Anvh

Joined: 4th July 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Anvh
amoringello wrote:
Which OS?
Windows 7 may be able to handle that without having two independent video cards.
Windows XP defnitely cannot. Even with the color power toy, allowing calibration of two monitors, the color will only hold for a few hours, then go wonky again.
Windows 7 ultimate & one AMD 6850

amoringello wrote:
You're going to need to tune that LCD brightness down to, I believe 60-80, to match the CRT. (I think it was on "The Grid Live" podcast they just mentioned this sort of issue with brightness differences even though calibration is otherwise "equal").
The software probably puts the LCD at 100-120 by default. LCDs by from the factory are probably more around 200, i.e. excessively bright.
I set my iMac down to about 100 and the other LCD monitor to about 110 and the match is almost exact.
Brightness for both are set to 125 that is 32% of the EIZO and 75% of the LCD.
The Spyder3 does a check of the luminance of the surroundings and adapt for that.
So brightness are the same, kelvins are the same and both calibrated by the same device and in the same lighting.

amoringello wrote:
If the LCD is TFT, you're likely not to get color accuracy. But you seem to have that covered.
All LCD are TFT
I think you mean the type of pattern of the screen.
TN are no good but in the Eizo sit a S-PVA.

Comment by Anvh posted on Calibration 2 monitors at 25/07/2011 - 22:49

Anvh
Algernon wrote:
I've never heard that one Stefan?
The same law applies to drawings and also paintings, you're also not allowed to just remove the frame with those.

I need to look it up but it's in the international copyright law i believe and it's only when you sell the art together with the frame, because an artist can pick a frame for his work which he believes fits it and so the frame becomes part of the art.

Comment by Anvh posted on Anyone sell at craft fairs? at 25/07/2011 - 19:11

Anvh
Spyder 3 elite, it does have a studio match function but that just match the settings where they calibrate with but those are already the same.

The colours do look almost the same though but the LCD looks more brilliant.

Comment by Anvh posted on Calibration 2 monitors at 25/07/2011 - 18:30

Anvh
I just bought a second monitor, he first one is a CRT and the second one an Eizo 2234.
they are both calibrated the same way but they still look different.

I can imaging it's because it are 2 different type of monitors but ain't sure, could someone maybe shine some light one this?

Comment by Anvh posted on Calibration 2 monitors at 25/07/2011 - 18:16

Anvh
You might not know it but if you put your photo in a frame they can't remove it you know because another frame might alter the intend you've with the photo so it's under the copyright law.

Comment by Anvh posted on Anyone sell at craft fairs? at 25/07/2011 - 17:46

Anvh
wvbarnes wrote:
Live view on the KR can be set for face detect, contrast AF or phase difference AF which I think is better but requires a double mirror operation.
It's not so much better more that they are differnt.
The plusses for contrast AF is that it use the actually image to adjust the focus so there are no focus errors.
Minus is that it's slower and it can't dedect if the focus has to move forward or backward so not good for tracking.

Phase AF has focus errors (front or back focus) but it can see if the focus has to move forward or backward and it's faster.

So for landscapes and everything that doesn't move basicly, contrast AF is more accurate for that, for everything else use Phase AF.

Since you mostly use live view on a tripod or on things that aren't moving i'll just use contrast AF for that.

Comment by Anvh posted on K-r magnified live view screen at 25/07/2011 - 17:43

Anvh
dcweather wrote:
Took some shots with the Sigma 150-500mm on a beanbag with lens VR on and off and couldn't tell the difference at 1/250th so no disaster if you leave it on accidentally.
No it doesn't have to be but if you make 100 photos like that and one is blurry then it could be the SR.

Comment by Anvh posted on Built in shake reduction. Does this really works? at 25/07/2011 - 16:44

Anvh
Have you calibrated your monitor so not then you can't judge your photos on that.

Comment by Anvh posted on K20D - image quality issues. at 25/07/2011 - 13:17

Anvh
The first DA 18-55 is of poorer design but the DA 18-55 MKII, DA-L & DA WR share the same optical design with the WR having new coatings.
So the WR could be ever so slightly better because of the coating.

Comment by Anvh posted on K20D - image quality issues. at 25/07/2011 - 10:27

Anvh
Reality is frequently inaccurate though

Comment by Anvh posted on Willing model? at 24/07/2011 - 22:18

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo