I looked at it, saw it was a K-mount, and put it back. The assistant did ask if I was interested, and I said yes - if the price was reduced by about £30.
The comment was that the price had been set by "our valuer". This could be why the lens sat in the showcase for the next six months.
In the US, the Goodwill Industries chain of Thrift Shops operate their own auctions.
Geoff