All Forum Comments
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 21:20
I can only see then as data field ' mismatches' ....I don't have an explanation for the actual origin of these strange descriptions ... But its not from the camera menus!
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 21:03
The real point here though is about the usefulness or relevance of camera settings to the OP's issue and question .... This exif discussion stems from mattmatic's post this morning where he saw 'hard' exif descriptions for the contrast and sharpness, and he suggested these setting may be a problem.
Now, I've seen these ' hard ' descriptors before and they don't bear any direct relation to actual camera custom image control values (which I'm saying here are most likely numeric plus and minus values). But we do still need to know for sure what settings are on place on the OPs camera .....I also have my doubts that it is just camera set contrast or sharpness settings that are causing the OPs disappointment ...... ?
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 19:19
If I understand it correctly, the reason the windows properties details tab is showing incorrect information (eg 'hard', ' 'normal''etc) and not the K3 specific settings is because the exif standard does not include all the Pentax data fields and therefore some sort of generic value is being generated where a possible match occurs.
Updates to PDCU would include additional camera specific data fields as they come out ....eg the ' fine sharpness' options were released in the firmware update, so were added into the updated version of PDCU afterwards.
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 16:08
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 15:21
In any case, in order to make any very specific suggestions for setting improvements we need to know the exact camera settings used. Perhaps its up to the OP, Bruce, to help here and provide more examples plus a list of key settings. I'd suggest going through on the camera and noting down each one.
I would say Bruce the key ones are white balance (pre-set plus fine tuning), exposure compensation (if any), and also the custom image settings (main preset plus all the individual sliders). If you're expecting good JPEGs from the camera then all of these are crucial, and would need reassessment for differing conditions and styles of shot.
If it seems harsh to be dismissing this matter as a case of ' photographer needs to learn about camera', then that is only based on what we've seen from you ... There is no evidence based on what you have said or shown to suggest any camera fault. You can grasp this opportunity for excellent help and advice and really get going with learning about DSLR photography ( there's a wealth of great knowledge and enthusiasm already in action right here ),.... Or if you're not really that committed to thinking about and considering the settings matters we've been talking about here, then it really is the case that the sophisticated K3 is not the best camera for you.
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 13:12
There will always be some people who prefer a certain new technology but I don't see mirrorless as being the revolution that some others proclaim it to be. I've yet to see a screen that can improve on reality or that reacts as quickly and I'm not convinced that an Olympus OM-D, Fuji XT-1 or Sony or Samsung mirrorless camera is sufficiently smaller and lighter than say an APSC DSLR for it to represent a paradigm shift over say a KS-2. I actually think Pentax are reading the market correctly in perceiving compact DSLR's such as KS-2 to be preferable to a mirrorless alternative.
I can see an advantage to mirrorless in low light situations but that's it!
There are good cameras on both sides of the divide, but I certainly don't see DSLR's becoming a minority in the serious enthusiast/amateur/pro market and fully expect them to remain the dominant technology for serious cameras and from the look of their model ranges I would say Canon, Nikon and Pentax plus the market statistics agree.
Jonathan
I do think there is room for developments in live view focussing aids and would welcome improvements with that as they come, but the autofocus situation with the OVFs we have is already very good .... My K7 can autofocus very accurately in pitch black! It has a green autofocus assist beam, and yes, range is limited and it will hunt in very difficult conditions, but then there's always the additional, faster and more accurate AF assist feature with the accessory flashguns.
Comment by McGregNi posted on Ricoh- big (ish) in Japan at 24/02/2015 - 12:12
The only program I know that exactly records all the Pentax DSLR camera settings is Pentax Digital Camera Utility.
As you know I'm not a K3 owner, but I'd be surprised if it used a setting such as 'hard' for contrast and sharpness control ... My assumption would be that it would continue the tradition of earlier models in using numeric plus and minus values.
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 11:08
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 10:05
.... well it certainly looks underexposed by about two stops which could be being caused by the white table cloth. The colour balance is wrong too, set to daylight or even AWB under tungsten lighting by the looks of it. It would be interesting to see some more general shots. ...
Regarding the tabletop shot of the camera and other equipment, I wouldn't expect ANY camera, of any particular type or design, to cope well with a scene like that ... Not without SOME basic user intervention and control. As Ken says, exposure and white balance are two issues that need consideration and photographer-led control, and that applies to any camera.
Of course the K3 is highly sophisticated and controllable, so there is a great deal to learn about and many ways to take that needed control. Even my (relatively) humble K7 offers 4 tungsten lighting WB presets, then the fine tuning option, plus a custom choice to automatically retain warmth if needed. It all adds up to the ability to get exactly the perfect result you need. The K3 will have even more choice and control.
Is there something like a Magic Lantern guide book published for the K3? If so, Bruce, I would really suggest it's worth a good read up on it all ... This type of book is much better than the manual for putting the controls and choices into a practical context, and giving new ideas for getting the best out of the camera, and more from the photography
Comment by McGregNi posted on Maybe just me or I have a rubbish K3 at 24/02/2015 - 09:48


As you know I'm not a K3 owner, but I'd be surprised if it used a setting such as 'hard' for contrast and sharpness control ... My assumption would be that it would continue the tradition of earlier models in using numeric plus and minus values.
Contrast High
Saturation Normal
Sharpness Hard
Not numbers. They weren't numbers on K20D either.
But I can't see contrast or sharpness having that big an effect.
Have all the rest of the MakerNotes, but not a good non-PP'd K3 image to compare it against.
K3 WB MakerNotes seem different to earlier models, 16 entries for starters, but this line seems wrong to me:
Kelvin WB Daylight 5205 0 2.216064453125 1.3848876953125
5205K is surely in the tungsten range? Much like the picture ...
Check the WB settings? If it's like on the K5, they aren't hard to adjust by accident when looking around the image in the immediate post capture image mode - if it times out on you.