All Forum Comments
Comment by thomastherhymer posted on Spyder 2 Express help at 25/07/2007 - 14:49
it has darkened the darker tones (relative to my calibrated by eye profile) so that there is a fair bit of loss of shadow detail, including on pictures that I didnt process (so its not just that my pics were processed to look good on my earlier profile)
any suggestions? should i now process all my pics with lighter blacks to get that shadow detail back into a visible range? or is there a problem with the spyder calibration?
the darker sections of the greyscale squares on the test image are harder to distinguish from each other than the rest of the greyscale scale. this suggests to me that it is indeed calibrating the darks too dark,
why? - and how can i fix it?
its also calibrated to a suprisingly yellow white point, however this might be a good thing as my prints have been coming out yellower than the screen image so it probably needed to go that way.
any comments or help appreciated!
Comment by thomastherhymer posted on Spyder 2 Express help at 25/07/2007 - 13:43
I was recently given an old tamron 90mm f2.5 macro
initial impressions is that its both quite sharp and quite nice for portraits.
lots of detail, not too much contrast, less than the smc 50mm.
not sure what they go for used, but i'm hanging on to mine.
90mm sometimes on the long side for indoor portraits though i'm finding.
and f2 would have been preferable.
the jupiter 85mm f2 can also be nice for portraits, lovely smooth bokeh, lovely modeling, but not at all sharp so only useful for intentionally soft shots. i don't really use mine except for the occaisonal abstract.
Comment by thomastherhymer posted on Portraits at 02/08/2007 - 22:53
Loads more money. That's the reason we have smaller sensors. The cheapest camera with a 24x36 sensor costs over £4,000. Compare that to a K10D.G
Comment by thomastherhymer posted on Portraits at 02/08/2007 - 20:49
From looking at the diagram it takes 16 photo detectors to generate one pixel, where as currently you only need 4.
however in a standard bayer array every pixel is next to a pixel of each other colour, seems like they should go for that in the high sensitivity array too, maybe by reducing the number of green pixels? why not 50% white and split the RGB equally? I'm sure they have their reasons, although they may not reflect the priorities we might have.
Comment by thomastherhymer posted on Kodak boosts digital camera sensitivity at 22/06/2007 - 11:45
Comment by thomastherhymer posted on Kodak boosts digital camera sensitivity at 22/06/2007 - 11:40
its actually more similar to the human eye (there are way more rods than cones in the eye)
it will improve B&W shots a lot too.
it seems like an excellent compromise, although a prism and 3CCD system would be better (but presumably too bulky and expensive for a DSLR)
I've always thought that the bayer array was a poor solution because it wastes 2/3 of the light...
Comment by thomastherhymer posted on Kodak boosts digital camera sensitivity at 22/06/2007 - 10:31
maybe theres a way of turning on profiling somewhere..
Comment by thomastherhymer posted on B&W Again again at 05/06/2007 - 16:08
Comment by thomastherhymer posted on B&W Again again at 05/06/2007 - 15:23
Comment by thomastherhymer posted on B&W Again again at 05/06/2007 - 14:48


i do often work in a bright environment but this particular issue is the same regardless. i calibrated with the light as low as i could get it.
any thoughts specifically on the black losing detail?
basically the issue is that the difference between greys of less than rgb value 20 each channel are so dark that no real detail is discernable. ie r20 g20 b20 is only barely lighter than r0 g0 b0