golfdiesel

Joined: 12th January 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

golfdiesel
Image one is nice, if the background was a little more "black" so that the light hitting the background wouldn't distract as much then it would be a really nice image.
But I have to add that I have no idea how to get the background darker without changing the lighting of the subject.

Comment by golfdiesel posted on 2 movement images help choosing Please ! at 22/05/2007 - 21:48

golfdiesel
it's the combination of the extreme highlights and the dark eye's to me, and the beautiful model offcourse.
I really like the shot.
Sometimes doing things which you normally wouldn't do to an image turn out to give a nice result.

Comment by golfdiesel posted on White Balance? at 23/05/2007 - 12:59

golfdiesel
From what I have seen at a factory that makes the lenses for glasses, they had a lot of possibilities to apply different coatings to different lenses.
So you can, in theory apply different coatings to different lenses.

Comment by golfdiesel posted on K10D or....... at 22/05/2007 - 20:27

golfdiesel
If you got to this in 5 months then I can't wait to see what you throw at us in about a year...

For time is the biggest problem to get my skills better. It takes trial and error and you have to take your time for it. I hope that during the next summer holiday I can take more time to do some experimenting but I will have to wait to I get back from the holiday to see the results because I don't have a PC with me...

Comment by golfdiesel posted on Another Portrait up for your views at 20/05/2007 - 20:29

golfdiesel
mongoose, no need to apologise.
This forum is especially good in providing usefull information and I think that we all learn every day here.

Comment by golfdiesel posted on Rechargeable Batteries at 18/05/2007 - 07:42

golfdiesel
From a very nice website on this subject:
http://www.dansdata.com/gz011.htm

What you have seen is NOT the infamous memory effect, it is most likely the voltage depression effect which you and the OP have seen or are seeing.

Quote:

"Memory effect" is now used as a general term for anything that makes a battery not deliver its full capacity. What the term originally referred to, though, is a phenomenon that's probably never actually been observed in consumer hardware.

True memory only happens in sintered plate NiCd cells (which aren't necessarily the sort of NiCd you're using, and are of course completely different from any kind of NiMH cell), and it only happens when you precisely discharge a cell to exactly the same level over and over again, and recharge it without any overcharge. True memory effect happens in satellite power systems, electronics test labs, and practically nowhere else.
Quote:
"...What people nowadays call memory effect is a combination of two things.

One - cell aging. Batteries don't last forever. The older they get, the less capacity they have. Live with it.

Two - "voltage depression". Voltage depression is a problem with NiCd batteries and, according to some sources, also with NiMH, and it doesn't affect the battery capacity much at all. Rather, the battery voltage drops unusually quickly as it discharges. Gadgets that monitor their battery voltage therefore think the battery's flat earlier than they should. There may be lots of capacity left at the slightly depressed voltage, but the gadget doesn't know that and flashes its "low battery" warning.

Fully discharging cells cures voltage depression, but if you fully discharge a whole battery then the stronger cells in the battery will "reverse" the weaker ones. The weaker ones go flat first, and then get charged backwards by the others. This is very bad for the weaker cells, and will kill a battery pack quick smart. So don't do it..."

Comment by golfdiesel posted on Rechargeable Batteries at 17/05/2007 - 22:44

golfdiesel
In normal use you will never, ever, encounter the so called memory effect.
Memory effect is only seen in laboratory environments where they charge and discharge to the exact same level over and over again.
Since allmost all chargers use a -dV charging mode for determining the charge level they overcharge a battery a little everytime. This slight overcharging cancelles any form of memory effect if it would occur.

What most people think as being the memory effect is wear based on temperature and normal use.
Rechargeable batteries age quite quickly, you can't expect the same performance for two years or something.

For making the lifetime as long as possible you have to have a good charger which charges each battery individually and if you have the time to spare use a low charging current. Quick charging will make the life of the battery a lot shorter.

If you have a simple charger which charges the batteries in pairs or all four at a time then you have the added problem that the charger switches off when the cell with the lowest capacity is considered to be full.

So get a decent charger and charge the batteries with a low charging current. I use a 200mA current mostly.

Comment by golfdiesel posted on Rechargeable Batteries at 17/05/2007 - 17:37

golfdiesel
I recently made a few images of a building which has a very strange coating on the windows. The colour of the glass varies by time of day and time of year.
I drove past the building at about 7pm and the light was just beautifull. So these images allready had some metallic looking objects in them and suited the paper very good.
The only problem was to get the captured colours somewhat inside the gamut of the printing lab, those metallic coatings on glass can result in a lot of weird colours.

Comment by golfdiesel posted on Kodak Endura Metallic at 16/05/2007 - 15:31

golfdiesel
I just got a print back which was printed on the Kodak Endura Metallic paper.
This stuff is really great. Metallic objects look very real on this paper.
It is not cheap, but the effect is very nice. I have allso read that B&W images look especially good on this paper.

Comment by golfdiesel posted on Kodak Endura Metallic at 16/05/2007 - 13:45

golfdiesel
Quote:
Apparently the Samsung Schneider lenses lack SMC coating, but so do all other lenses that don't say PENTAX.
I have hear and read this before, but I still haven't seen any real proof of this.

Comment by golfdiesel posted on K10D vs Sony Alpha at 17/05/2007 - 11:42

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo