All Forum Comments
Comment by richandfleur posted on The dreaded K30 aperture motor failure strikes again at 21/08/2016 - 20:58
If you are going to attempt taking your camera apart, I highly recommend purchasing the online manual which details the disassembly steps. Specifically watch out for the top ribbon cable connector as this is extremely fragile
Comment by richandfleur posted on The dreaded K30 aperture motor failure strikes again at 17/08/2016 - 20:47
Also bear in mind that all marques have their own quirks and problem models, so the grass is definitely not greener. The last survey I saw showed that Pentax was top of the leaugue for reliability. Reliability is never 100% though.
The point here though is these owners feel abandoned by Pentax. The silence has been defening as such. No point in having a rugged weather sealed camera rated at 100,000 actuation etc if it's going to seriously fail within 2 1/2 years.
All companies have issues over time, and the response speaks volumes about the companies commitment and attitude.
Personally I find it pretty darn rude and feel it in other ways also, such as a lack of any feature enhancements via free firmware updates years later etc. That's another story really, but it's a question worth asking. Does Pentax value your commitment to their brand? Will they stand by you?
Comment by richandfleur posted on Dark screen on trying to review image's. What's this please? at 12/08/2016 - 10:38
a newer Pentax model that doesn't have any 'reputation' would always be a good choice
The first is the obvious, in that one never knows the product is a lemon until years down the track. Everyone loved the K-30 when it came out, but many were subsequently affected when it failed later on. Just because it's newer, doesn't mean Pentax have done anything differently. Their complete lack of public admission or knowledge of the fault is difficult to work with, because you're not really sure if they have resolved the issue or not. That K-70 does look mighty tempting, but...
this leads to the second point, in that it turns out the K-30 didn't use a different design than older Pentax models. And that's a real pain, because it means it was most likely a manufacturing/parts supply issue, rather than a dodgy design that they've subsequently be able to change and improve. I think we're all good now for future cameras personally, and I think we've exhausted the supply of dodgy components, but Pentax have never said so, or recalled those cameras with a serial number that puts them in the zone for having received the faulty parts etc. You just don't know, and that's planted a seed of doubt in those who have been affected. Essentially Pentax will only stand by their gear for just over two years, and that's a mix of pathetic, sad, frustrating etc. It hasn't been handled very well.
I've maintained for a while that Pentax has two APS-C model streams. The lower entry/consumer offering, and the higher spec pro/semi pro/serious enthusiast level. The only way to avoid this specific issue happening again is to move up from the K-30/50/70/S1/S2 range into the K-5/3 etc range which uses a different component to control this area. That said, it's most likely the case that the bad batch of components has been used up now, and new cameras will continue to operate with this same design as they did prior to the k-30/50 debacle. I do sympathise with any owner affected by this condition. They are the budget offerings, and sometimes even that can be a major outlay for some people, depending on your financial situation. Added with the complication of the repair being a sizeable chunk of the outright replacement price.
Comment by richandfleur posted on Dark screen on trying to review image's. What's this please? at 11/08/2016 - 22:32
Comment by richandfleur posted on This is not an add. It is real. at 10/08/2016 - 08:22
To be fair this sounds like an excellent independent service agent, rather than Ricoh or Pentax themselves, if you want to compare to Canon?
Comment by richandfleur posted on This is not an add. It is real. at 10/08/2016 - 06:36
Comment by richandfleur posted on what causes this? at 08/08/2016 - 07:15
Comment by richandfleur posted on Which domain name do you think is better? at 02/08/2016 - 01:14
Now that Pentax has the K-1 you have another tool available to you, should you require it's strengths. Basically the bigger the sensor, the better the camera tends to do in low light. Pentax offers sensors from the Q, to the APS-C to FF now and also MF. You simply pick the tool that suits your needs.
If you take shots mostly in the middle of the exposure area, as in fairly good light etc, then an APS-C camera should be fine. However, if your project requires something towards the extreme edges, then there is now a tool to step this up, in terms of depth of field and low light ability. That's pretty cool.
Comment by richandfleur posted on Buying another body at 21/07/2016 - 12:05
Comment by richandfleur posted on The dreaded K30 aperture motor failure strikes again at 20/07/2016 - 11:51


Repaired, the problem is not in the magnet.
link