DoctorJeff

Joined: 12th January 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

DoctorJeff
Further to my post above (26-9-11).
Both the 7dayshop remote releases do give autofocus just before release.
This is on my K20D and on the K7 belonging to chrisinkpen.
Comparing the wired remote with both the genuine Pentax one, and an"e-bay special" that Chris bought, suggests that the Pentax release is visibly of better quality, with the 7dayshop release being better than the e-bay one.
The 7dayshop release does have a longer cable than the others - and this could matter if one is trying not to be seen by birds.
Geoff

Comment by DoctorJeff posted on SHUTTER RELEASE will it work at 30/09/2011 - 09:05

DoctorJeff
Algernon wrote:
The 82mm diam. filter on the Tamron 500mm was part of the design
and actually improved it's sharpness
Mebbe so, but I don't have a Tamron. And, some mirror lenses (including at least one Tamron, I think) had a rear filter system that was part of the optical design, and had to be used.

Quote:
It's just a myth that filters reduce sharpness. Some filters
actually improve it particularly at the edge of the frame


Actually, it is not a myth. I have just tried my Hanimex 500mm on my K20D, with, and without, the 1B filter. The target was some carved stonework on a house across the road, and the difference is dramatic. Even hand-held, the "filter off" shot is so much sharper.
Subject to another trial, it looks like I will keep the Hanimex and sell the filter.
Geoff

Comment by DoctorJeff posted on Focus Issues with 55-300mm and Circular Polariser at 28/09/2011 - 11:46

DoctorJeff
Bit of a digression, I know, but following this thread did make me think.
I have an old Hanimex 500mm mirror lens (original T-mount in Pentax-K) that has never seemed to be quite sharp. It came with a Hoya 72mm 1B filter, which has never been removed.
This thread does suggest that I should try the lens without the filter.
if things improve, this could turn a "Maybe" into a "Keeper".
Geoff

Comment by DoctorJeff posted on Focus Issues with 55-300mm and Circular Polariser at 28/09/2011 - 10:34

DoctorJeff
Quote:
K10D wrote:
So I guess that you won't be a regular visitor then?
Of that, you can be sure!

If I were marking that as an undergraduate project, it would only just have scraped a pass.

But seriously, I can imagine that the site will attract a lot of visitors, once. There is not enough data to make a real difference on a buying decision - but no doubt some people will visit a second time if they are wavering between two models, and want another reference point.

Or, look at it another way:
If the shutter on model X is a shutter that has a few recorded failures at around the 40,000 mark, that would not even be worth considering, for me - since that is about 15 years use, for me. For a pro taking 40-50,000 shots a year, the warranty length could be far more important. For either of us, the reliability of the electronics might well be a much bigger factor. Just think how many people have reported shutter failures here, as opposed to sensor staining.

Geoff

Comment by DoctorJeff posted on Shutter life at 28/09/2011 - 10:20

DoctorJeff
I tried a few crops. None of them looked quite right to me (so Im not posting any of them). For me, the question is "What happened to the river?".

The last time I saw water like that was in a (computer-generated) simulation. I think, if the still water under the bridge was clone-stamped to replace the unreal (to my eyes) looking ripples, then the cropping would be a different exercise. Perhaps, this was one of the times when a polariser would have made a difference

Personally, I would hate to see the shallow water, and the moss covered boulder, go from the left hand side.
Geoff

Comment by DoctorJeff posted on Pano Fail at 28/09/2011 - 09:50

DoctorJeff
johnriley wrote:
It is interesting, but as the failure rate is based on only one negative result maybe it needs a larger sample.
Now that was being nice, John.

Father Ted wrote:
To be honest, statistically I don't think that gives any useful information.
I would be inclined to call that site a waste of bandwidth:

- The sample size is way too small.
- All the data is user reported.
- No indication of the total production run is given.
- There is no indication of the conditions under which each shutter was used (think single shot compared to all multiple exposures).
- There was no climatic or temperature data.

One could take all the data for each model, and work out the standard deviation as well as the average - and then have some slightly more useful values.

And, if you really want to see the value of that database, look at the figures for the SD9 Sigma - a sample size of 13, of which two appear to be the same camera (and are certainly the same person reporting). I find it hard to believe that two samples should each fail at exactly 65278 actuations in the same pair of hands. Not impossible, just very hard!

Geoff

Comment by DoctorJeff posted on Shutter life at 27/09/2011 - 17:56

DoctorJeff
Quote:
Cheers Geoff, let us now how the wireless works
And the answer is that it works, straight from the box.
BUT
It only does the shutter release.

Half pressure fires the shutter, and there is nothing left for full pressure to do. In theory, the units have 16 channels available; in practice, the switches to set them are under a clear plastic cover - you can see that they are the same setting, but you can't change it.

The 7dayshop infrared is something I have not got to work, yet, This may be due to my test surroundings being dark enough to need the flash, or it may just not be any good. Still, I have had enough trouble setting up infrared on computers and printers to know that it is not a very exact science. Time will tell whether I wasted nearly three whole £££.
Geoff

Comment by DoctorJeff posted on SHUTTER RELEASE will it work at 26/09/2011 - 17:29

DoctorJeff
My 7dayshop remote arrived just a few minutes ago.
It works.
The button is very sensitive when trying to do the half-press to focus, and it seems too easy to go straight through to the full release. This could be just me, and I think I will also try the mod to a spare cable switch F as in featured in Digicaminfo.
The sensitivity does not worry me, as it will likely be used with long manual lenses, prefocussed on a bird feeder (or similar things).
I will be trying the wireless remote out later.
Geoff

Comment by DoctorJeff posted on SHUTTER RELEASE will it work at 26/09/2011 - 13:08

DoctorJeff
[quote:3496ace15f="nipper"]Does anybody know if this will work on k5 :

]http://www.7dayshop.com/catalog/product_info.php?cPath=777_1&products_id=111932[...

Ask me this question in a day or two.
I have one on order (along with their wireless remote) and it should arrive tomorrow or Tuesday. I think that any body with a 2.5mm stereo socket should be OK - mine is for a K20D.
If there is a problem, then I can use it to adapt a spare "F switch", so it had to be worth a punt.
Geoff

Comment by DoctorJeff posted on SHUTTER RELEASE will it work at 25/09/2011 - 15:51

DoctorJeff
Never tried one!
But, looking at the website, it's easy to se what they are about.
Discounts!!
Buy these extra CDs!!
If what you learn is worth more to you than what you pay to learn it - go for it.
I would rather have a good piece of software + a good book and then find out what I want to do and read how to do it in my own time. But then, I am used to "reading the manual"; others may learn better from being shown how to do it.
Geoff

Comment by DoctorJeff posted on Topaz webinar. at 21/09/2011 - 10:08

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo