pentaxian450

Joined: 10th February 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

pentaxian450
My wife has some "no-slip table mats" used to keep her plate from moving on the table. Those are usually sold at places where they have supply for handicap people. I use those to remove stuck filters. I put the mat on the table, put the lens face down on the mat, then, exerting some downward pressure and holding the lens tight, I unscrew the lens from the filter, which is held in place by the mat. So far, it never failed.

Comment by pentaxian450 posted on Filter removal at 27/09/2011 - 21:35

pentaxian450
George Lazarette wrote:
"Tim was only asked to move the link, not to avoid posting it."
According to what I saw and read, it was not exactly like that, which is why I said in the previous post: "at first sight".

I respect your opinion, but I'd appreciate if you didn't take only the part of my post that suits you.

You can't argue the fact that moderators have a "power of life or death" in a forum, and that power should be used very carefully. It is very easy to overuse this power, and that can alienate a lot of people.

As far as I'm concerned, I haven't seen JR using this power in dictator's way, but I'm not privy of everything going on in the backstage, so we'll never know for sure.

The only thing I know for sure is that transparency goes a long way to show that you acted in good faith.

Comment by pentaxian450 posted on Tim? at 18/09/2011 - 13:22

pentaxian450
montyaus wrote:
Umps,refs and moderators have a job to do, why people will not accept their decision and move on is just plain silly to me.
I don't think there is anything silly in here. When you have absolute power like a moderator, and not necessarily or only on this forum, you must be very careful not to use that power in a manner that limits people's freedom of speech.

I realize that you can't tolerate posts that generate hate and intolerance, but the power to remove post should be used in a very careful manner, which, at first sight, doesn't seem to be the case here.

Trials are almost always public, so people can see by themselves that the "rules" were followed, but in this case, the moderator is judge, jury and executioner. That's a lot of power for a single person.

Comment by pentaxian450 posted on Tim? at 18/09/2011 - 12:53

pentaxian450
Smeggypants wrote:
They should release the next lower priced model as the K-y as well
Now, at last, we know why you call yourself "Smeggypants".

Comment by pentaxian450 posted on Pentax Q and other bits of info. at 16/09/2011 - 20:22

pentaxian450
[quote:3496ace15f="Smeggypants" That looks like a car for a roller coaster [/quote]Unfortunately, the roller coaster would collapse under it's weight. It's 29 tons, 9 meters long, and 2.5 meters high. It works on 380 V., and pulls up to 100 Amps. It can print up to 11.500 sheets an hour in a maximum size of 72cm. X 104cm.

Comment by pentaxian450 posted on Pixels per dot...a printing question at 16/09/2011 - 00:20

pentaxian450
Prieni wrote:
Yves, it seems that you are taking your hobby very serious.
Don't you?

Comment by pentaxian450 posted on Pixels per dot...a printing question at 15/09/2011 - 09:57

pentaxian450
In P-TTL mode, there is always a preflash. The camera determines the proper flash power from the info it gathers during the preflash. In order to see the second flash, the camera needs to be set on 2nd curtain flash, and you need to use a rather long exposure. In regular mode, the preflash and actual flash are so close to each other, the eye "sees" only one flash.

Comment by pentaxian450 posted on Trailing flash using built in flash on K5 at 13/09/2011 - 23:38

pentaxian450
There is no answer to that question. Bokeh is entirely subjective. What's good for one person is awful to another.

Comment by pentaxian450 posted on Lens with the best bokeh at 13/09/2011 - 01:15

pentaxian450
Anvh wrote:
The lens coating and the coating on the filter in front of the sensor blocks the high-end of the UV at least, that's the part a normal UV filter also blocks.
Seems to me a bit pointless to do that 3 times.
What might help is a Haze filter, that one also cuts out the lower ends of the UV light.
Take my word. When you're high up, you definitely get a blue haze in the pictures that will go away with a strong UV filter. The filter on the camera sensor is attuned to the UV wavelength at ground level, not the UV wavelength you get at 8000 meters. Snow will also reflect more UV than normal, hence the bluish cast.

Comment by pentaxian450 posted on Settings/PP for shooting in snow at 08/09/2011 - 01:22

pentaxian450
Snowy scenes also reflect a lot of UV light, especially in high mountain areas. Our eyes aren't too sensitive to UV light, but the sensor on your camera is, and that increases the blue hue you get on your pictures. Using a strong UV filter while taking the pictures will help in keeping the snow white.

Comment by pentaxian450 posted on Settings/PP for shooting in snow at 07/09/2011 - 21:32

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo