yelvertoft

Joined: 31st August 2007

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

yelvertoft
Thanks for the heads-up on these rises. Chris at SRS has just got an order for a DA*50-135 a lot sooner than I was planning. Was procrastinating 'til I saw what I'd have to pay if I waited. Ho hum, it's only money.

Comment by yelvertoft posted on Lens Price Increases! at 06/06/2009 - 12:11

yelvertoft
I too baulked at the price of the dedicated cable/adapter set. With my K10D and Metz 58AF-1 I use wireless with the pop-up as controller for shots where all the bits are in the right places for this sort of use, applying flash compensation as needed.

Where the subject/camera/flash positions are not appropriate for use of wireless, I use a simple single contact non-dedicated remote cable/adapter and set the flash and camera to fully manual and enjoy the benefits of digital instant chimping/trial and error. I learn a lot by going through this process and can usually get it right pretty quickly these days.

If I'm using flash as remote off-camera I'm taking my time to set it all up in slow time, so don't really need p-ttl or any other auto mode.

Duncan

Comment by yelvertoft posted on Extension cord + Hotshoe adapter at 30/12/2008 - 12:35

yelvertoft
With the shades of black/white circles, you aren't supposed to get the upper and lower halves to match. The upper part of the circles are to show you where the bands are. You are supposed to adjust the contrast to set the white point - the shades of white in the lower half of the circle should be in discernible bands, and adjust the brightness to set the black point. Again, the black bands should be visible and not all the same shade of black in the lower part of the circle.

I adjust the brightness/contrast until I can just about clearly make out the boundaries between the black/white rings in the lower half of the circles. The upper part of the circles will not be identical at this point, but it will show you where the boundaries between the bands are.

I recommend setting the colour temperature on your monitor hardware to 6500K and the gamma to 2.2, assuming you are running a windows based system.

Having looked at the chart you linked to, I agree that the borders are all grey and the bottom right block is dark gey. The bottom left looks white to me. I checked this using an Eizo CG241W monitor calibrated with an xrite i1 display calibrator. I have no idea how accurate the jpeg image you linked to is.

Comment by yelvertoft posted on pantone hueypro problem at 28/12/2008 - 17:07

yelvertoft
bladerunneruk,

I have a hueypro, you may find this review and description of the setup process I wrote here:
http://www.worldphotographyforum.com/showthread.php?t=2342
to be useful.

When you are running through the calibration sequence, if you click on the question mark button onthe far right of the oval dialogue box, it gives more detail as to what you are supposed to be doing when you make the adjustments.

As for the colour tinges, your eyes have got used to the original colour temperature, usually too cool on most monitors, and it will take time for your eyes to get used to the corrected settings. Make absolutely sure your monitor is at its normal working temperature before you do any calibration. This will take at least 30 mins after switch on from cold.

Hope this is of use,

Duncan

Comment by yelvertoft posted on pantone hueypro problem at 28/12/2008 - 13:13

yelvertoft
Many thanks Darkmunk, and Rob, for the feedback and work that must have gone into this at a busy period in everyone's lives.

Thank you,

Duncan

Comment by yelvertoft posted on Fortnightly Competition #5 - Christmas at 28/12/2008 - 13:05

yelvertoft
Simple decorations

Comment Image

Comment by yelvertoft posted on Fortnightly Competition #5 - Christmas at 23/12/2008 - 14:25

yelvertoft
Another endorsement for SRS from me, can't fault them.

Comment by yelvertoft posted on Can SRS Microsystems be trusted? at 23/12/2008 - 14:10

yelvertoft
Something to possibly bear in mind is that the Pentax branded models will most likely get better support from 3rd party raw processing software vendors. For example, Phase One does not support Samsung cameras. This may or may not be important to you.

Comment by yelvertoft posted on Samsung and Pentax Difference at 23/12/2008 - 14:05

yelvertoft
If you have an old Pentax z50p, or many others of that vintage I suspect, you'll find the strap has a pair of small pockets built into it. I've tucked a couple of slow SD cards that wouldn't otherwise get used into these pockets to act as a backup if I ever I find myself in this situation.

Comment by yelvertoft posted on I'm soooo angry with myself! at 23/12/2008 - 14:01

yelvertoft
Another vote against Norton here. I use Kaspersky, which can be bought very cheaply indeed (£10.52 +P&P for 3 users, 1 year) from aria.co.uk

I have to admit, I'm seriously tempted by Eset NOD32 when the Kaspersky licence runs out as it has an excellent reputation for its low overhead.

Duncan

Comment by yelvertoft posted on Norton AV 360 at 29/07/2008 - 11:21

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo