McGregNi

Joined: 31st March 2012

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

McGregNi
Flash power settings depend on the operating mode ... If you are using P-TTL auto-flash exposure mode, then it is the flash system itself that determines the actual flash power that is discharged for each shot. This is based on calculations made instantly from the pre-flash light reflected back to the camera, and it also knows the aperture and ISO as well. In this case, you have some control over the output with Flash Compensation settings, both on the flashgun and the cameras ... This is set in 'stops' of compensation in a range of -2 to plus 1 stops.

The other common mode is manual, and the difference here is that the system is not measuring reflectance back from the subject ... Output is set as a fixed power level related to full power in ratios, eg 1/2 , 1/4, 1/32nd etc. You are not' compensating' for a measured output, so this is not 'Flash compensation'.

Both these methods of control are made using the main dial and select button on the flash ... They will be available appropriately as you change into each flash mode.

There is one more mode still useful on todays cameras, 'Auto-flash' A mode. This uses the flashes own light sensor to measure output required, and is especially helpful when using manual non-coupled lenses, because the system is told the aperture and ISO directly by the user. In this case, power adjustments are made by 'tricking' the flash into thinking that that camera is set differently ...eg, camera is set to ISO 100, but you dial in ISO 400 on the flash ... This will produce 2 stops less light than the system measures as needed.

Comment by McGregNi posted on Af 360 fgz help at 18/04/2015 - 06:08

McGregNi
It will all add up to more choice at the point when the FF is released. That will inevitably throw up new decisions for many of us, and having a deeper range at the aps-c level can only be a good thing, not the least for the bargain hunters looking at older stock!

It's logical to assume there will be carry-over of features from the latest 'innovations' model, just as that range benefits from high tech brought over from the K3. The K3ii will retain its pro-level feature list and higher level of system add-ons.

Comment by McGregNi posted on Right lets get the rumour mill rollin... K3 II at 16/04/2015 - 17:56

McGregNi
Looking at that screenshot from Steve, I'd say the folder is chosen from the 'export destination' button .... Click that and you'll be offered a box with your computer folders ready to choose.

If Picasa is already set to monitor that same folder then your photo should appear in Picasa also once you've finished the Export process in Cybelink.

As those export settings are 'preferences' then the folder will be remembered and all further images saved automatically to it each time you click on 'Export'.

Comment by McGregNi posted on Saving photo's on Cyberlink photo director V 6? at 16/04/2015 - 17:06

McGregNi
I know lens support has to be added to cameras for things like CA and distortion corrections. As far as I know MTF information is on the lens itself isn't it? So what other things, functionalities, can you need to add for new lenses like this? Autofocus motor support is already there isn't it, for both SDM and screw drive. Or do these new DC motors work differently .... I'd have assumed they still use the SDM contacts ....

Comment by McGregNi posted on New firmware K-3/K-S1/K-S2 at 15/04/2015 - 14:22

McGregNi
This is what DSLR photography is all about ... The ultimate versatile and cost effective tool. For bang per buck pure quality output it's hard to imagine any better equipment than you've used here. Some great results and very interesting to see the set-up, thanks!

Comment by McGregNi posted on *istDS macro shoot at 15/04/2015 - 13:46

McGregNi
I'm still happy with the K7 SR, both for video and stills. I do mostly use a hotshoe MIC and have never heard any sensor shake noises on an audio track.

I recently got my first long zoom for Pentax, and I find I can shoot perfectly sharply at 300mm with a 1/80th sec time value ... Very happy with that!

Comment by McGregNi posted on K-S2 & MX-1 at 14/04/2015 - 13:39

McGregNi
I've always been puzzled by that computer editing question, which I get a lot also. It seems to come with an unspoken undertone as in ' that's really cheating you're doing there, you know' .... It's almost as if they imagine I've stolen all the elements from pictures on the internet and reconstructed them into my own composited creation that defies the natural order. Try telling them that it's just a few tonal and colour corrections, but you still just get a glazed look.

It seems as if they believe that I really should have used a tiny point and click camera and just accepted whatever came out of it, and that would clearly he much better!

Comment by McGregNi posted on K3 receives unsolicited compliment at 14/04/2015 - 13:28

McGregNi
Makes sense Steve, thanks. I was confused by the references to the
noises being made by the SR ...? Boudou said he was shocked by the noise of the AF but ' then realised it was the SR' ....

And trying to 'correct' for movements in a video seems a rather bizarre concept ... Surely things are meant to move in a video !? ... Correcting for camera movements I can understand.

Comment by McGregNi posted on K-S2 & MX-1 at 14/04/2015 - 12:02

McGregNi
You're saying it has ' mechanical' sensor shake reduction in video? ?? Pentax might be getting at least one more customer soon! Can we get this verified folks, if so it signifies an excellent step back !

Comment by McGregNi posted on K-S2 & MX-1 at 14/04/2015 - 11:02

McGregNi
A great looking start with your new camera there! That shot has lovely depth

Comment by McGregNi posted on Day one with the K-3 at 13/04/2015 - 23:31

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo