PygmyTwittle

Joined: 24th March 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

PygmyTwittle
I've not owned a flashgun before, but since purchasing a *ist DS, photography is becoming quite a serious hobby.

Looking at the specs of the two Pentax flashguns, the only differences I can see are the guide number and the swivelling head on the 540.

I know that I will want to experiment with as many flash setups as I can, but what I don't know is which situations would demand the 540 and would find the 360 lacking. Could anyone offer any advice/relate any experience on this?

For the price of the 540, you can buy two 360's, and that would seem to open up a whole other set of possibilities.

With the *ist DS, you can't use the built-in flash to control a remote flash.
Does anyone know, if you have one flashgun on-camera and one off, can you use the on-camera gun to control the off-camera gun without it actually flashing during the exposure? I ask this because this would mean I wouldn't have to bother buying cables and hot-shoe adapters for this situation.

Thanks

Comment by PygmyTwittle posted on 360 or 540 FGZ ? at 26/06/2006 - 13:48

PygmyTwittle
Hi.

Does anyone know which omni-bounce fits the AF540FGZ?

Thanks

Comment by PygmyTwittle posted on AF540FGZ now in the UK at 15/06/2006 - 17:59

PygmyTwittle
One thing which may not be obvious is that assigning a default colour profile from the Colour Management page of the Display Properties does just about diddly squat. Assigning the default profile does nothing more than make it available to those apps which may want to use it.

When you run Adobe Gamma to create and save a profile, it makes an entry in the registry under

HKEY_LOCAL_MACHINESOFTWAREAdobeColorMonitor.

Run regedit and have a look. Run Adobe Gamma, create a few profiles with different filenames. Remember to Refresh the regedit display each time - you will see the Monitor Profile value change.

When you installed Adobe PS, it put a shortcut to Adobe Gamma Loader in your Startup folder (under your Documents and Settings). When you start Windows and login, the Adobe Gamma Loader looks at the registry setting, loads that profile and adjusts the display driver's colour map, replacing the standard sRGB colour map. So, all those apps which don't do any explicit colour managment themselves now uses the gamma adjusted colour map and therefore displays an adjusted image.

If you remove or change the default profile using the Colour Management page of Display Properties, this does not update the registry entry and Adobe Gamma Loader knows nothing about it. Hence, when you next restart/login, Adobe Gamma Loader ignores your change and loads the display driver with the profile indicated in the registry i.e. the last one saved through Adobe Gamma profiler. So if you are trying to compare different profiles, make sure you use Adobe Gamma to Load and resave. If you are trying to return to an uncalibrated state, either use Adobe Gamma to Load the standard sRGB profile, or move the shortcut to Adobe Gamma Loader out of the Startup folder; removing the profile from the Colour Management page will have no effect!

Things get a bit worse if you have tried both Adobe Gamma and WiziWYG - they both put their loader programs in the Startup folder and both try to update the display driver's colour map! I tried some deliberately awful profiles to make it obvious when the profile was being applied. I can see the desktop icons changing as each loader changes the driver's colour map at startup. Yikes. You should correct this by removing whichever loader is not required from your Startup folder.

Comment by PygmyTwittle posted on Basic Colour Management: C1 & PS at 26/06/2006 - 15:37

PygmyTwittle
Colour profiles include three bits of info: gamma correction, phosphor numbers and white point.

Programs like Adobe Gamma and WiziWYG only load the display driver with a colour map that applies gamma correction. This allows applications which do not have built-in colour management to benefit from gamma-corrected image display. If you set up profile which has the correct rather than default phosphor numbers in it, apps like Photoshop and Picture Window Pro which have full colour management will also apply the phosphor and white point adjustments - and your images will look different in these apps than non-colour managed image viewers.

If your images look "more correct" in other viewers but are wrong in PS, then the chances are it is the phosphor numbers which are wrong, not the gamma correction. Note that Soft Proofing using the monitor profile in PS will display the image as per a non-colour managed application i.e. with gamma correction but without phosphor/whitepoint correction - this may explain why your image only looks correct when you soft-proof with the monitor profile.

I discovered all this while trying to profile my Sharp 172A, starting from the awful profile supplied by Sharp!

Hope you find this info useful.

Comment by PygmyTwittle posted on Basic Colour Management: C1 & PS at 26/06/2006 - 14:10

PygmyTwittle
Thanks to everyone for their replies, particularly to Fernando for the link to the lens tests.

Having taken a more critical look at some of my photos, I think I should concentrate on improving my own skills before I start blaming the equipment. I think I might be showing early signs of LBA.

Still interested in seeing any examples from the DA40 or FA43, please post any links to flickr or ephotozine.

Thanks again,

PygmyTwittle

Comment by PygmyTwittle posted on FA primes vs DA primes at 27/03/2006 - 15:44

PygmyTwittle
Matt,

Thanks for the speedy reply and offer of help. I will send a RAW image or two after the weekend (I am at work, they are at home and I don't have broadband there).

I suspect the problem may be camera shake; I didn’t have a tripod with me in NZ and the one I have now is rather cheap and flimsy - I use the two second delay since I don’t have a cable release yet, but you can still see the thing shake when the shutter goes off!

I will also take a look through the camera settings in the .pef files – maybe the ones I’m not happy with are the ones with bigger apertures.

PygmyTwittle

Comment by PygmyTwittle posted on FA primes vs DA primes at 24/03/2006 - 17:17

PygmyTwittle
This is my first post, so hello to everyone.

I am new to photography (unless you count the SF7 I bought in 1989 with which I shot all of about 20 rolls of film before slinging it in the cupboard).
I trip to New Zealand in Nov 05 prompted me to buy a *istDS with the DA18-55 and DA50-200 zoom lenses. I have posted some of my first efforts on www.flickr.com where I have the same user id "pygmytwittle", so please feel free to view and criticise (constructively, I hope). I'm proud of last weekend's effort(http://static.flickr.com/38/114809468_faa66ab359_o.jpg), but I'm sure there must be some reasons why I shouldn't be!

My feeling so far is that I love the DS (I tried an EOS350 and D50 in the shop also), but sometimes feels that, despite my best efforts, the subject, whilst being the most in-focus part of the picture, seems a little soft, especially with things like people's hair.

From my various perusals of forums, there is a concensus that the DA18-55 is not a sharp lens, that the DA16-46 is better, but that the best quality can only be achieved by dropping zoom and going for primes. Leaving aside the second hand market of old lenses, the new Pentax options are either the FA offerings (31mm, 43mm and 77mm), or the current DA40 and later to be released 21mm (June) and 70mm (Oct).

On the DA series, the lack of aperture ring and the smaller glass due to the smaller image requirements mean that the lens is less expensive to make. Now, the DA40 RRP is £250 (£219 on the web) and the FA43 RRP is £400 (£314 on the web), so that should mean that the DA40 is on a par with the FA43 in terms of quality.

Can anyone tell me whether this is the case? Has anyone compared a DA40 and FA43 back to back? There are a lot of people who swear by their FA limited lens, but not many raving about the DA40. Is it an unsung hero or is it just not up to the FA quallity. If the soon-to-be-released DA21 and 70 are also that much cheaper than the FA equivalents but also of similar quality, then it is a much cheaper option in total, but since I am a bit of a believer in "you get what you pay for", I can't help thinking that the FA is the better option.

Factor in that the lens should last decades and that I would expect a full-frame sensor DSLR from Pentax/Samsung within its lifespan, I guess I've answered my own question. However, please post your thoughts on this issue.

While we're at it, has anyone compared the DA14 and DA12-24 back to back?

PygmyTwittle

Comment by PygmyTwittle posted on FA primes vs DA primes at 24/03/2006 - 16:44

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo