Lens calibration - Focus Tune software

johnriley
Posted 29/04/2013 - 14:11 Link
Quote:
Now apparently, according to this thread, I have to go into a high tech lab with specific software just to setup the camera before I even press the shutter.
That is not what this thread is saying at all, so it's a somewhat spurious argument really. You speak of two quite different things, the exposure control of a camera and the actual technical setting up of the hardware.

My feeling is that although a valid thing to include, the ability to change the AF calibration of a camera does open the opportunity for the end user to do some pretty dangerous messing. If you don't take a thoughtful and precise approach to the procedure the results may well be worse than not bothering at all.

I also agree with Ken, please don't make such bold remarks without some explanation for all our benefit. It doesn't help at all....:
Best regards, John
JAK
Posted 29/04/2013 - 14:26 Link
Come, come. One isn't going to kill the camera by making a slight AF adjustment for one lens. It's hardly dangerous messing, there to help misfocus issues when they arise and can be reset in an instant. Calling it dangerous messing is itself a bold statement.

The comments here about this software and adjustment are getting ludicrous now. So would you recommend the software identified by the OP or not and how useful would the results be on an ongoing basis?

John K
John K
Edited by JAK: 29/04/2013 - 14:31
johnriley
Posted 29/04/2013 - 14:34 Link
JAK, dangerous in the sense that the end user becomes capable of rendering all his or her lenses out of collimation. Obviously they can be put back as easily, they are not going to explode. Dangerous in the sense of "a little knowledge is dangerous".

Would I recommend the software? My opinion is that it is a useful idea, and looks as though it offers a sensible approach to AF calibration. I have used similar software concepts to test lenses and it works well. If I was of a mind to calibrate everything I would probably go that route and buy the software. As it happens, I don't feel the need to calibrate my lenses.

If I was using a test chart I would be very careful and precise, fixing the chart firmly in position and also using a solid tripod.

I think we've got the idea of how I would approach it by now!
Best regards, John
JAK
Posted 29/04/2013 - 14:46 Link
There are several reviews on the web and a respected forum discussion here with some who have tried it:

http://www.luminous-landscape.com/forum/index.php?topic=71660.0

The thread concludes, "I also use a 100mm macro, most often for macro shots, but sometimes as a mild telephoto. I suppose setting it for macro would really throw it off for greater distances."

That probably says it all.

John K
John K
johnriley
Posted 29/04/2013 - 15:11 Link
It does in one sense JAK, but probably not quite how you mean it. We need to be more logical in approach here. That is a thread on a forum, no more or less repsected that anything else because it's the observations of individuals.

It is not a scientific approach to try a product, as one writer does, but to say "but I didn't quite use the procedure laid down by the designer". This makes it instantly invalid as a fair test.

Also "I suppose, etc.," is not a test result. It's a wild guess. I suppose he's wrong. That's also a guess. Somebody should find out.

In any event, a little knowledge is still dangerous as the checking distance for lens testing is already well defined by manufacturers. You don't check a lens at macro distances for an overall correction. If you're trying something out for general purposes, probaly best to start with a general purpose lens anyway, to test the waters.

The issue isn't the software in this thread. The issue is, if you want to test the AF and adjust it then please follow the procedures carefully if you want a valid and repeatable result. I don't mind, but I wouldn't like to think of anyone being misled into making their focusing worse.
Best regards, John
JAK
Posted 29/04/2013 - 15:28 Link
Yes I agree this time! In my own case I have determined that the 100mm macro used close up is likely to be out and need a +4 adjustment. I can quickly apply that if needed. How the lens performs at infinity I have no idea, it may even front focus and need a negative adjustment, I don't know.

The software itself may well be brilliant but can only give a result for the lenses at the settings the tests are performed. I believe the camera setting is there to help solve specific problems when encountered as one would dial in a filter setting as required. The whole lot can be switched off in one go.

John K
John K
Edited by JAK: 29/04/2013 - 15:28
dpm
Posted 29/04/2013 - 16:07 Link
McBrian wrote:
dpm wrote:
The AF sensor is bolted to the base of the camera body. Nothing short of baseplate removal and mechanical adjustment is going to move it...
Nope, the sensor plate (oscillator plate) is not bolted to anything, it is held in position between the the front plate (permanent magnets) and the back plate by magnetic force (that's the simple explanation).

I'm guessing the adjustment is done by adjusting the resistance strength to the magnetic fields.
You are speaking of the AF sensor or the imaging sensor? Is it not true that the imaging sensor can only move in X and Y planes (and rotation) but is fixed in the Z direction?
Smeggypants
Posted 29/04/2013 - 16:52 Link
johnriley wrote:
JAK, dangerous in the sense that the end user becomes capable of rendering all his or her lenses out of collimation. Obviously they can be put back as easily, they are not going to explode. Dangerous in the sense of "a little knowledge is dangerous".
"Dangerous" ??? This is a simple AF adjustment. If the lens is front or back focussing then adjust the parameter until it isn't. There's nothing dangerous in anyway shape or form about it



Quote:

Would I recommend the software? My opinion is that it is a useful idea, and looks as though it offers a sensible approach to AF calibration. I have used similar software concepts to test lenses and it works well. If I was of a mind to calibrate everything I would probably go that route and buy the software. As it happens, I don't feel the need to calibrate my lenses.

If I was using a test chart I would be very careful and precise, fixing the chart firmly in position and also using a solid tripod.

I think we've got the idea of how I would approach it by now!
I think the software is the most non sensible way of adjusting AF that I've ever heard of. It's even more of a waste of money than focus charts.
[i]Bodies: 1x K-5IIs, 2x K-5, Sony TX-5, Nokia 808
Lenses: Pentax DA 10-17mm ED(IF) Fish Eye, Pentax DA 14mm f/2.8, Sigma 17-70mm f/2.8, Pentax-A 28mm f/2.8, Sigma 30mm F1.4 EX DC, Pentax-A 50mm f/1.2, Pentax-A 50mm f/1.4, Pentax-FA 50mm f/1.4, Pentax-A 50mm f/1.7, Pentax DA* 50-135mm f/2.8, Sigma 135-400mm APO DG, and more ..
Flash: AF-540FGZ, Vivitar 283
johnriley
Posted 29/04/2013 - 16:55 Link
You clearly won't be buying it then Mr S....
Best regards, John
Smeggypants
Posted 29/04/2013 - 16:55 Link
johnriley wrote:
If you don't take a thoughtful and precise approach to the procedure the results may well be worse than not bothering at all.

The results wont be worse. You set the AF parameter value so there is no front or back focussing. This value could be zero or anything else between -10 and +10
[i]Bodies: 1x K-5IIs, 2x K-5, Sony TX-5, Nokia 808
Lenses: Pentax DA 10-17mm ED(IF) Fish Eye, Pentax DA 14mm f/2.8, Sigma 17-70mm f/2.8, Pentax-A 28mm f/2.8, Sigma 30mm F1.4 EX DC, Pentax-A 50mm f/1.2, Pentax-A 50mm f/1.4, Pentax-FA 50mm f/1.4, Pentax-A 50mm f/1.7, Pentax DA* 50-135mm f/2.8, Sigma 135-400mm APO DG, and more ..
Flash: AF-540FGZ, Vivitar 283
johnriley
Posted 29/04/2013 - 16:57 Link
Are you really arguing that it doesn't matter if you don't do the job properly?
Best regards, John
Smeggypants
Posted 29/04/2013 - 17:03 Link
McBrian wrote:
dpm wrote:
"
AF sensor can't move, can it? Image sensor can't move fore/aft either. AF mirror- and therefore path length0 *could* move if the main mirror is stopped by a servo rather than a hard stop. Dunno if this is the case.
My understanding is the the micro adjustment does indeed move the sensor back and forth relative to the lens mount flange on a per lens basis (or global) depending on your choice from the lens adjustment menu.
The AF adjustment is nothing to do with the Image sensor

The AF sensor is mechanically adjustable via a screw(s) under the baseplate. however I think, and I'm not 100% sure on this, that the AF parameter in the custom menu doesn't physically move the AF sensor but rather applies a relative adjustment to the signal picked up by the sensor. This would make sense as the AF sensor is phase based and can, unlike the contrast method used by the image sensor, tell whether the image is front or back focussed.



Quote:

If you think about it, both the camera body and a lens have a tolerance stack, so the only constant between any lens and a camera body is the tolerance stack of the body, say all your lenses and camera both have a tolerance stack of ±0.05mm (and that's a very tight tolerance for a component stack), when you calculate that out using the lens flange as the datum there is an error of 0.2mm at max tolerance between the focal point of the lens and the sensor plane, that's a lot in a mass produced precision instrument.

There are other tolerances involved i.e. mirror box tolerances, focus screen position and tolerance, viewfinder etc. which will all have an input to what you see through the focus screen/lens so I can understand why we know have micro adjustment cabability in camera bodies and if a software solution helps to give me confidence that I've input the correct adjustment I'll go for it over my eyes any day.
Do you also use software to view the pictures you take?

Quote:

Jak and Smeggy must have 20/20 vision, something I would dearly love to have
Not at all. I can just see when a lens is front or back focussing. Like in the example JAK posted on page 2 of this thread.
[i]Bodies: 1x K-5IIs, 2x K-5, Sony TX-5, Nokia 808
Lenses: Pentax DA 10-17mm ED(IF) Fish Eye, Pentax DA 14mm f/2.8, Sigma 17-70mm f/2.8, Pentax-A 28mm f/2.8, Sigma 30mm F1.4 EX DC, Pentax-A 50mm f/1.2, Pentax-A 50mm f/1.4, Pentax-FA 50mm f/1.4, Pentax-A 50mm f/1.7, Pentax DA* 50-135mm f/2.8, Sigma 135-400mm APO DG, and more ..
Flash: AF-540FGZ, Vivitar 283
Smeggypants
Posted 29/04/2013 - 17:05 Link
johnriley wrote:
Are you really arguing that it doesn't matter if you don't do the job properly?
Of course I'm not. I'm arguing that to do the job properly you don't need focus charts, tripods or software
[i]Bodies: 1x K-5IIs, 2x K-5, Sony TX-5, Nokia 808
Lenses: Pentax DA 10-17mm ED(IF) Fish Eye, Pentax DA 14mm f/2.8, Sigma 17-70mm f/2.8, Pentax-A 28mm f/2.8, Sigma 30mm F1.4 EX DC, Pentax-A 50mm f/1.2, Pentax-A 50mm f/1.4, Pentax-FA 50mm f/1.4, Pentax-A 50mm f/1.7, Pentax DA* 50-135mm f/2.8, Sigma 135-400mm APO DG, and more ..
Flash: AF-540FGZ, Vivitar 283
Smeggypants
Posted 29/04/2013 - 17:05 Link
johnriley wrote:
You clearly won't be buying it then Mr S....
I wouldn't even use a freeware version
[i]Bodies: 1x K-5IIs, 2x K-5, Sony TX-5, Nokia 808
Lenses: Pentax DA 10-17mm ED(IF) Fish Eye, Pentax DA 14mm f/2.8, Sigma 17-70mm f/2.8, Pentax-A 28mm f/2.8, Sigma 30mm F1.4 EX DC, Pentax-A 50mm f/1.2, Pentax-A 50mm f/1.4, Pentax-FA 50mm f/1.4, Pentax-A 50mm f/1.7, Pentax DA* 50-135mm f/2.8, Sigma 135-400mm APO DG, and more ..
Flash: AF-540FGZ, Vivitar 283
johnriley
Posted 29/04/2013 - 17:42 Link
Well we have an intelligent audience here, so they can make up their own minds I'm sure.
Best regards, John

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo