thespirit3

Joined: 17th December 2010

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

thespirit3
I'm surprised no one has mentioned the rough method(s) of calibration, see for example http://www.imaging-resource.com/ARTS/MONCAL/CALIBRATE.HTM

Most non professional LCDs are generally quite poor. I think on mine I can either distinguish all black levels or all white levels. Setting brightness/contrast somewhere in the middle obliterates both ends of the spectrum. This is on a good brand (I think Samsung?) 24" panel.

Likewise, I think I had trouble with the gammma too - although, a much cheaper monitor in work actually did a very good job.

I first noticed the issue when I uploaded a b/w set to Facebook. Looked great on my monitor yet from work the next day, horribly under exposed.

A very experienced photographer friend gave me this advice: "If you can't afford a colour accurate monitor, your best bet is to ignore your eyes and instead rely on the exposure graphs in your RAW editor". I guess in many ways he's right

In the case of my monitor, I'm unsure what good a £100+ calibration tool would do; the monitor seems incapable of rendering accurately despite all variations of brightness/contrast/colour-temperature/backlight/whatever.


Steve

Comment by thespirit3 posted on Monitor/Print Brightness Problem at 06/12/2012 - 15:14

thespirit3
Yes, listen to eddyc - OpenShot is a) free and b) better than many of the commercial solutions below £150. I spent a lot of time looking into all the mainstream products (AVS, Adobe, Sony) but the forums were generally full of comments suggesting difficult interfaces, massive learning curves, additional cost for specific plugins/codecs, instability and lack of support.

OpenShot may be basic, but it works well and supports all media formats I've thrown at it!

Check the main site here: http://www.openshot.org/ and find videos of the interface and results here: http://www.openshot.org/videos/

I forgot to say it can integrate with Blender for 3D modelled effects, too.

Steve

Edit: Of course, if you have a Mac, iMovie (or whatever it's called) will likely do everything you need

Comment by thespirit3 posted on Good - Free(ish) - Video-Editing Software? at 06/12/2012 - 14:57

thespirit3
Repeating what I've just posted on another thread - I tried a few different RAW processing tools (Windows and Linux) but ended up using Darktable (http://www.darktable.org/). It provides very similar functionality to Lightroom (perhaps lacking in some areas, providing more functionality in others) but is also 100% free. Not only that, but the developers respond very quickly to issues or requests for additional functionality.

I really can't praise it enough

For examples of the interface click on some of the blog posts at http://www.darktable.org/category/blog/


Steve

Comment by thespirit3 posted on Which RAW converter do you prefer? at 06/12/2012 - 14:47

thespirit3
Darktable is even better value than Lightroom

http://www.darktable.org/

Comment by thespirit3 posted on RAW processing at 06/12/2012 - 14:36

thespirit3
Windows explorer / photo viewer has destroyed many peoples photos. Why a 'viewer' needs to make permanent changes to a file just to rotate an image for display is beyond me. I hate to think what other changes it introduces (such as additional jpeg compression)...

Comment by thespirit3 posted on Digital Camera Utility 4 won't let me edit some images at 12/06/2012 - 11:34

thespirit3
I know Linux isn't everyone's cup of tea, but Darktable (a free lightroom clone) includes HDR functions. It's easily installable under Ubuntu.

Comment by thespirit3 posted on Free HDR software recommendations? at 12/06/2012 - 11:02

thespirit3
As a relative newcomer to photography and DSLRs (I learnt the basics years ago on a Fuji fixed lens SLR-like S2000) I was becoming disillusioned with Pentax after the Ricoh merger, lack of new models and the apparent focus on the 'designer' K-01. I was starting to think my (albeit modest) investment in Pentax lenses was a mistake - a mistake many Canon/Nikon users had warned me about during my initial research into Pentax.

However, now I see new models on the horizon I know I have nothing to worry about.

Sure, even if new models didn't happen I'd still be happy with my current kit - but I would be questioning the sanity in investing in further (expensive) glass for a brand which had no future.

As for comments regarding other manufacturers - as a newcomer to DSLRs I can't see the point in bodies without image stabilisation. In my opinion Pentax, Olympus, Sony and Minolta (from memory) are doing things 'the right way' and Canon/Nikon are tied to their legacy of expensive IS lenses.

To me, in-body IS (hence affordable lenses) and the K-mount are the major selling points. Weather sealing would be a nice bonus.

I'd upgrade my K-x for higher FPS, faster auto-focus, remote triggering of bracketing and more flexibility on long shutter times (for night/star-trail photography).

Steve

Comment by thespirit3 posted on Pentax Ricoh future at 29/05/2012 - 10:58

thespirit3
Thanks again for the comments. Playing with the DOF calculator (suggested by Smeggypants!) I see I massively over(under?)-estimated aperture size.

I try to ensure shutter speed is adequate for focal length used and the images don't show any obvious sign of camera shake - however this may be a contributing factor (in addition to poor choice of aperture and lens softness at chosen aperture).

I can't currently upload photos as I'm away from home. However, I think I can say that whilst the lens may not be perfect, in this instance my poor results are primarily due to inexperience.

I think I'll print some DOF charts as reminders for future photography trips rather than relying on application of general rules and 'gut instinct'...

Steve

Comment by thespirit3 posted on Kit 18-55 > F/16, soft? at 29/05/2012 - 10:21

thespirit3
Thanks for the comments - I'll try to find some typical examples and upload.


Steve

Comment by thespirit3 posted on Kit 18-55 > F/16, soft? at 27/05/2012 - 22:07

thespirit3
Hi All,

Quick question - I've recently returned from holiday where I spent a lot of time shooting landscapes (sea, cliffs, rocks etc). As I wanted everything in focus I (perhaps mistakenly) set the aperture quite small (f/16 to f/20). This was in bright sunshine so shutter speed wasn't an issue. Focal lengths vary across the range 18-55. Instead of sharpness the resultant images are all very soft. I only seem to notice this issue when using the kit 18-55 SMC DAL and only when pushing it beyond f/16. Photos taken around f/11 are (mostly) all pin sharp.

My 55-300 DA (despite being at the budget end of the market) is superb and I can't fault it in any way. Likewise, I haven't noticed similar problems with my 35mm f/2.4.

I know the kit lens is supposedly better than the competitions kit lenses but - in my case, is it more likely user error or just noticing the limitations of the 18-55 compared to my other/better lenses?

I have searched but seem to see mixed opinions ... so thought it worth asking here


Steve

Comment by thespirit3 posted on Kit 18-55 > F/16, soft? at 27/05/2012 - 15:24

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo