All Forum Comments
Comment by davidaitch posted on Safe to use? at 15/08/2011 - 12:16
Thanks to all of you for the advice.
I'll test it with a voltmeter as soon as I can get access, just to be safe.
Dave.
I'll test it with a voltmeter as soon as I can get access, just to be safe.
Dave.
Comment by davidaitch posted on Safe to use? at 09/08/2011 - 17:07
I have an Achiever 632LCD (Cobra D650?) which I quite happily used for film. Can I safely use this again with my K200D & K20D.I know that I'll probably have to use it in manual only but it does give from full to 1/16th power which I did find great for fill-in with film.
Will trigger voltage be a problem?
I very rarely use flash and don't want the expense of buying a P-TTL gun.
Will trigger voltage be a problem?
I very rarely use flash and don't want the expense of buying a P-TTL gun.
Comment by davidaitch posted on Safe to use? at 09/08/2011 - 13:09
Hi, and welcome to the forum
Dave.
Dave.
Comment by davidaitch posted on Hello at 23/06/2011 - 19:30
Thanks, Guys,
And just in case the post about John sending a limited lens is correct, I've just programmed my computer to churn out a load of spam to be equally divided among all forum subjects.
By this time next year(to quote my favourite TV show) I'll be a millionaire.
And just in case the post about John sending a limited lens is correct, I've just programmed my computer to churn out a load of spam to be equally divided among all forum subjects.
By this time next year(to quote my favourite TV show) I'll be a millionaire.
Comment by davidaitch posted on Forum Classifications at 31/05/2011 - 15:39
Just to satisfy my curiosity, what's the difference in the various members subtitles e.g. Site Veteran, Master, pro-master, etc?
Comment by davidaitch posted on Forum Classifications at 31/05/2011 - 13:33
Anywhere along the Galloway coast. Follow the road from Rockcliffe to Kippford and points West Spend a bit of time in Glentrool.
Comment by davidaitch posted on Help for Scotland at 26/05/2011 - 20:05
Anvh wrote:
A lot of the communication is lost by just writing and i forget that sometimes
David, any luck so far or do you still have this problem?
Stefan, Don't know what I've done(apart from being stupid and not noticing the settings were 3 under) but I did update the firmware, made the correct choice of settings, replace the card and it all came together.A lot of the communication is lost by just writing and i forget that sometimes
David, any luck so far or do you still have this problem?
I even played safe and bought a 20D from Simonkit in case it happens again on something important.
Many thanks to all you guys for the help and suggestions.
All I have to do now is justify to my wife the need for "another b****y camera"
Dave.
Comment by davidaitch posted on Any Ideas? at 21/05/2011 - 12:43
Camera arrived safely this morning exactly as described.
Just waiting for the battery to charge and the rain to stop.
Thanks, Simon.
Dave.
Just waiting for the battery to charge and the rain to stop.
Thanks, Simon.
Dave.
Comment by davidaitch posted on FS: Pentax K20D (Body Only) at 21/05/2011 - 10:50
O.K. Geoff, Downloaded but not used. I'll get Gwyn's download and use that. I'm still on v1.0
Mike, the cards came from 7 Day Shop.I've never had a problem with their offerings before. As I said, the cards did record, just couldn't understand why the error message came up after so many exposures and I had reviewed some, if not most, of them.
Mike, the cards came from 7 Day Shop.I've never had a problem with their offerings before. As I said, the cards did record, just couldn't understand why the error message came up after so many exposures and I had reviewed some, if not most, of them.
Comment by davidaitch posted on Any Ideas? at 20/05/2011 - 13:57
Dave.