All Forum Comments
Comment by PygmyTwittle posted on Death on the dial at 20/10/2006 - 10:40
Aperture, shutter speed and sensitivity are the three variables in exposure. Until digital came along, the only way to change sensitivity was to change film, and this seems to have restricted the design of digital SLRs for no reason. Even in the K10D, sensitiviy has not really reached equal status with aperture and shutter speed.
Since it has been suggested that Pentax might look to user forums for feedback/ideas, I thought I'd suggest the following:
Get rid of the mode dial. Have three e-dials - one on the front for shutter, and on the back, one for aperture and one (vertical maybe) for sensitivity). At the low end of the range, each dial would change to Auto. The sensitivity dial could be set up for 1/3 or 1/5 stop increments. For shutter, Bulb could be at the other end of the scale to Auto. The dials could be speed sensitive, so a quick flick would put you easily into Auto without having to spin all the way from the other end of the scale, or, if you think it important to be able to retain priority settings, have a single button which could be used with any dial, to toggle between Auto and the most recently set manual value.
And if you really must put all that scene mode stuff in, you can hide that away on a menu where ISO used to be!
What do you think? Anyone else been mulling over how to simplify dSLRs so we can spend more time looking through the lens?
PygmyTwittle
Comment by PygmyTwittle posted on Death on the dial at 19/10/2006 - 14:27
http://www.panasonic-batteries.com/site/Europe/English/products/products_batteri...
I think this technology is fairly new, so probably was not available when Pentax wrote the DS manual (Lithium, Ni-MH or Alkaline only).
I see some of you have tried the Uniross Lithium-ion rechargeables. I normally get on fine with Ni-MH - just sometimes I don't plan properly and need to buy some power when out and about, and CR-V3's can be tricky to get hold of sometimes.
PygmyT
Comment by PygmyTwittle posted on Panasonic Oxyride at 07/07/2006 - 13:27
Crikey.
Comment by PygmyTwittle posted on Bargain *ist DS at 05/07/2006 - 17:06
Thanks for your help,
PygmyT
Comment by PygmyTwittle posted on Picture Window Pro and RAW files at 10/07/2006 - 15:19
I thought I'd try shooting in AdobeRGB this weekend.
When I came to use C1LE, I got a bit confused about the colour management. I can pick the Camera Model and a Camera Profile, and also a Destination (working) colour space. When you process the image, options include converting to the Destination (working) space. But how does C1LE know which colour space the image was recorded in? It's certainly not embedded in the .PEF file (bit of an omission that). That suggests that the camera profile is really a 'tweaked' colour space (most appications seem to use colour space and profiles interchangeably), say sRGB, and that if you record in AdobeRGB, you must pick that as the Camera Profile.
Have I got this right?
PygmyT
Comment by PygmyTwittle posted on Picture Window Pro and RAW files at 10/07/2006 - 10:24
Of course, I couldn't resist trying SilkyPix, since the trial version allows full product mode for two weeks - once I got used to the crazy menu duplication and rather clumsy translation to English, it does seem pretty good.
PygmyT
Comment by PygmyTwittle posted on Picture Window Pro and RAW files at 07/07/2006 - 14:01
I was planning on getting a Lee filter holder and ND grad set soon - there is a white 'lens' cap which goes on the holder adapter which apparantly can be used for WB. I've not tried the custom WB on the camera yet - think I'll take a look tonight.
I just downloaded SilkyPix to try also, although there seem to be quite a few things missing from the 'free mode' which I assume will be the one which ships with new Pentax cameras.
Assuming all goes smoothly for the trial period, C1LE looks like the best option. That's where you say "could've told you that and saved you all that time trying this and that'. Still, you gotta learn what's wrong to know what's right, right?
Thanks,
PygmyT
Comment by PygmyTwittle posted on Picture Window Pro and RAW files at 05/07/2006 - 16:49
I tried C1LE and it seems to do a great job.
One thing I don't quite understand - With WB set to 'as shot', C1LE, BibblePro, PS raw plugin, RSE and Pentax PhotoLab all show a different colour temperature. Why is that? I know that the AutoWB camera setting will not do a perfect job and that some correction will be required, but it would be nice to know that the starting point is correct.
Also, with C1LE, the image will only display all pixels when at 100%/25% or at 400%/100%. When zoomed to 200%/50%, which would be a convenient size for previewing of the adjustments, it shows no more image pixels than 100/25. What's going on here?
PygmyTwittle.
Comment by PygmyTwittle posted on Picture Window Pro and RAW files at 05/07/2006 - 13:55
If I open a raw file through Photoshop using the raw plugin, it looks pretty much the same as through Pentax PhotoBrowser or Lab (full monitor profiling aside). I see that the PS plugin applies some default values for contrast and brightness, and as per the Pentax software, you can apply different WB settings, including 'as shot'.
If I open a raw file in Picture Window Pro, it will read the Pentax raw format and perform some contrast expansion, but doesn't apply any camera specific adjustments. The loaded image at this point is similar to the one in the PS plugin Open dialog with the contrast and brightness at 0 and no WB adjustment. There is a colour temperature adjustment available from the Colour Balance tool, which I can set to the same value as indicated by PS 'as shot', and then adjust contrast and brightness using the Brightness Curves tool and end up with a good image, but there is still a colour cast compared to the PS image, which appears to be mainly a lack of red saturation. I really like the Colour Balance tool in Picture Window Pro and it is easy to remove colour cast from incorrect white balance, but is there a way to access the 'as shot' WB setting from the raw file?
Having compared the converted RAW images from Pentax PhotoBrowser with those from PS and Picture Window Pro, I'd rather not use the Pentax s/w, which seems to introduce some messy black edges with its contrast adjustment and leaves odd blocks where colour changes should be smooth.
Does anyone have any suggestions as to a RAW workflow for Picture Window Pro, which would apply the 'as shot' white balance without manual fine tuning on every image?
I would also be interested in any opinions of any of the editors mentioned above. I'm also about to try RawShooterEssentials from PixManTec; anyone used that?
PS Is it me, or is it incredibly hard to remember colour accurately?
Comment by PygmyTwittle posted on Picture Window Pro and RAW files at 04/07/2006 - 13:45


I had a look at my old SF7 last night, which doesn't have a mode dial - you have the aperture ring on the lens (usually with an A setting) and an e-dial for shutter speed, which toggles in/out of Auto if you use the dial whilst holding a button - exactly as I described in my post above.
I haven't used it for ten years, but that must have been sitting at the back of my mind as an easier interface than 'modes' and a mode dial.
A camera can have sophisticated features like "sensitivity adjustable in 1/3 stops", without having to have a complicated interface, like Sv or TAv mode. The K10D already has the two e-dials - swapping the mode dial for a further e-dial for sensitivity wouldn't add any extra dials but would simplify the operation.
Really, MattMatic's reply illustrates exactly what I mean - "at least on the *istD". So I checked last night on my *istDS - the interface does let you adjust ISO to AUTO when in manual mode. I'd never actually taken a shot like that before - it fixes the ISO at 200 even thought the setting says AUTO. In fact, the manual does actually state that this will be the case for the K10D. But if you could have AUTO ISO in manual mode, how would it be different to TAv, that is what a meant in my original post.
The modes are unnecessary - why have a full manual mode in which you cannot adjust sensitivity easily (and then only in whole stops), but have a TAv mode in which you can manually adjust shutter and aperture but have auto iso which you can adjust with exposure compensation in 1/3 stops.
The K10D has the ability to adjust sensitivity in 1/3 stops, but you can't do it in full manual mode, just doesn't make any sense.
When you have just two parameters, you only need four modes - P, Av, Tv and M.
When you have three parameters, if you persist with the idea of modes, you really ought to have P, Av, Tv, Sv, TAv, TSv, ASv and M.
Much better to get rid of modes altogether - I have three parameters and for each, either I want to set it myself or I want the camera to control it - simple.
I know there are plenty of amazing photos out there which have been taken without the ability to control sensitivity so precisely, but if a camera is going to include such a feature (and I think that is a good thing), then it should be easy and it should be available in manual mode.
I'm going to give my completely unprofessional opinion and stake my non-existent reputation on this - there will be a dSLR which works the way I have suggested - I just hope it's a Pentax.
PygmyTwittle.