All Forum Comments
Comment by DoctorJeff posted on computer problem. at 13/12/2011 - 22:32
I normally inspect my lenses with a 9-LED torch (I have a handfull of these all over the house) and from some angles, on some lenses, there does seem to be a pattern of small coloured spots on some internal elements.
Off-hand, 'cos there is no way to measure them, the spots look to be about 1/4 the size of one of the LEDs.
If your spots are smaller, then this is probably not the same effect. What you could try is to hold the torch further from the front or rear element, and see if it makes a difference. Then part close the diaphragm and see if the spots are in front of, or behind it. When you have determined where the spots are, shine the torch from the other end and repeat the test to see if they are still in the same place.
This may help you determine if it is your technique, or the lens that is spotty.
Geoff
Comment by DoctorJeff posted on Sigma 400mm APO Manual Focus len - enquiry. at 13/12/2011 - 10:35
Better that you make a copy, and work/experiment on the copy. You may end up with things that you do not like afterward, but you will evolve your own style of work.
Just remember to [Save As] after each session - so that you have the original and a copy of the original.
You have tried B&W, now try a Sepia tint (or a Blue one), and play with the brightness, or the dodge and burn; but above all, have fun!
Geoff
Comment by DoctorJeff posted on Wardrobe foorhandle at 09/12/2011 - 09:37
Also, think about a crop of either the left or right side (probably right) to move the fancy metalwork off-centre.
No reason why it should not be a tall and narrow image, is there?
Geoff
Comment by DoctorJeff posted on Wardrobe foorhandle at 08/12/2011 - 09:39
Geoff
Comment by DoctorJeff posted on Gallery pop-up - I4s Winner? at 07/12/2011 - 10:14
Geoff
Comment by DoctorJeff posted on Pentax SMC A 50mm F2 Information please at 05/12/2011 - 17:55
They look similar to the Aputure ones.
I believe that the IR remotes can only be used from in-front or behind the camera, and not from any angle at all.
Might be worth contacting Aputure direct - while you can still get low-value items in free of duty.
Geoff
Comment by DoctorJeff posted on remote or cable release for K5 at 02/12/2011 - 11:14
Wireless remote, or cable remote, each for under a tenner just a few weeks back - both work fine.
Tried their el-cheepo IR remote - rude word.
That's the way the biscuit breaks!
Geoff
Comment by DoctorJeff posted on remote or cable release for K5 at 30/11/2011 - 23:29
Typeface size is a bit subjective, but a lot of people (like me) can and will zoom in on the scroll wheel. But I could read it "as is", and anyone with younger/better eyes should have no trouble at all.
Congrats on a great site.
Geoff
Comment by DoctorJeff posted on Looking for feedback on my website please! at 30/11/2011 - 10:22
Your keyboard seems to be infected!
OK, joke time over. I went through a spell when I let up on the shift key just a moment before I hit the letter key. Now, thanks to my MS, I make some rediculous typos. It really hurts when you intend to type (say) a "t" and you watch your finger descend on the "j" key - and can not stop that finger from moving.
Geoff
Comment by DoctorJeff posted on Gallery pop-up - I4s Winner? at 28/11/2011 - 22:29


Turn the monitor on first. If it gets power from the PC, use a separate power lead. Now switch the computer on and look for an opening screen that tells you which key to press for setup. Note that the key varies with the MB maker. When you get the setup screen, work across the menus until you find the one for the boot disk. Now make sure that it is trying to boot from the hard disk (Drive C) and not from (say) a CD drive. If this is all good, then you can suspect other things.
My next look would be at the battery that maintains the setup record - if this is dead, then there is nothing to tell the machine where to boot from. it is usually a coin cell, typically a CR 2032, and easy/cheap to source.
Geoff