PygmyTwittle

Joined: 24th March 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

PygmyTwittle
I'm not objecting to grey importers.

The problem in this instance is that it does not appear to be obvious (judging by previous posts) that the products sold by this company are grey imports and without a UK warranty.

As an official Pentax site, some readers may believe, albeit incorrectly, that the advertisers, particularly those designated "Site Sponsor", have the support of Pentax and that the products they sell carry a UK warranty. You can imagine: "Sorry sir, not covered", "but I bought it from an ad on your site".

I think the site has an obligation to prevent readers from making this mistake. If someone is determined to get the cheapest deal on Pentax gear, they will be using google to search, checking amazon, ebay etc., so the people the ad may catch who would not otherwise have found this company are likely to be those who are perhaps a little less savvy.


I was also just expressing surprise that, as an official site, a grey importer is allowed to advertise and appear as a site sponsor. Unless of course, Pentax UK are aware and, for the reason stated by George, can use it as ammunition for getting a better deal when they make official imports...


Derek.

Comment by PygmyTwittle posted on Grey importer appears to be pentax user site sponsor at 17/08/2009 - 10:40

PygmyTwittle
Then maybe this site should not use Ads by Google.

Comment by PygmyTwittle posted on Grey importer appears to be pentax user site sponsor at 17/08/2009 - 09:47

PygmyTwittle
There are 'Site Sponsor' messages inserted between member posts.

I see there is one with a link to the Simply Electronics website. This company has been mentioned on this forum because they sell grey imports which are not covered by a UK warranty.

Admittedly, in the corner of the message it says 'Ads by Google' and they may well be the sponsor, not Simply Electronics, but it does seem a bit odd.

Isn't there a way to stop grey importers advertising on this site?


Derek.

Comment by PygmyTwittle posted on Grey importer appears to be pentax user site sponsor at 17/08/2009 - 08:55

PygmyTwittle
Thanks for that, but now you've done it! Now I've started looking, I'll be lucky to stop without spending some money.

I read your blog rant on feature-itis - I thought it was just me, especially when I posted 'death on the dial' on this forum about three years ago and no-one seemed to know what I was talking about.

Why do we need modes? Surely an e-dial for each of aperture, shutter speed and ISO, plus a spot meter, that's all we need.

Comment by PygmyTwittle posted on It's become difficult for PC builders! at 16/08/2009 - 17:53

PygmyTwittle
If it's one thing you do get when you buy a Dell or similar, it's good ducting and a reasonably quiet PC.

Robin, I'd be interested to know how you get on building a 'dead quiet' system.

Sometimes I like to work to music and sometimes I like silence, but the latter seems a bit out of the question, with the PC on the desktop two feet from my head! Liquid cooling was only just out when I built my PC and was ridiculously expensive.

Just had a look at your website Photografica and the images on flickr - particularly like 'red leg / white leg' and 'Z in light'. That's my kind of photography - finding beautiful shapes and colour in everyday, unremarkable places.

Derek.

Comment by PygmyTwittle posted on It's become difficult for PC builders! at 16/08/2009 - 14:52

PygmyTwittle
Yep, you are quite right, in the last couple of years, off-the-shelf PCs of reasonable performance are much cheaper.

When I built mine about three years ago, it was probably about half the cost of a ready-made.
I built mine to use with Sonar for music recording and particularly wanted to achieve low latency when recording guitar.

Thing is, apart from the obvious cost benefits due to the quantities, ready-mades are cheaper because they always compromise on something - it just depends on whether that is important to you. Ready-mades usually come with pretty average spec RAM and not the fastest of hard disk drives, both of which can have quite an effect on the performance if processing large image files.

Also, for the digital photographer, the graphics card is crucial - Ready-mades often come packaged with "high performance" graphics cards, because that's what the mass-market gamer wants. Whilst these graphics cards might be superb for speedy 3D game graphics, they usually lack one important feature - dual hardware path for the second screen output. I've used numerous ready-made PCs with two screens over the years and all of them display different colours on each screen - and yes, I do know what I'm doing with monitor adjustments and profiling and all that. If you've ever noticed this, just try swapping which screen is on which output - if the screen on output A previously showed a higher red tint, then it will still do so, and this is because the graphics card does not have identical harware for both outputs. If you are particular about colour because of your photography, what you really want is something like a Matrox graphics card, rock solid superb outputs to both screens, but rubbish for games - just try buying a ready-made with a Matrox!



I think I would still build my own, even now. In fact, maybe an upgrade is due, what with Windows 7 on the way...


Derek.

Comment by PygmyTwittle posted on It's become difficult for PC builders! at 16/08/2009 - 10:41

PygmyTwittle
Glad it turned out to be the motherboard and that your PC is now up and working.

FYI and in case it is of use in the future, just because the drives spin up, doesn't mean that the power suppy is okay.

A PC power supply has several different outputs, with different connectors, as I am sure you are aware since you built your PC!
However, there are different voltages on the outputs for the motherboard, CPU, drives etc. and it is perfectly possible for just one of these to fail. If the CPU output fails, for example, the drives will spin up and the motherboard POST will report that there is no CPU installed, which might make you think your CPU has failed, when it is in fact the power supply.

Also, an output may not fail entirely, just be a bit below the volatage required for stable operation. When fault finding on my current self-built PC, I ended up making probes from sewing pins, attaching them to the larger probes of a multi-meter, and testing the voltages on each of the pins of the motherboard connector whilst installed and under load, in order to determine a power supply fault.

A cheap PSU, like those that come packaged with desktop cases, is probably going to be unreliably or short lived. Paying a bit more is definitely worth it.


I've built a couple of PCs with parts from www.scan.co.uk and www.microdirect.co.uk - both have offered excellent delivery service, but be aware that you will usually have to take up warranty issues for OEM parts directly with the manufacturer.

I have to agree that getting parts for fixing a home-build is a real pain - CPUs move on so quickly, the chances of getting a new motherboard which supports your old CPU, RAM, graphics card etc. can be pretty slim after even just one year.


Anyway, glad your diagnosis turned out to be correct and that you got hold of a motherboard.

Derek.

Comment by PygmyTwittle posted on It's become difficult for PC builders! at 16/08/2009 - 08:13

PygmyTwittle
I bought the budget version of Capture One (before Silky Pix was available). I found, to my taste, it produced more pleasing colour/contrast than the Adobe converter, although from what I remember, with the default settings, the Adobe images were a bit sharper. I was also quite surprised at how the overall tone and tint could vary between converters, which must be down to how they act upon the colour temperature and white balance information.

So this could explain why I think the images are a bit lacking in this area - it might be the raw converter rather than the lens.

I also just noticed that you converted to AdobeRGB rather than sRGB - I seem to remember that, when you view an AdobeRGB profiled image through a non-profile-aware viewer, the colours will appear dull.

Just thought I'd point that out, in case my comments put someone off what I'm sure is, as you pointed out, a decent zoom for £100.

Derek.

PS Emma, sorry to hijack your thread with technical points, it just shows how hard it is to offer a truely accurate assessment of any lens. When someone posts a picture and says "this was taken with that lens", not much of what you see is down to the lens, even though all of the light that made the image came through the lens!

Comment by PygmyTwittle posted on zoom at 14/08/2009 - 12:51

PygmyTwittle
Sorry to hear that Davex. When shooting handheld, it's a contant battle between depth-of-field, motion blur and noise - losing three stops can't make it any easier!

I noticed you shot in DNG - which converter are you using?

There are just so many contributing factors to how an image appears when it is posted on the web, it's hard to determine which characteristics of the images are down to the lens.

Derek.

Comment by PygmyTwittle posted on zoom at 14/08/2009 - 12:10

PygmyTwittle
Hi Emma, Davex,

Please don't take this the wrong way, but Davex's photos are not really demonstrating the qualities of the lens and should not be used in order to make a purchasing decision one way or the other.

Personally, if I just took these images at face value, they would not encourage me to buy this lens. So I nipped over to Davex's flickr site to look at the EXIF data.


The problem is that all the images seem to show a bit of blur due to camera movement and quite possibly a bit of a back focusing issue.
Davex, were you using a tripod or the shake reduction? I would suggest that, whatever happened, 1/180s at 300mm, for example, was not sufficient to prevent blur.

Were you using autofocus? I would suggest that you test your lens (search the web for 'back focus') and use the K20D's adjustment feature to correct any problem. I have recently tested all my lenses, since buying a few with wide max apertures, and all required some adjustment. Back focusing will not show up too much with apertures like f/5.6 at short focal lengths, but it certainly will at 300mm.

The other possibility, in the case of the butterflies, is that you were a bit closer than the minimum focus distance of the lens.

I've not tried the Tamron 70-300, but I do have the Pentax DA50-200, DA*200 and DA*300. Obviously, the DA* lenses are superb, but a large part of the additional cost over the DA50-200 is in the larger max aperture and in the SDM in-lens focusing. I would say that the DA50-200 has a good measure of the excellent colour and contrast rendering abilities of the DA*s. In fact, I have found all my Pentax lenses to have these qualities, even the kit DA18-55 (although perhaps the least for this one).

Looking at the images, I would think that the Tammy does not compare favourably on colour/contrast, but obviosuly the conditions at the time of shooting are unknown to me and I have not compared the lens with a DA50-200.

Can anybody offer an opinion on the Pentax 55-300 ?




Sorry Davex - you have obviously chosen good subjects and thought about the framing. I didn't want to launch into an unsolicited criticism of your photos - I just wanted to make sure that Emma and other readers understand what they are looking at.


There are many posts on this and other forums where people question whether a lens is sharp, have they got a duff copy, others saying this lens is sharper than that lens and all that. Then when people post pictures, the reason for lack of sharpness usually turns out to be too slow a shutter for the focal length. I'm as guilty as the next man of trying to push the shutter speed in favour of lower ISO, it's just that we shouldn't be suprised when we don't get away with it!


Hope this is of help,

Derek.

PS Check out www.dofmaster.com, you will see how crucial focusing is at 300mm

Comment by PygmyTwittle posted on zoom at 14/08/2009 - 11:11

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo